MATERIAL DECLARATION Material Number PM125SH-series Product Line SHIELDED SMD POWER INDUCTOR Compliance Date 2009.07.01 RoHS Compliant YES No. Construction Element(subpart) MSL Homogeneous Material 2 Material weight [mg] 1 Ferrite Material F4D 2500 2 Winding Wire 2SFBW 400 3 Solder Lead free-solder 10 4 BASE LCP-E4008 170 5 BASE Terminal Electrode C5191/ Sn/ Ni 110 6 TAPE #560S 50 7 Adhesive 6020H-2 Total weight Headquarters Riverside CA 120 Homogeneous Material\ Substances CASRN if applicable Materials Mass % Iron oxide (Fe2O3) Nickel oxide (NiO) Zinc oxide (ZnO) Copper oxide (CuO) Copper (Cu) Polyester Resin Tin (Sn) Silver (Ag) Copper (Cu) Aromatic polyester resin Phosphor bronze Tin (Sn) Nickel (Ni) 1309-37-1 1313-99-1 1314-13-2 1317-38-0 7440-50-8 N/A 7440-31-5 7440-22-4 7440-50-8 6088-52-0 N/A 7440-31-5 7440-02-0 60 10 20 10 95 5 96.5 3 0.5 100 90 7 3 Nomex N/A 100 Material Mass % of total unit wt. 44.64 7.44 14.88 7.44 11.3 0.6 0.289 0.009 0.002 5 3 0.2 0.1 1.5 Bisphenol A Epoxy Resin Alkyd glycidyl ether 25068-38-6 63 2.3 68609-97-2 3 0.1 Methyl imidazole Carbon black Silicon dioxide 693-98-1 5 0.2 1333-86-4 7631-86-9 3 26 0.1 0.9 Subpart mass of total wt. (%) 74.4 11.9 0.3 5 3.3 1.5 3.6 3360 www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 1 of 2 MATERIAL DECLARATION This Document was updated on:2009.07.01 Important remarks: 1. It is the responsibility of the user to verify they are accessing the latest version Headquarters Riverside CA www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 2 of 2