MSX 100AB 1 kW Pulse SSPA 9.0 GHz – 10.0 GHz • • • • • • • • • • • RF Performance 20% Maximum Duty 1000 Wpk Minimum Power 9.0 to 10.0 GHz Output Power Flatness 0.5 dB 500 W Typ. Prime Power @10% -40 dBm/MHz Typ. Noise Power Density 60 dB Typical Rated Gain 13” L x 8.5” W x 2.5” H (32 x 21 x 6 cm) Weight 10 lbs. Max. -40° to 85° C Rack Mount Available Power Supply Requirements Voltage Min. Voltage Max. Current Max. 18 Vdc 16 A Connectors DC Screw Terminal 36 Vdc Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) 9.0 1000 1000 Typ. Gain @ Spec. Power (dB) 60 9.1 1050 1000 60 9.2 1050 1000 60 9.3 1100 1000 60 9.4 1150 1000 60 9.5 1150 1000 60 9.6 1150 1000 60 9.7 1100 1000 60 9.8 1050 1000 60 9.9 1050 1000 60 10.0 1000 1000 60 Typical power output is shown to illustrate capability. Performance Monitor 9 pin Dsub RFin SMA RF out WR90/TNC Monitoring Options Pout, Iavg, Duty Cycle, Gain, Temperature Typical Spec Input VSWR: ......................................1.4:1 .................... 2.0:1 Max. Duty .......................................... 20% ...................... 20% Max. Pulsewidth .............................. 300 µs ................ 100 µs Noise Power Density (dBm/MHz) ...................................... -40 ......................... -30 Prime Power .................................... 500 W ................. 550 W This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 9 GHz – 10 GHz 1kW Pulse SSPA ● MSX 100AB