MATERIAL DECLARATION Material Number PM5022S-series Product Line SHIELDED SMD POWER INDUCTOR Compliance Date 2009.07.03 RoHS Compliant YES No. Construction Element(subpart) MSL Homogeneous Material 2 Material weight [mg] 1 Ferrite Material F4D 2100 2 Winding Wire 2SFBW 600 3 Solder Lead free-solder 10 4 BASE LCP-E4008 248 5 BASE Terminal Electrode C5191/Sn/ Ni 62 6 Adhesive 6020H-6-3 Total weight Headquarters Riverside CA 100 Homogeneous Material\ Substances CASRN if applicable Materials Mass % Iron oxide (Fe2O3) Nickel oxide (NiO) Zinc oxide (ZnO) Copper oxide(CuO) Copper (Cu) Polyester Resin Tin (Sn) Silver (Ag) Copper (Cu) Aromatic polyester resin Phosphor bronze Tin (Sn) Nickel (Ni) 1309-37-1 1313-99-1 1314-13-2 1317-38-0 7440-50-8 N/A 7440-31-5 7440-22-4 7440-50-8 6088-52-0 N/A 7440-31-5 7440-02-0 60 10 20 10 95 5 96.5 3 0.5 100 90 7 3 Material Mass % of total unit wt. 40.4 6.7 13.5 6.7 18.2 1 0.29 0.009 0.001 8 1.8 0.14 0.06 Bisphenol A Epoxy Resin Alkyd glycidyl ether 25068-38-6 63 2.016 68609-97-2 3 0.096 Methyl imidazole 693-98-1 5 0.16 Carbon black Silicon dioxide 1333-86-4 7631-86-9 3 26 0.096 0.832 Subpart mass of total wt. (%) 67.3 19.2 0.3 8 2 3.2 3120 www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 1 of 2 MATERIAL DECLARATION This Document was updated on: 2009.07.03 Important remarks: 1. It is the responsibility of the user to verify they are accessing the latest version. Headquarters Riverside CA www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 2 of 2