PANASONIC ETQP6F1R1BFA

Choke Coils
Power Choke Coil
Japan
Singapore
PCCN6B
Series:
Industrial Property: Patents 3 (pending)
n Features
l Capable of corresponding big current
á Realization of non-saturation by Dust core ñ
( Reference : 27 A max.)
l SMD mount is possble
á Thin type (H):6.0 mm (W):12.5 mm (L):12.5 mm ñ
l Low loss
á Realization by Flat type wire ñ
n Recommended Applications
l DC/DC comverter for driving PC at high speed
l Thin type on-board power supply module for
exchanger(10 W to 40 W)
n Explanation of Part Numbers
E
T
Q
P
n Performance Specification Summary
Inductance (at 20 ¡C)
L1
Part Number
µH
ETQP6F0R6BFA
0.58
ETQP6F1R1BFA
1.06
ETQP6F1R8BFA
1.71
ETQP6F2R5BFA
2.45
Tol.
(%)
±20
DC (20 ¡C)
resistance
L2
Measurement
current
Measurement
current
µH
at 19 A
0.54
at 27 A
1.44
at 16 A
0.99
at 22 A
2.24
at 14 A
1.50
at 20 A
3.30
at 12 A
2.17
at 17 A
4.92
Reference Only
(Note1)
Measured Frequency of Inductance is 100 kHz
(Note2)
The measurement current value of L1 is the actual value of the current at which
the temperature of coil becomes 40 K when DC current flows.
mW
(max.)
Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.
Choke Coils
n Performace Characteristics(Reference)
DC Current VS Inductance
n Dimensions in mm (not to scale)
DC Current VS Temperature
n Connection
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,
,
,,,,,,
,
,,,,,,
,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,
,,,,,,
,
,,,,,,
,
:Clearance between the Terminal face
and the core face
:Clearance between the Terminal face
and mould resin
Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.