5349

SENSITRON
SEMICONDUCTOR
SHD687182
DATA SHEET 5349, Rev. A
HERMETIC SILICON CARBIDE RECTIFIER
DESCRIPTION: A 1200-VOLT, 2 AMP POWER SILICON CARBIDE RECTIFIER IN A HERMETIC SMD 0.2
PACKAGE
FEATURES:
 NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
 NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
MAXIMUM RATINGS
RATING
SYMBOL
MAX.
UNITS
PIV
1200
Volts
IO
2
Amps
IFSM
13
Amps
Pd
18.7
W
RJC
8
C/W
Top, Tstg
-55 to
+175
C
CHARACTERISTIC
TYP
MAX.
UNITS
MAXIMUM FORWARD VOLTAGE DROP (If =10A) Vf TJ=25 C
1.4
1.8
1.9
3.0
10
50
40
150
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT (With TC = 135 C)
MAXIMUM FORWARD SURGE CURRENT
O
(t = 8.3ms, Sine), TC = 25 C
O
MAXIMUM POWER DISSIPATION, TC = 25 C
MAXIMUM THERMAL RESISTANCE, Junction to Case
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTERISTICS
TJ=175 C
MAXIMUM REVERSE CURRENT (1200V PIV) Ir
TJ = 25 C
TJ = 175 C
TOTAL CAPACITIVE CHARGE (VR=1200V, IF=2A, di/dt=200A/s,
TJ=25C)
QC
TOTAL JUNCTION CAPACITANCE (Vr =400V, f=1MHz)
CT
Volts
μA
15
nC
11
pF
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SENSITRON
SEMICONDUCTOR
SHD687182
DATA SHEET 5349, Rev. A
Forward Voltage (V)
Reverse Voltage (V)
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SENSITRON
SEMICONDUCTOR
SHD687182
DATA SHEET 5349, Rev. A
MECHANICAL DIMENSIONS
SMD 0.2
SENSITRON
.213 ± .010 [5.41 ± .25]
SEMICONDUCTOR
.313 ± .010 [7.95 ± .25]
.125 [3.18] MAX
.179 ± .010 [4.55 ± .25]
.079 ± .010 [2.00 ± .25]
.030
+ .028
- .000
+ .70
[.76 - .00 ]
PIN 3
PIN 1
.075 ± .010 [1.90 ± .25] (2X)
.028 [.70] MIN
PIN 2
PINOUT TABLE
TYPE
SINGLE RECTIFIER
PIN 1
CATHODE
PIN 2
ANODE
PIN 3
ANODE
Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche
capabilities of the device are limited.
Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially
damaging conditions in their applications.
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SENSITRON
SEMICONDUCTOR
SHD687182
DATA SHEET 5349, Rev. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]