MEC 7003S 200 W Pulse SSPA 2.7 GHz – 3.5 GHz • • • • • • • • • • • RF Performance 20% Maximum Duty 200 Wpk Minimum Power 2.7 to 3.5 GHz Output Power Flatness 0.5 dB 80 W Typ. Prime Power @10% -40 dBm/MHz Typ. Noise Power Density 25 dB Typical Rated Gain 9” L x 3.25” W x 1.5” H (22 x 8 x 6 cm) Weight 3 lbs. Max. -40° to 85° C Rack Mount Available Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) 2.7 230 200 Typ. Gain @ Spec. Power (dB) 25 2.8 230 200 25 2.9 230 200 25 3.0 230 200 25 3.1 220 200 25 3.2 220 200 25 3.3 210 200 25 3.4 210 200 25 3.5 210 200 25 Power Supply Requirements Voltage Min. Voltage Max. Current Max. Typical power output is shown to illustrate capability. 31Vdc 3.0 A Performance RFin SMA Input VSWR: ......................................1.4:1 .................... 2.0:1 Max. Duty .......................................... 20% ...................... 20% Max. Pulsewidth .............................. 300 µs ................ 100 µs Noise Power Density (dBm/MHz) ...................................... -40 ......................... -30 Prime Power ..................................... 80 W ................... 100W Connectors DC Screw Terminal 33Vdc Monitor 9 pin Dsub RF out SMA Monitoring Options Pout, Iavg, Duty Cycle, Gain, Temperature Typical Spec This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.7 GHz – 3.5 GHz 200 W Pulse SSPA ● MEC 7003S