Negative Battery Voltage SLIC Protection GR-1089-CORE Intra-building Solution Solution Products TBU-PL060-200-WH Objective Compliance The SLIC (Subscriber Line Interface Circuit) provides all the BORSCHT functions such as battery, ringing, supervision between the codec and telephone hand set. This PortNote® solution protects negative battery voltage solutions against surge and power contact threats. GR-1089-CORE intra-building, issue 5, port type 4. • 120 Vrms, 25 A, 900 seconds withstand. • 130 Vrms maximum AC withstand. • Increased surge level to 5 kV, 500 A 2/10 µs. Solution 1 TBU® High-Speed Protector: TBU-PL060-200-WH 2 MOV Devices: MOV-10D201K MOV-10D201K GND Alternate Recommendations Other PortNote® Solutions: • SLIC Protection - GR-1089-CORE Intra-building Solution • Negative Battery Voltage SLIC Protection - ITU-T Solution • Dual Supply Voltage SLIC Protection - ITU-T Solution Benefit This solution provides a high level of protection in a small PCB area. VDD SLICTip SLIC Line 1 Line 1 MOV-10D201K SLIC RJ11 TBU-PL060-200-WH Design Kit MOV-10D201K SLICRing SLIC Line 2 VSS -VBAT PN-DESIGNKIT-20 The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. Americas: Tel +1-951 781-5500 Fax +1-951 781-5700 Europe: Tel +41-(0)41 768 55 55 Asia-Pacific: Tel +886-2 256 241 17 Fax +41-(0)41 768 55 10 Line 2 Fax +886-2 256 241 16 COPYRIGHT© 2012 • BOURNS, INC. • 6/12 • e/CPK1130 • “PortNote” is a registered service mark of Bourns, Inc. “Bourns” and “TBU” are registered trademarks of Bourns, Inc. in the U.S. and other countries. Bourns® PortNote® solutions provide protection recommendations for typical port threats. For more information, go to: www.bourns.com or email: [email protected]