& *R AE oH C- SC Q2 O 00 MP Q LI UA A N LI T FI ED Ro VE LEA HS RS D C ION FRE OM S PL AR IA E NT * 0 13 % 2 25R0 1 8 01 2 A RIC AE C * A P Ro P R HS OV C ED OM (S PL el IAN ec T tM od el s) A ST CO Features Applications n TO-220 housing n Power supplies n Low inductance n Motor drives n Ceramic backplane n Test and measurement n High power rating n Rectifiers n AEC-Q200 qualified n RoHS compliant* PWR221T-30 Series Power Resistor General Information Bourns® PWR221T-30 Series is a TO-220 style power resistor made using thick film on alumina ceramic technology. It is used in current limiting, capacitor discharge or current measurement circuits in power supplies for telecom and industrial applications. Electrical & Thermal Characteristics Parameter Resistance (See Popular Resistance Values table) Power Rating @ 25 ˚C Case Temperature Tolerance TCR 0.100 Ω<R<130.0K Ω 0.050 Ω<R<0.100 Ω 0.020 Ω<R<0.050 Ω Thermal Resistance - Rthj Inductance Operating Voltage Dielectric Strength Insulation Resistance Operating Temperature Popular Resistance Values Value(s) 0.02 Ω to 130 KΩ 30 W** ±1 %***, ±5 % Code ±100 PPM/˚C ±300 PPM/˚C ±600 PPM/˚C 4.2 ˚C/W 0.1 µH maximum √P*R with a maximum of 250 V 2 KV AC 10 GΩ -55 ˚C to +150 ˚C ** Power rating of 2.25 W when mounted free to air (no heat sink). *** Available for most values. Check Popular Resistance Values table. Reliability Characteristics Parameter Short Term Overload (2x Pr for R < 2 Ω, 1.6 x Pr for R ≥ 2 Ω, V < 1.5 x Operating Voltage) Load Life (2000 hours at rated power) Thermal Shock (-55 ˚C to 155 ˚C, 5 cycles) Resistance to Soldering Heat (10 seconds at 270 ˚C) Vibration (20 G 10-2000 Hz .06 ” D.A.) Terminal Strength (MIL-STD-202, Method 211 Test A1) Shock (Saw Tooth: 100 g/6 ms) Humidity (Steady State) 1000 hrs. 85 °C/85 % RH High Temperature Exposure (100 hrs - 40 % Pr @ +125 °C) Material Characteristics Resistor....................................Thick film Substrate...................... Alumina (AL203) Housing.........................................Epoxy Pins....................Tinned Copper (Sn/Cu) Flammability......... Conforms to UL-94V0 Packaging Specification ΔR ±0.25 % ΔR ΔR ±1.0 % ±0.5 % ΔR ±0.5 % ΔR ±0.25 % ΔR ±0.2 % ΔR ±0.5 % ΔR ±0.5 % ΔR ±0.5 % Typical Part Marking RESISTANCE CODE MANUFACTURER'S TRADEMARK 221 30 R500 1% 902 COSTA RICA MODEL NUMBER TOLERANCE DATECODE R020 R025 R030 R033 R040 R050 R075 R100 R150 R200 R250 R300 R330 R400 R500 R750 1R00 1R50 2R00 2R50 3R00 3R30 4R00 5R00 7R50 8R00 10R0 12R0 15R0 20R0 25R0 27R0 30R0 33R0 40R0 47R0 50R0 56R0 75R0 Resistance Value 0.02 Ω*** 0.025 Ω*** 0.03 Ω*** 0.033 Ω*** 0.04 Ω*** 0.05 Ω*** 0.075 Ω*** 0.1 Ω 0.15 Ω 0.2 Ω 0.25 Ω 0.3 Ω 0.33 Ω 0.4 Ω 0.5 Ω 0.75 Ω 1Ω 1.5 Ω 2Ω 2.5 Ω 3Ω 3.3 Ω 4Ω 5Ω 7.5 Ω 8Ω 10 Ω 12 Ω 15 Ω 20 Ω 25 Ω 27 Ω 30 Ω 33 Ω 40 Ω 47 Ω 50 Ω 56 Ω 75 Ω Code 1000 1200 1500 2000 2500 3000 3300 4000 4700 5000 5600 7500 1001 1501 2001 2501 3001 3301 4001 5001 7501 1002 1502 2002 2502 3002 3302 4002 4702 5002 5602 6802 7502 8202 1003 1153 1203 1253 1303 Resistance Value 100 Ω 120 Ω 150 Ω 200 Ω 250 Ω 300 Ω 330 Ω 400 Ω 470 Ω 500 Ω 560 Ω 750 Ω 1.0 KΩ 1.5 KΩ 2.0 KΩ 2.5 KΩ 3.0 KΩ 3.3 KΩ 4.0 KΩ 5.0 KΩ 7.5 KΩ 10 KΩ 15 KΩ 20 KΩ 25 KΩ 30 KΩ 33 KΩ 40 KΩ 47 KΩ 50 KΩ 56 KΩ 68 KΩ 75 KΩ 82 KΩ 100 KΩ 115 KΩ 120 KΩ 125 KΩ 130 KΩ *** 5 % Tolerance COUNTRY OFORIGIN ............................................ 50 pcs./tube *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. PWR221T-30 Series Power Resistor Product Dimensions 10.41 ± 0.25 (.410 ± .010) 3.18 ± 0.25 (.125 ± .010) CL 1.38 ± 0.25 (.054 ± .010) 3.18 ± 0.1 (.125 ± .004) DIA. 8.38 ± 0.25 (.330 ± .010) CERAMIC 2.92 ± 0.25 (.115 ± .010) CERAMIC LC 3.18 ± 0.25 (.125 ± .010) 16.26 ± 0.25 (.640 ± .010) 9.14 ± 0.25 (.360 ± .010) CERAMIC 15.62 ± 0.25 (.615 ± .010) REFERENCE BOARD SURFACE 1.02 ± 0.25 (.040 ± .010) CERAMIC 2.54 ± 0.25 (.100 ± .010) 12.7 ± 1.27 (.500 ± .050) 0.72 ± 0.12 (.029 ± .005) 5.08 ± 0.25 (.200 ± .010) 1.03 ± 0.25 (.041 ± .010) Pulse Power Rating DIMENSIONS: MM (INCHES) 0.38 TOLERANCE: ± UNLESS OTHERWISE NOTED (0.015) How to Order PWR 221 T - 30 - 10R0 F 100 Model PWR = Power Resistor Package 220 = TO-220 Style Energy in Joules 10 Pin Style T = Through-hole Power 30 = 30 W 1 0.1 0.01 10 - 6 10 - 5 10 - 4 10 - 3 10 -2 Overload Duration in Seconds The energy absorbed by the resistor expressed in Joules can be calculated by multiplying the peak power of the pulse in watts times the length of the pulse in seconds. The energy should not exceed the limits shown in the graph. The overload voltage should not exceed 1.5 times the maximum operating voltage. Resistance Value <100 ohms.... “R” represents decimal point (examples: 7R50 = 7.5 Ω; R500 = 0.5 Ω) ≥100 ohms..... First three digits are significant, fourth digit represents number of zeros to follow (exam ples: 2000 = 200 ohms; 3002 = 30K ohms) Absolute Tolerance J=5% F=1% Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. PWR221T-30 Series Power Resistor Derating Curve 120 Power Ratio (%) 100 80 60 40 20 0 25 35 45 55 65 75 85 95 105 115 125 135 145 150 Case Temperature (°C) Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com REV. 02/16 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.