SMAJ5. 0 THRU SMAJ170 R TRANSIENT VOLTAGE SUPPRESSOR Reverse Voltage - 5.0 to 170 Volts PEAK PULSE POWER-300 Watts S E M I C O N D U C T O R FEATURES SMA(DO-214AC) 400 Watts Pulse capability Excellent clamping capability Low incremental surge resistance Fast response time High temperature soldering guaranteed: 260 C/10 seconds at terminals Component inaccordance to RoHS 2002/95/EC and WEEE 2002/96/EC 0.110(2.79) 0.100(2.54) 0.065(1.65) 0.049(1.25) 0.181(4.60 0.157(3.99) 0.012(0.305) 0.006(0.152) 0.090(2.29) 0.078(1.98) MECHANICAL DATA 0.008(0.203) MAX 0.060(1.52) 0.030(0.76) Case: JEDEC SMA(DO-214AC) molded plastic body Terminals: Solder Plated Polarity: Color band denotes cathode end Weight: 0.002ounce, 0.064 gram 0.208(5.28) 0.189(4.80) Dimensions in inches and (millimeters) DEVICES FOR BIDIRECTIONAL APPLICATIONS 1. For bi-directional use C or CA suffix for Types SMAJ5.0 through Types SMAJ170. 2. Electrical characteristics apply in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified) Symbols Valuse Units Peak power dissipation at TA=25 C,TP=1ms(Note 1.) PPK Min.300 Watts Steady state power dissipation at Tj=75 C lead length 0.375"(9.5mm)(Note 2.) PM 1.0 Watts Peak forward surge current,8.3ms single half sine-wave superimposed on rated load (JEDEC method)(Note 3.) IFSM 40 Amps 3.5 Volts -55 to +175 C Maximum instantaneous forward voltage at 35.0A for unidirectional only VF TJ,TSTG Operating jumction and storage temperature range Note: 1.Non repetitive current pulse and derated above TA=25 C 2.Mounted on copper pads area of 0.2X0.2"(5X5mm) 3.Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum JINAN JINGHENG ELECTRONICS CO., LTD. 13-22 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES( SMAJ SERIES) TYPE SMAJ5.0 SMAJ5.0A SMAJ6.0 SMAJ6.0A SMAJ6.5 SMAJ6.5A SMAJ7.0 SMAJ7.0A SMAJ7.5 SMAJ7.5A SMAJ8.0 SMAJ8.0A SMAJ8.5 SMAJ8.5A SMAJ9.0 SMAJ9.0A SMAJ10 SMAJ10A SMAJ11 SMAJ11A SMAJ12 SMAJ12A SMAJ13 SMAJ13A SMAJ14 SMAJ14A SMAJ15 SMAJ15A SMAJ16 SMAJ16A SMAJ17 SMAJ17A SMAJ18 SMAJ18A SMAJ20 SMAJ20A SMAJ22 SMAJ22A SMAJ24 SMAJ24A SMAJ26 SMAJ26A SMAJ28 SMAJ28A SMAJ30 SMAJ30A Breakdown Voltage V(BR)(Volts) MIN 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 MAX 7.30 7.00 8.15 7.37 8.82 7.98 9.51 8.60 10.3 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 JINAN JINGHENG ELECTRONICS CO., LTD. Test Current IT (mA) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reverse Stand off Voltage VWM(Volts) Maximum Reverse Leadage At VWM ID (uA) Maximum Peak Pulse Current Ippm (Amps) Maximum Clamping Voltage At Ippm VC(Volts) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 800 800 800 800 500 500 200 200 100 100 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 32.0 34.0 27.6 30.5 25.6 28.0 23.6 26.0 22.0 24.4 21.0 23.0 19.8 21.8 18.6 20.4 16.7 18.5 15.6 17.3 14.3 15.8 13.0 14.6 12.2 13.5 11.7 12.9 10.9 12.0 10.3 11.4 9.7 10.7 8.7 9.7 8.0 8.8 7.3 8.0 6.7 7.4 6.3 6.9 5.8 6.5 9.60 9.20 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 13-23 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES( SMAJ SERIES) TYPE Breakdown Voltage V(BR)(Volts) Test Current IT (mA) Reverse Stand off Voltage VWM(Volts) Maximum Reverse Leadage At VWM ID (uA) Maximum Peak Pulse Current Ippm (Amps) MAX MIN 5.3 5 SMAJ33 1.0 33.0 36.7 44.9 5.9 5 SMAJ33A 1.0 33.0 36.7 40.6 4.8 5 SMAJ36 1.0 36.0 40.0 48.9 5.4 5 SMAJ36A 1.0 36.0 40.0 44.2 4.4 5 SMAJ40 1.0 40.0 44.4 54.3 4.8 5 SMAJ40A 1.0 40.0 44.4 49.1 4.0 5 SMAJ43 1.0 43.0 47.8 58.4 4.5 5 SMAJ43A 1.0 43.0 47.8 52.8 3.9 5 SMAJ45 1.0 45.0 50.0 61.1 4.3 5 SMAJ45A 1.0 45.0 50.0 55.3 3.6 5 SMAJ48 1.0 48.0 53.3 65.1 4.0 5 SMAJ48A 1.0 48.0 53.3 58.9 3.4 5 SMAJ51 1.0 51.0 56.7 69.3 3.8 5 SMAJ51A 1.0 51.0 56.7 62.7 3.2 5 SMAJ54 1.0 54.0 60.0 73.3 3.6 5 SMAJ54A 1.0 54.0 60.0 66.3 3.0 5 SMAJ58 1.0 58.0 64.4 78.7 3.3 5 SMAJ58A 1.0 58.0 64.4 71.2 2.9 5 SMAJ60 1.0 60.0 66.7 81.5 3.2 5 SMAJ60A 1.0 60.0 66.7 73.7 2.7 5 SMAJ64 1.0 64.0 71.1 86.9 3.0 5 SMAJ64A 1.0 64.0 71.1 78.6 2.5 5 SMAJ70 1.0 70.0 77.8 95.1 2.7 5 SMAJ70A 1.0 70.0 77.8 86.0 2.3 5 SMAJ75 1.0 75.0 83.3 102 2.6 5 SMAJ75A 1.0 75.0 83.3 92.1 2.2 5 SMAJ78 1.0 78.0 86.7 106 2.5 5 SMAJ78A 1.0 78.0 86.7 95.8 2.0 5 SMAJ85 1.0 85.0 94.4 115 2.2 5 SMAJ85A 1.0 85.0 94.4 104 1.9 5 SMAJ90 1.0 90.0 100 122 2.1 5 SMAJ90A 1.0 90.0 100 111 1.7 5 SMAJ100 1.0 100 111 136 1.9 5 SMAJ100A 1.0 100 111 123 1.6 5 SMAJ110 1.0 110 122 149 1.7 5 SMAJ110A 1.0 110 122 135 1.4 5 SMAJ120 1.0 120 133 163 1.6 5 SMAJ120A 1.0 120 133 147 1.3 5 SMAJ130 1.0 130 144 176 1.5 5 SMAJ130A 1.0 130 144 159 1.1 5 SMAJ150 1.0 150 167 204 1.3 5 SMAJ150A 1.0 150 167 185 1.0 5 SMAJ160 1.0 160 178 218 1.2 5 SMAJ160A 1.0 160 178 197 1.0 5 SMAJ170 1.0 170 189 231 1.1 5 SMAJ170A 1.0 170 189 209 Notes: 1.V(BR) measured after IT applied for 300 S, IT=square wave pulse or equivalent. Maximum Clamping Voltage At Ippm VC(Volts) 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 2. For bidirectional types having VWM of 10 Volts and less, The ID limit is doubled. JINAN JINGHENG ELECTRONICS CO., LTD. 13-24 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES( SMAJ SERIES) FIG.2-PULSE DERATING CURVE PEAK PULSE POWER(PPP)or CURRENT(IPPM) DERATING IN PERCENTAGE,% FIG.1-PEAK PULSE POWER CURVE PPPM,PEAK PULSE POWER,KW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN In FIG.3 TA=25 C 10 1 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS 10mS 100 75 50 25 0 0 25 IFSM,PEAK FORWARD SURGE CURRENT, AMPERES 150 PULSE WIDTH(td)is DEFINED as the POINT WHERE the PEAK to 50% of IPPM 100 HALF VALUE-IPPM 2 10/1000usec.WAVEFORM as DEFINED by R.E.A. td 0 1.0 2.0 3.0 125 150 175 200 50 40 30 20 10 0 TJ=TJ max 8.3ms Single Half Sine Wave TJ=TJ max 1 10 4.0 100 NUMBER OF CYCLES AT 60HZ t,TIME,ms FIG.5-TYPICAL JUNCTION CAPACITANCE 10,000 CJ,JUNCTION CAPACITANCE,(PF) PEAK PULSE CURRENT-% Tr=10usec. 0 100 FIG.4-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.3-PULSE WAVEFORM 50 75 TA,AMBIENT TEMPERATURE,C Tp,PULSE WIDTH,sec. PEAK VALUE IPPM 50 TJ=25 C f=1.0MHZ Vsig=50mVP-P 1,000 MEASURED AT ZERO BIAS 100 MEASURED AT STAND-OFF VOLTAGE VWM 10 1.0 10 100 200 V(BR),BREAKDOWN VOLTAGE,VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 13-25 HTTP://WWW.JINGHENGGROUP.COM