Teledyne WITHOUT DRIVER X FS Catalog CUSTOMER CUSTOMER P/N 2830R-SMT FSD WITH DRIVER DESCRIPTION MODEL NUMBER ASSIGNMENT SHEET (MNAS) OSCILLATOR TINY IG oscillator (SMT Mount), RoHS Compliant RF SPECIFICATIONS TUNING RANGE (GHz) POWER OUT (dBm) START 3.0 [1] +6 POWER VARIATION OVER TUNERANGE (dB) HARMONICS (dBc) -12 -70 +/-2 TEMPERATURE DRIFT (MHz) +/-45 HYSTERESIS (MHz) 15 FREQUENCY PUSHING (MHz/V) 2.0 FREQUENCY PULLING - 1.5:1 VSWR (MHz) 2.0 @ -100 SSB PHASE NOISE (dBc/Hz) 10 KHz 100 KHz @ -125 VDC @ VDC @ 70 20 VDC @ MAX MHz MAX OR +/- MAX MAX TYP TYP MAX MAX TYP TYP X X X X X MAX MAX X mA MAX mA MAX TYP mA MAX TYP TYP @ 25 ° C STEADY STATE COMM TUNING COIL RESISTANCE (Ohms) INDUCTANCE (mH) DRIVER MAX MAX X X TYP MIL SENSITIVITY (KHz/mA) TYP 3 dB BANDWIDTH (KHZ) TYP RESISTANCE (Ohms) INDUCTANCE (uH) OR MIL(S) X % ANALOG CIRCUIT POWER MAX X FM COIL TYP 300 400 1 TBD TYP MIN 15 X MAX MAX % TYP TYP TYP DIGITAL TO TUNING VOLTAGE (V) FROM X SCREENING ENVIRONMENTAL SPECIFICATIONS TEMP RANGE +10 DEG C TO +60 DEG C 8.0 7.0 10 % MAX TYP TYP mA SURGE AT TURN-ON SENSITIVITY (MHz/mA) STOP MAX MAX NON-HARMONICS (dBc) TUNING LINEARITY DC SPECIFICATIONS BIAS +8.0 -5V HEATERS n/a 6.00 TO MIN NO. OF BITS VDC @ VDC @ mA, MAX mA, MAX START WORD STOP WORD VDC @ mA, MAX LATCHING TRANSPARENT EDGE TRIG LEVEL TRIG OUTLINE IN-050088 PRODUCT CODE OTHER SPECS: [1] Zero current frequency to be 5.3GHz +/- 350MHz CONTROLLING DOCUMENT ASSIGNED BY MLK CUSTOMER DATE (SCD NO. IS 8/13/2014 ) REV X TELEDYNE