MATERIAL DECLARATION Material Number PM3316S-series Product Line SHIELDED SMD POWER INDUCTOR Compliance Date 2009.07.01 RoHS Compliant YES No. Construction Element(subpart) MSL Homogeneous Material 2 Material weight [mg] Homogeneous Material\ Substances CASRN if applicable Materials Mass % 1309-37-1 1313-99-1 1314-13-2 1317-38-0 7440-50-8 N/A 7440-31-5 7440-22-4 7440-50-8 6088-52-0 N/A 7440-31-5 7440-02-0 6088-52-0 25068-38-6 60 10 20 10 95 5 96.5 3 0.5 100 90 7 3 100 63 Material Mass % of total unit wt. 39.6 6.6 13.2 6.6 15.2 0.8 0.772 0.024 0.004 8.7 2 0.2 0.1 4.7 0.945 68609-97-2 693-98-1 3 5 0.045 0.075 Carbon black 1333-86-4 3 0.045 Silicon dioxide 7631-86-9 26 0.39 1 Ferrite Material F4D 830 2 Winding Wire 2SFBW 200 3 Solder Lead free-solder 10 4 BASE LCP-E4008 110 5 BASE Terminal Electrode C5191/ Sn/ Ni 30 6 GAP LCP-E4008 60 Iron oxide (Fe2O3) Nickel oxide (NiO) Zinc oxide (ZnO) Copper oxide(CuO) Copper (Cu) Polyester Resin Tin (Sn) Silver (Ag) Copper (Cu) Aromatic polyester resin Phosphor bronze Tin (Sn) Nickel (Ni) Aromatic polyester resin 20 Bisphenol A Epoxy Resin Alkyd glycidyl ether Methyl imidazole 7 Adhesive 6020H-6-3 Total weight Headquarters Riverside CA Subpart mass of total wt. (%) 66 16 0.8 8.7 2.3 4.7 1.5 1260 www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 1 of 2 MATERIAL DECLARATION This Document was updated on: 2009.07.01 Important remarks: 1. It is the responsibility of the user to verify they are accessing the latest version Headquarters Riverside CA www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 2 of 2