Bourns Inductors ® Product Selection Guide 2 Bourns® Inductors I. Surface Mount Chip Inductors Product Capability Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Product Specifications: • CM Series Wirewound Sealed Chip Inductors . . . . . . . . . . . . . . . . . . . . . . . . .8 • CW Series Wirewound Open Chip Inductors . . . . . . . . . . . . . . . . . . . . . . . . .15 • CE Series Multi-Layer Ceramic Chip Inductor . . . . . . . . . . . . . . . . . . . . . . . .18 • CV Series Multi-Layer Ferrite Chip Inductor . . . . . . . . . . . . . . . . . . . . . . . . .20 • CS Series Multi-Layer Ferrite Shielded Chip Inductors . . . . . . . . . . . . . . . . .22 • CI Series Multi-Layer Ceramic Chip Inductors . . . . . . . . . . . . . . . . . . . . . . .28 • CF Series Multi-Layer Ferrite High Current Chip Inductors . . . . . . . . . . . .34 II. Surface Mount Power Inductors Product Capability Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Product Specifications: • SDR Series Non-Shielded Power Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . .47 • SRR Series Shielded Power Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 • SRU Series Shielded Power Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 III. Surface Mount Chip Beads Product Capability Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 Product Specifications: • MH Series High Current Chip Beads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156 • MG, MU, MZ Series High Impedance Chip Beads . . . . . . . . . . . . . . . . . . . .164 • MT Series Low Current/Low Impedance Chip Beads . . . . . . . . . . . . . . . . .172 • MA Series Chip Ferrite Bead Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177 IV. Through-Hole Inductors Product Capability Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 Product Specifications: • RLB Series Radial Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 • FSR1013 Radial Shielded Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 • PT121 Radial High Q Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191 • LPA Series Axial Power Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192 • LPV Series Radial Power Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193 V. Surface Mount Data Line Dual Chokes Product Capability Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196 Product Specifications: • DR221 Series Dual Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 • DR331 Series Dual Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 • DR332 Series Dual Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202 • SM-73818E Dual Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 1 I. Surface Mount Chip Inductors Product Capability Matrix ..........................................................................................4 • Product Selection Guide........................................................................................4 • Size Comparison Guide ........................................................................................4 • Inductance Range ..................................................................................................5 • Frequency Range....................................................................................................5 • Current Range........................................................................................................6 • Lab Kit Offering ....................................................................................................6 • Soldering Profile ....................................................................................................7 Product Specifications • Model CM45 Series 4.5mm Ferrite Wirewound Chip Inductors......................8 • Model CM32 Series 3.2mm Ferrite Wirewound Chip Inductors......................8 • Model CM25 Series 2.5mm Ferrite Wirewound Chip Inductors......................8 • Model CM20 Series 2.0mm Ferrite Wirewound Chip Inductors......................8 • Model CM16 Series 1.6mm Alumina Laser-Cut Chip Inductors ....................8 • Model CM10 Series 1.0mm Alumina Laser-Cut Chip Inductors ....................8 • Model CW25 Series 2.5mm Alumina Wirewound Chip Inductors................15 • Model CW20 Series 2.0mm Alumina Wirewound Chip Inductors................16 • Model CW16 Series 1.6mm Alumina Wirewound Chip Inductors................17 • Model CE20 Series 1.25mm Ceramic Multi-Layer Chip Inductor ................18 • Model CV20 Series 1.25mm Ferrite Multi-Layer Chip Inductor ..................20 • Model CS32 Series 3.2mm Ferrite Multi-Layer Chip Inductors ....................22 • Model CS20 Series 2.0mm Ferrite Multi-Layer Chip Inductors ....................24 • Model CS16 Series 1.6mm Ferrite Multi-Layer Chip Inductors ....................26 • Model CI20 Series 2.0mm Ceramic Multi-Layer Chip Inductors ..................28 • Model CI16 Series 1.6mm Ceramic Multi-Layer Chip Inductors ..................30 • Model CI10 Series 1.0mm Ceramic Multi-Layer Chip Inductors ..................32 • Model CF25 Series 2.5mm Ferrite Multi-Layer Chip Inductors ....................34 • Model CF32 Series 3.2mm Ferrite Multi-Layer Chip Inductors ....................35 • Model CF45 Series 4.5mm Ferrite Multi-Layer Chip Inductors ....................36 3 Surface Mount Chip Inductor Capability Matrix Product Selection Guide Technology Model Wirewound Construction Multi-Layer Open • • • • • • • • • • CE201210 CF252016 CF322513 CF453215 CI100505 CI160808 CI201210 CS160808 CS201212 CS321613 • • • • • • • • • CW160808 CW201212 CW252016 CM100505 CM160808 CM201212 CM252016 CM322522 CM453232 • • • • • • • • • • Shielded Preferred Models • • • Lab Kit Availability Size - mm (L x W x H) • • • • • • • • • • • • • 2.0 x 1.25 x 1.25 • • • • • • • • • • • • • • • • • • • • • • • CV201210 Sealed • • • • • • 2.5 x 2.0 x 1.6 3.2 x 2.5 x 1.3 4.5 x 3.2 x 1.5 1.0 x 0.5 x 0.5 1.6 x 0.8 x 0.8 2.0 x 1.25 x 1.0 1.6 x 0.8 x 0.8 2.0 X 1.25 X 1.25 3.2 X 1.6 X 1.3 1.6 X 0.8 X 0.8 2.1 X 1.5 X 1.3 2.75 X 2.6 X 2.0 1.0 x 0.5 x 0.5 • • • • • • • 1.6 x 0.8 x 0.8 2.0 X 1.25 X 1.25 2.5 X 2.0 X 1.6 3.2 X 2.5 X 2.2 4.5 X 3.2 X 3.2 2.0 x 1.25 x 1.25 Size Comparison Guide Description (Inches) 0402 0603 0805 1008 1206 1210 1812 (Millimeters) 1005 1608 2012 2520 3216 3225 4532 CM201210 CM252016 CM322513 CM453232 CW160808 CW201210 CW252016 CF322513 CF453215 Wirewound Sealed Wirewound Open Laser-cut Wire Multi-Layer Ceramic Multi-Layer Ferrite 4 CM100505 CI100505 CM160808 CI160808 CE/CI201210 CS160808 CV/CS201210 CF252016 CS321613 Specifications are subject to change without notice. Surface Mount Chip Inductor Capability Matrix Inductance Range Model 0.001 0.01 Inductance range µH 1.0 0.1 CE201210 10 100 1000 K CF252016 K CF322513 K J: ±5% CF453215 K K: ±10% CI100505 D CI160808 D CI201210 D D: ±0.3nH J M: ±20% J J CS160808 K CS201212 K CS321613 K K CW160808 J J CW201212 M CW252016 D CM100505 J J D CM160808 K J K CM201212 K CM252016 CM322522 M CM453232 K M K CV201210 D K J Frequency Range Frequency Range MHz (SRF) Model 0 5 10 50 100 500 10 1000 5000 GHz 15 GHz CE201210 CF252016 CF322513 CF453215 CI100505 CI160808 CI201210 CS160808 CS201212 CS321613 CW160808 CW201212 CW252016 CM100505 CM160808 CM201212 CM252016 CM322522 CM453232 CV201210 Specifications are subject to change without notice. 5 Surface Mount Chip Inductor Capability Matrix Current Range Current Range mA Model 0 100 200 CE201210 300 400 500 600 700 800 900 1000 All values of CE201210 have a 300 mA current rating CF252016 CF322513 CF453215 CI100505 CI160808 CI201210 CS160808 CS201212 CS321613 CW160808 CW201212 CW252016 CM100505 CM160808 CM201212 CM252016 CM322522 CM453232 1250 CV201210 Lab Kit Offering 6 Quantity Bourns Lab Kit Part Number Product Size (mm) Inductance Range Values Per Kit Per Value Total E Series CE201210-LAB1 2.0 x 1.25 x 1.25 0.047 µH to 33 µH 18 30 480 E12 / E6 CF252016-LAB1 2.5 x 2.0 x 1.6 0.1 µH to 33 µH 18 20 360 E12 / E6 CF322513-LAB1 3.2 x 2.5 x 1.3 0.12 µH to 33 µH 18 25 450 E12 / E6 CF453215-LAB1 4.5 x 3.2 x 1.5 0.1 µH to 33 µH 18 10 180 E12 / E6 CI100505-LAB1 1.0 x 0.5 x 0.5 1.0 nH to 100 nH 18 40 720 E12 / E6 CI160808-LAB1 1.6 x 0.8 x 0.8 1.0 nH to 220 nH 18 20 360 E12 / E6 CI201210-LAB1 2.0 x 1.25 x 1.0 1.0 nH to 220 nH 17 30 510 E6 CS160808-LAB1 1.6 x 0.8 x 0.8 47 nH to 2.2 µH 18 40 720 E12 / E6 CS201212-LAB1 2.0 x 1.25 x 1.25 47 nH to 33 µH 18 30 540 E6 CS321613-LAB1 3.2 x 1.6 x 1.3 47 nH to 33 µH 18 30 540 E6 CW160808-LAB1 1.6 x 0.8 x 0.8 4.7 nH to 220 nH 16 30 480 E12 / E6 CW201212-LAB1 2.1 x 1.5 x 1.3 2.2 nH to 910 nH 13 25 325 E6 CW252016-LAB1 2.75 x 2.6 x 2.0 10 nH to 4.7 µH 17 20 340 E6 CM160808-LAB1 1.6 x 0.8 x 0.8 1.5 nH to 100 nH 18 30 540 E12 CM201212-LAB1 2.0 x 1.25 x 1.25 3.9 nH to 1.0 µH 18 20 360 E6 CM252016-LAB1 2.5 x 2.0 x 1.6 10 nH to 100 µH 25 20 500 E6 CM322522-LAB1 3.2 x 2.5 x 2.2 0.1 µH to 220 µH 21 10 210 E6 CM453232-LAB1 4.5 x 3.2 x 3.2 0.1 µH to 1000 µH 25 10 250 E6 CV201210-LAB1 2.0 x 1.25 x 1.25 1.5 µH to 33 µH 18 30 510 E12 / E6 Specifications are subject to change without notice. Chip Inductor Soldering Profile Soldering Profile Specifications are subject to change without notice. 7 Features Applications High resistance to heat and humidity ■ Resistance to mechanical shock and pressure ■ Accurate dimensions for automatic surface mounting ■ Wide inductance range (1.0 nH to 1000 uH) ■ Lead free ■ ■ ■ ■ Mobil phones Cellular phones CTV, VCR, HIC, FDD CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors General Specifications Temperature Rise ......................................................................................................................................................................................................20 ˚C max. Ambient Temperature............................................................................................................................................................................................... 80 ˚C max. Operating Temperature...................................................................................................................................................................................-20 °C to +100 °C Storage Temperature.....................................................................................................................................................................................-40 °C to +100 °C Resistance to Soldering Heat .......................................................................................................................................................................260 ˚C, 5 seconds Materials Core Material CM10, CM16................................................................................................................................................................................................Alumina Ceramic CM20 ............................................................................................................................................................................................Polymer 10 nH to 1000 nH CM25 ..............................................................................................................................................................................................Polymer 10 nH to 180 nH CM32 ..............................................................................................................................................................................................Polymer 47 nH to 180 nH Ferrite Core CM25 ..........................................................................................................................................................................................................220 nH to 100 uH CM32 ........................................................................................................................................................................................................................220 nH + CM45 ...................................................................................................................................................................................................................................All Coil Type CM10, CM16 ...................................................................................................................................................................................................Copper plating CM20, CM25, CM32, CM45 ................................................................................................................................................................................Copper wire Enclosure CM10, CM16 ..................................................................................................................................................................................................................Resin CM20, CM25, CM32, CM45.................................................................................................................................................................................Epoxy resin Terminal CM10, CM16, CM20, CM25, CM32, CM45........................................................................................................................................................................Sn Product Dimensions DIMENSIONS ARE: MM (INCHES) Recommended Land Pattern Dimensions Model CM10 CM16 CM20 CM25 CM32 CM45 8 a 0.5 to 0.6 (.019 to .023) 0.8 to 1.0 (.032 to .039) 1.0 to 1.2 (.039 to .047) 1.4 to 1.5 (.055 to .059) 1.6 to 2.0 (.063 to .079) 2.4 to 2.6 (.094 to .102) b 1.5 to 1.7 (.059 to .067) 2.0 to 2.6 (.079 to .102) 3.0 to 3.8 (.118 to .150) 3.5 to 4.0 (.138 to .157) 4.0 to 4.6 (.157 to .181) 5.5 to 6.0 (.217 to .236) c 0.5 to 0.6 (.019 to .023) 0.7 to 0.9 (.028 to .035) 0.9 to 1.3 (.028 to .051) 1.2 to 1.6 (.047 to .063) 1.9 to 2.4 (.075 to .094) 2.0 to 3.0 (.079 to .118) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. • Customers should verify actual device performance in their specific applications. CM45, CM32, CM25, CM20, CM16, CM10 SMT Chip Inductors Packaging Specifications CM45 CM10, CM16, CM20, CM25, CM32 Model P2 P3 CM10 0.71 (.027) 1.21 (.047) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) A B W F E P1 2.00 (.079) 4.00 (.157) 1.50 (.059) 0.60 (.024) 0.27 (.011) øD0 øD1 t1 1.20 (.047) t2 CM16 1.00 (.039) 1.80 (.071) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 0.60 (.024) 0.27 (.011) 1.20 (.047) CM20 1.45 (.057) 2.25 (.089) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 1.00 (.039) 0.25 (.010) 1.55 (.061) CM25 2.40 (.094) 2.90 (.114) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) 1.10 (.043) 0.25 (.010) 1.85 (.073) CM32 2.80 (.110) 3.60 (.142) 8.00 (.315) 3.50 (.138) 1.75 (.069) 4.00 (.157) 2.00 (.079) 4.00 (.157) 1.50 (.059) — 0.25 (.010) 2.40 (.094) CM45 3.60 (.142) 4.90 (.193) 12.00 (.472) 5.50 (.217) 1.75 (.069) 8.00 (.315) 2.00 (.079) 4.00 (.157) 1.50 (.059) — 0.30 (.012) 3.50 (.138) Reel Dimensions Model CM10 A 178 (7.008) B C 60 min. 13 (.512) D 21 (.827) E 2 (.079) W 9 (.354) CM16 CM20 178 (7.008) 178 (7.008) 60 min. 13 (.512) 60 min. 13 (.512) 21 (.827) 21 (.827) 2 (.079) 2 (.079) 9 (.354) 9 (.354) CM25 178 (7.008) 60 min. 13 (.512) 21 (.827) 2 (.079) 9 (.354) CM32 CM45 178 (7.008) 178 (7.008) 60 min. 13 (.512) 60 min. 13 (.512) 21 (.827) 21 (.827) 2 (.079) 9 (.354) 2 (.079) 13 (.512) Packaging Model CM10 Quantity 10000 pcs Weight 150 g Model CM25 Quantity 2000 pcs Weight 100 g CM16 3000 pcs 90 g CM32 2000 pcs 190 g CM20 3000 pcs 90 g CM45 500 pcs 100 g Soldering Flow Soldering Infrared 260 °C maximum for 5 seconds (2 wave solder method) 200 °C for a maximum of 30 seconds. Peak of 240 °C for a maximum of 5 seconds. If the solder does not reflow simultaneously under each terminal, there may be a misalignment of the component on the board. For this reason, it is recommended that the inductor be adhered to the board prior to reflow. Vapor-phase Flow Soldering 215 °C for a maximum of 30 seconds. Infrared Soldering Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Vapor-phase Soldering 9 Chip Inductors - CM453232 Series Wirewound Lead Free 1812 Size Part Number CM453232-R10ML CM453232-R12ML CM453232-R15ML CM453232-R18ML CM453232-R22ML CM453232-R27ML CM453232-R33ML CM453232-R39ML CM453232-R47ML CM453232-R56ML CM453232-R68ML CM453232-R82ML CM453232-1R0KL CM453232-1R2KL CM453232-1R5KL CM453232-1R8KL CM453232-2R2KL CM453232-2R7KL CM453232-3R3KL CM453232-3R9KL CM453232-4R7KL CM453232-5R6KL CM453232-6R8KL CM453232-8R2KL CM453232-100KL CM453232-120KL CM453232-150KL CM453232-180KL CM453232-220KL CM453232-270KL CM453232-330KL CM453232-390KL CM453232-470KL CM453232-560KL CM453232-680KL CM453232-820KL CM453232-101KL CM453232-121KL CM453232-151KL CM453232-181KL CM453232-221KL CM453232-271KL CM453232-331KL CM453232-391KL CM453232-471KL CM453232-561KL CM453232-681KL CM453232-821KL CM453232-102KL Inductance uH 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tolerance ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % Q min. Test Frequency MHz SRF min. MHz RDC ohm max IDC mA max 35 35 35 35 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 40 40 40 40 40 40 40 40 40 30 30 30 30 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 300 280 250 220 200 180 165 150 145 140 135 130 100 80 70 60 55 50 45 40 35 33 27 25 20 18 17 15 13 12 11 10 10 9 9 8 8 6 5 5 4 4 3.5 3 3 3 3 2.5 2.5 0.18 0.2 0.22 0.24 0.25 0.26 0.28 0.30 0.32 0.36 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.90 1.00 1.10 1.2 1.4 1.6 2 2.5 2.8 3.2 3.6 4 4.5 5 5.5 6 7 8 8 9 9.5 10 12 14 18 26 30 30 35 40 800 770 730 700 665 635 605 575 545 520 500 475 450 430 410 390 380 370 355 330 315 300 285 270 250 225 200 190 180 170 160 150 140 135 130 120 110 110 105 102 100 92 85 80 62 50 50 30 30 TIGHTER TOLERANCE AVAILABLE ON REQUEST. CONSULT FACTORY. 10 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Chip Inductors - CM322522 Series Wirewound Lead Free 1210 Size Part Number CM322522-47NML CM322522-56NML CM322522-68NML CM322522-82NML CM322522-R10ML CM322522-R12ML CM322522-R15ML CM322522-R18ML CM322522-R22ML CM322522-R27ML CM322522-R33ML CM322522-R39ML CM322522-R47ML CM322522-R56ML CM322522-R68ML CM322522-R82ML CM322522-1R0KL CM322522-1R2KL CM322522-1R5KL CM322522-1R8KL CM322522-2R2KL CM322522-2R7KL CM322522-3R3KL CM322522-3R9KL CM322522-4R7KL CM322522-5R6KL CM322522-6R8KL CM322522-8R2KL CM322522-100KL CM322522-120KL CM322522-150KL CM322522-180KL CM322522-220KL CM322522-270KL CM322522-330KL CM322522-390KL CM322522-470KL CM322522-560KL CM322522-680KL CM322522-820KL CM322522-101KL CM322522-121KL CM322522-151KL CM322522-181KL CM322522-221KL Inductance uH 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 Tolerance ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % Q min. Test Frequency MHz SRF min. MHz RDC ohm max IDC mA max 10 10 10 10 10 10 10 10 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 20 20 20 20 20 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 680 600 540 500 450 400 350 320 230 210 190 175 160 150 135 125 115 100 90 85 80 75 65 60 55 50 45 40 36 33 30 27 25 22 20 20 15 15 15 11 10 10 8 7 7 0.20 0.22 0.25 0.27 0.30 0.67 0.72 0.81 0.29 0.32 0.35 0.39 0.44 0.49 0.55 0.61 0.69 0.75 0.75 0.82 0.95 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.1 2.5 2.8 3.3 3.7 5.0 5.6 6.4 7.0 8.0 9.0 10 10 11 15 17 21 450 420 400 380 360 240 230 220 360 345 330 305 290 275 260 245 230 215 210 200 190 180 180 175 165 160 150 140 140 125 120 110 105 90 85 80 75 70 65 60 60 55 50 50 45 TIGHTER TOLERANCE AVAILABLE ON REQUEST. CONSULT FACTORY. NOTE: 47 nH TO 180 nH ‘AIR CORE’ / 220 nH TO 220 uH ‘FERRITE CORE’ Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 11 Chip Inductors - CM252016 Series Wirewound Lead Free 1008 Size Part Number CM252016-10NKL CM252016-12NKL CM252016-15NKL CM252016-18NKL CM252016-22NKL CM252016-27NKL CM252016-33NKL CM252016-39NKL CM252016-47NKL CM252016-56NKL CM252016-68NKL CM252016-82NKL CM252016-R10KL CM252016-R12KL CM252016-R15KL CM252016-R18KL CM252016-R22M CM252016-R27M CM252016-R33M CM252016-R39M CM252016-R47M CM252016-R56M CM252016-R68M CM252016-R82M CM252016-1R0KL CM252016-1R2KL CM252016-1R5KL CM252016-1R8KL CM252016-2R2KL CM252016-2R7KL CM252016-3R3KL CM252016-3R9KL CM252016-4R7KL CM252016-5R6KL CM252016-6R8KL CM252016-8R2KL CM252016-100KL CM252016-120KL CM252016-150KL CM252016-180KL CM252016-220KL CM252016-270KL CM252016-330KL CM252016-390KL CM252016-470KL CM252016-560KL CM252016-680KL CM252016-820KL CM252016-101KL Inductance uH 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±20 % ±20 % ±20 % ±20 % ±20 % ±20 % ±20 % ±20 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % ±10 % Q min. 10 10 10 10 15 15 15 15 15 15 15 15 10 10 10 10 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 15 Test Frequency MHz 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 SRF min. MHz 2500 2200 1800 1550 1350 1150 1000 890 770 670 590 520 460 400 340 300 230 210 190 175 160 150 135 125 115 100 90 85 80 75 65 60 55 50 45 40 32 30 28 25 22 21 20 18 17 16 15 13 12 RDC ohm max 0.32 0.34 0.38 0.4 0.43 0.47 0.51 0.55 0.59 0.63 0.68 0.73 0.80 0.87 0.98 1.05 0.70 0.75 0.85 0.95 1.00 1.10 1.25 1.40 0.65 0.75 0.85 0.95 1.05 1.2 1.3 1.4 1.6 1.8 1.9 2.2 3.5 3.8 4.4 5.0 5.8 6.3 7.1 9.5 11.0 12.1 16.6 19.0 21.0 IDC mA max 280 270 255 250 240 230 220 215 205 200 190 185 175 170 160 155 190 180 170 160 155 150 140 130 195 180 170 160 155 145 135 130 125 120 115 105 80 75 70 65 60 115 110 90 80 75 70 65 60 TIGHTER TOLERANCE AVAILABLE ON REQUEST. CONSULT FACTORY. NOTE: 10 nH TO 180 nH ‘AIR CORE’ / 220 nH TO 220 uH ‘FERRITE CORE’ 12 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Chip Inductors - CM201212 Series Wirewound Lead Free 0805 Size Part Number CM201212-10NKL CM201212-12NKL CM201212-15NKL CM201212-18NKL CM201212-22NKL CM201212-27NKL CM201212-33NKL CM201212-39NKL CM201212-47NKL CM201212-56NKL CM201212-68NKL CM201212-82NKL CM201212-R10KL CM201212-R12KL CM201212-R15KL CM201212-R18KL CM201212-R22KL CM201212-R27KL CM201212-R33KL CM201212-R39KL CM201212-R47KL CM201212-R56KL CM201212-R68KL CM201212-R82KL CM201212-1R0KL Inductance uH 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Tolerance ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 % % % % % % % % % % % % % % % % % % % % % % % % % Q min. Test Frequency MHz SRF min. MHz RDC ohm max IDC mA max 10 10 12 12 15 15 15 15 15 15 15 15 8 8 10 10 10 10 10 10 10 10 10 10 8 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 3300 3300 3000 3000 2600 2500 2000 2000 1600 1500 1400 1100 800 600 600 600 500 300 200 150 150 100 100 80 80 0.20 0.23 0.25 0.27 0.29 0.32 0.37 0.38 0.42 0.45 0.52 0.60 0.78 0.99 1.47 1.61 1.84 1.95 2.16 2.35 2.57 2.65 2.99 3.35 3.82 540 535 520 480 465 455 395 390 385 360 340 330 285 275 230 195 170 165 160 150 145 140 130 125 120 TIGHTER TOLERANCE AVAILABLE ON REQUEST. CONSULT FACTORY. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 13 Chip Inductors - CM160808, CM100505 Series Laser-cut Winding Lead Free 0603 Size Part Number CM160808-1N5DL CM160808-1N8DL CM160808-2N2DL CM160808-2N7DL CM160808-3N3DL CM160808-3N9JL CM160808-4N7JL CM160808-5N6JL CM160808-6N8JL CM160808-8N2JL CM160808-10NJL CM160808-12NJL CM160808-15NJL CM160808-18NJL CM160808-22NJL CM160808-27NJL CM160808-33NJL CM160808-39NJL CM160808-47NJL CM160808-56NJL CM160808-68NJL CM160808-82NJL CM160808-R10JL Lead Free 0402 Size Part Number CM100505-1N0DL CM100505-1N2DL CM100505-1N5DL CM100505-1N8DL CM100505-2N2DL CM100505-2N7DL CM100505-3N3DL CM100505-3N9DL CM100505-4N7DL CM100505-5N6DL CM100505-6N8JL CM100505-8N2JL CM100505-10NJL CM100505-12NJL CM100505-15NJL CM100505-18NJL CM100505-22NJL CM100505-27NJL CM100505-33NJL CM100505-39NJL CM100505-47NJL 14 Inductance nH 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance ± ± ± ± ± 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % ±5 % Q min. Test Frequency MHz SRF min. MHz RDC ohm max IDC mA max 8 8 8 8 9 9 9 9 9 9 10 10 10 10 10 10 10 11 11 12 12 12 12 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 6000 6000 6000 6000 5500 5500 4800 4600 3550 3500 2800 2800 2500 2300 2000 2000 1800 1800 1800 1800 1500 1500 1300 0.07 0.08 0.09 0.10 0.12 0.15 0.17 0.18 0.20 0.28 0.32 0.35 0.41 0.45 0.50 0.55 0.60 0.80 0.95 1.2 1.3 1.5 1.8 500 500 500 500 500 450 450 430 430 400 400 400 350 350 300 300 300 300 250 250 250 250 200 Inductance nH Tolerance Q min. Test Frequency MHz SRF min. MHz RDC ohm max IDC mA max 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.00 12.00 15.00 18.00 22.00 27.00 33.00 39.00 47.00 ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 6000 6000 6000 6000 6000 5500 5500 5200 4800 4600 4000 3500 2800 2800 2500 2200 2000 1800 1800 1800 1800 0.05 0.06 0.07 0.08 0.09 0.10 0.12 0.15 0.17 0.19 0.30 0.35 0.41 0.45 0.60 0.70 0.80 1.2 1.4 1.7 2.1 400 400 400 400 400 400 400 360 360 340 320 320 320 320 240 240 200 200 170 150 140 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ 1008 size ■ ■ Available in E12 series ■ Mobil phones Cellular phones ■ CTV, VCR, HIC, FDD ■ High Q up to 80 typ. ■ High operating temperature of 125 °C ■ Lead free CW252016 Series - High Q Chip Inductors Electrical Specifications Bourns Part No. CW252016-10NK CW252016-12NK CW252016-15NK CW252016-18NK CW252016-22NK CW252016-27NK CW252016-33NK CW252016-39NK CW252016-47NK CW252016-56NJ CW252016-68NJ CW252016-82NJ CW252016-R10J CW252016-R12J CW252016-R15J CW252016-R18J CW252016-R22J CW252016-R27J CW252016-R33J CW252016-R39J CW252016-R47J CW252016-R56J CW252016-R68J CW252016-R82J CW252016-1R0J CW252016-1R2J CW252016-1R5J CW252016-1R8J CW252016-2R2J CW252016-2R7J CW252016-3R3J CW252016-3R9J CW252016-4R7J SRF min. RDC I rms nH Inductance Tol.% min. Q Test Freq. MHz L Q MHz ohms mA max. 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 50 50 40 50 55 55 60 60 60 60 60 60 60 50 45 45 45 45 45 45 45 45 45 45 25 25 25 25 25 22 22 20 18 100 100 100 100 100 100 100 100 100 100 100 100 100 25 25 25 25 25 25 25 25 25 25 25 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 500 500 350 350 350 350 350 350 350 350 350 350 350 100 100 100 100 100 100 100 100 100 100 100 50 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 4100 3300 2500 2500 2400 1600 1600 1500 1500 1300 1300 1000 1000 950 850 750 700 600 570 500 450 415 375 350 290 250 200 160 160 70 55 48 43 0.08 0.08 0.08 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.15 0.18 0.18 0.20 0.22 0.33 0.45 0.75 0.90 1.20 1.19 1.33 1.47 1.61 1.75 2.00 2.30 2.60 2.80 1.70 1.90 2.10 2.30 600 600 500 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 400 470 400 400 360 330 280 280 270 250 195 185 180 175 General Specifications Temperature Rise ...................40 ˚C max. at rated current Operating Temperature ..................................-40 °C to +125 °C Storage Temperature..-40 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Materials Core Material ..................Ceramic/Ferrite Wire ........Enamelled Copper (1W1E180) Terminal............................Mo/Mn+Ni+Au Packaging...................2,000 pcs per reel Product Dimensions Recommended Layout Packaging Specifications DIMENSIONS: 8.0 (.315) MM (INCHES) NOTE: 2 % TOLERANCE AVAILABLE FOR INDUCTANCE RANGES OF 33 NH AND UP. REPLACE “J” OR “K” WITH “G”. REV. 06/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. • Customers should verify actual device performance in their specific applications. 15 Features Applications ■ 0805 size ■ Mobil phones ■ Available in E12 series ■ Cellular phones ■ High Q up to 80 typ. ■ CTV, VCR, HIC, FDD ■ High operating temperature of 125 °C ■ Small size of only 2.0 mm ■ Lead Free CW201212 Series - High Q Chip Inductors Electrical Specifications Bourns Part No. CW201212-2N2J CW201212-2N7J CW201212-3N3J CW201212-3N9J CW201212-4N7J CW201212-5N6J CW201212-6N8J CW201212-8N2J CW201212-10NJ CW201212-12NJ CW201212-15NJ CW201212-18NJ CW201212-22NJ CW201212-27NJ CW201212-33NJ CW201212-39NJ CW201212-47NJ CW201212-56NJ CW201212-68NJ CW201212-82NJ CW201212-R10J CW201212-R12J CW201212-R15J CW201212-R18J CW201212-R22J CW201212-R27J CW201212-R33J CW201212-R39J CW201212-R47J CW201212-R56J CW201212-R68J CW201212-R82J CW201212-R91J Inductance Q Test Freq. MHz SRF min. RDC I rms nH Tol. % min. L Q MHz ohms mA max. 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 910 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 50 35 30 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 50 50 50 50 45 45 45 33 23 23 23 22 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 150 150 150 100 100 100 100 100 100 250 50 25 25 22 1000 1000 1500 1000 1000 1000 1000 1000 500 500 500 500 500 500 500 500 500 500 500 500 500 250 250 250 250 250 250 250 100 50 50 50 50 6000 6000 6000 6000 5800 5800 5800 5500 4800 4100 3600 3400 3300 2600 2400 2100 1700 1600 1450 1350 1200 1100 950 900 860 850 800 780 375 340 270 230 220 0.06 0.08 0.08 0.06 0.06 0.08 0.06 0.06 0.08 0.08 0.08 0.08 0.10 0.12 0.15 0.18 0.15 0.25 0.27 0.32 0.43 0.48 0.67 0.85 1.10 1.46 1.65 2.20 1.72 1.90 2.05 2.30 2.50 600 600 600 600 600 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 400 400 400 350 300 250 200 170 250 230 190 180 150 General Specifications Temperature Rise ...................40 ˚C max. at rated current Operating Temperature ..................................-40 °C to +125 °C Storage Temperature..-40 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Materials Core Material ........Alumina (1CC201211) Wire ........Enamelled Copper (1W1E180) Terminal............................Mo/Mn+Ni+Au Packaging..................2,000 pcs. per reel Product Dimensions Recommended Layout Packaging Specifications DIMENSIONS: MM (INCHES) 8.0 (.315) 16 REV. 05/05 NOTE: 2 % TOLERANCE AVAILABLE FOR INDUCTANCE RANGES OF 12 NH AND UP. REPLACE “J” WITH “G”. *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. • Customers should verify actual device performance in their specific applications. Features Applications ■ 0603 size ■ ■ Available in E12 series ■ Mobil phones Cellular phones ■ CTV, VCR, HIC, FDD ■ High Q up to 80 typ. ■ High operating temperature of 125 °C ■ Small size of only 1.6 mm ■ Lead free CW160808 Series - High Q Chip Inductors Electrical Specifications Bourns Part No. CW160808-1N8M CW160808-3N9K CW160808-4N7K CW160808-6N8J CW160808-8N2J CW160808-10NJ CW160808-12NJ CW160808-15NJ CW160808-18NJ CW160808-22NJ CW160808-27NJ CW160808-33NJ CW160808-39NJ CW160808-47NJ CW160808-56NJ CW160808-68NJ CW160808-82NJ CW160808-R10J CW160808-R12J CW160808-R15J CW160808-R18J CW160808-R22J CW160808-R27J Inductance Q Test Freq. MHz SRF min. RDC I rms nH Tol. % min. L Q MHz ohms mA max. 1.8 3.9 4.7 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 ±20 ±10 ±10 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 16 16 16 25 30 30 30 30 30 35 35 35 35 35 35 35 34 34 32 28 25 25 25 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 150 150 150 150 100 100 100 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 150 100 100 100 6000 6000 5800 5800 5000 4800 4000 4000 3100 3000 2800 2300 2200 2100 1900 1700 1700 1400 1350 1300 990 990 990 0.04 0.08 0.10 0.11 0.11 0.13 0.13 0.17 0.17 0.19 0.22 0.22 0.25 0.28 0.31 0.34 0.54 0.71 0.79 0.92 1.25 1.90 2.30 700 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 400 400 300 280 240 200 170 General Specifications Temperature Rise ...................20 ˚C max. at rated current Operating Temperature ..................................-40 °C to +125 °C Storage Temperature .................................-40 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Core Material ..............................Alumina (1CC150707-302291)) Wire ........Enamelled Copper (1W1E180) Terminal............................Mo/Mn+Ni+Au Encapsulate Epoxy (1EAS-UV300) Packaging...................3,000 pcs per reel Product Dimensions Packaging Specifications Recommended Layout 8.0 (.315) DIMENSIONS: REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 17 Features Applications ■ 0805 size ■ ■ Available in E12 Series ■ Mobil phones Cellular phones ■ CTV, VCR, HIC, FDD ■ Automotive electronics ■ High frequency ■ Nickel barrier ■ Lead free CE201210 Series - Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CE201210-1N5D CE201210-1N8D CE201210-2N2D CE201210-2N7D CE201210-3N3J CE201210-3N9J CE201210-4N7J CE201210-5N6J CE201210-6N8J CE201210-8N2J CE201210-10NJ CE201210-12NJ CE201210-15NJ CE201210-18NJ CE201210-22NJ CE201210-27NJ CE201210-33NJ CE201210-39NJ CE201210-47NJ CE201210-56NJ CE201210-68NJ CE201210-82NJ CE201210-R10J CE201210-R12J CE201210-R15J CE201210-R18J CE201210-R22J CE201210-R27J CE201210-R33J CE201210-R39J CE201210-R47J Inductance µH 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 Tol. % ± ± ± ± 0.3 nH 0.3 nH 0.3 nH 0.3 nH ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 Q typ. Test Freq. SRF MHz (@ 100 MHz) L MHz min. 21 18 18 19 16 18 18 20 20 21 20 21 22 24 23 23 24 23 23 23 25 24 23 22 22 23 20 20 22 17 17 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 4000 4000 4000 4000 4000 4000 3500 3200 2800 2400 2100 1900 1600 1500 1400 1300 1200 1000 900 800 700 600 600 500 500 400 350 300 250 250 200 DCR I rms mohm max. mA max. 100 100 100 100 130 150 200 230 250 280 300 350 400 450 500 550 600 650 700 750 800 900 900 950 1000 1100 1200 1300 1400 1300 1500 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 General Specifications Temperature Rise ...................30 ˚C max. at rated current Operating Temperature .-55 °C to +125 °C Storage Temperature..-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material .............................Ceramic Terminal.....................................Ag/Ni/Sn Packaging: 0.85 mm product height ................................4,000 pcs. per reel 1.25 mm product height ................................2,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Model CE201210-1N5D through CE201210-82NJ CE201210-R10J through CE201210-R47J Dimension A 0.85 (0.033) 1.25 (0.050) Recommended Layout Packaging Specifications 18 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CE201210 Series - Multi-Layer Chip Inductors Electrical Specifications REV. 06/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 19 Features Applications ■ 0805 size ■ Prevention of electromagnetic interference to signals on the secondary side of electronic equipment ■ Magnetic shielding ■ Height as low as 0.85 mm ■ Nickel barrier ■ Lead free CV201210 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CV201210-47NK CV201210-68NK CV201210-82NK CV201210-R10K CV201210-R12K CV201210-R15K CV201210-R18K CV201210-R22K CV201210-R27K CV201210-R33K CV201210-R39K CV201210-R47K CV201210-R56K CV201210-R68K CV201210-R82K CV201210-1R0K CV201210-1R2K CV201210-1R5K CV201210-1R8K CV201210-2R2K CV201210-2R7K CV201210-3R3K CV201210-3R9K CV201210-4R7K CV201210-5R6K CV201210-6R8K CV201210-8R2K CV201210-100K CV201210-120K CV201210-150K CV201210-180K CV201210-220K CV201210-270K CV201210-330K Inductance µH 0.047 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 Q Test Freq. SRF MHz DCR I rms Tol. % min. L,Q MHz min. mΩ max. mA max. ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 15 15 15 20 20 20 20 20 20 20 25 25 25 25 25 45 45 45 45 45 45 45 45 45 45 45 45 45 45 30 30 30 30 30 50* 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 0.4 320 280 255 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 41 38 35 32 29 26 24 22 19 18 16 14 13 200 200 200 300 300 400 400 500 500 550 650 650 750 800 1000 400 500 500 600 650 750 800 900 1000 900 1000 1100 1150 1250 800 900 1100 1150 1250 300 300 300 250 250 250 250 250 250 250 200 200 150 150 150 50 50 50 50 30 30 30 30 30 15 15 15 15 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 General Specifications Temperature Rise ...................30 ˚C max. at rated current Operating Temperature ..................................-55 °C to +125 °C Storage Temperature .................................-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material ................................Ferrite Terminal.....................................Ag/Ni/Sn Packaging: 0.85 mm product height ................................4,000 pcs. per reel 1.25 mm product height ................................2,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Model CV201210-47NK through CV201210-R39K CV201210-R47K through CV201210-R82K CV201210-1R0K through CV201210-2R2K CV201210-2R7K through CV201210-330K Dimension A 0.85 (0.033) 1.25 (0.050) 0.85 (0.033) 1.25 (0.050) *Test Frequency for L (inductance) of CV201210-47NK is 10 MHz. Packaging Specifications 20 Recommended Layout *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CV201210 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications REV. 06/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 21 Features Applications ■ 1206 size ■ Prevention of electromagnetic interference to signals on the secondary side of electronic equipment ■ Magnetic shielding ■ High Q characteristics ■ Nickel barrier ■ Lead free CS321613 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CS321613-47NK CS321613-68NK CS321613-R10K CS321613-R12K CS321613-R15K CS321613-R18K CS321613-R22K CS321613-R27K CS321613-R33K CS321613-R39K CS321613-R47K CS321613-R56K CS321613-R68K CS321613-R82K CS321613-1R0K CS321613-1R2K CS321613-1R5K CS321613-1R8K CS321613-2R2K CS321613-2R7K CS321613-3R3K CS321613-3R9K CS321613-4R7K CS321613-5R6K CS321613-6R8K CS321613-8R2K CS321613-100K CS321613-120K CS321613-150K CS321613-180K CS321613-220K CS321613-270K CS321613-330K Q Test Freq. DCR I rms µH Inductance Tol.% typ. L,Q MHz min. SRF MHz typ. mΩ max. mA max. 0.047 0.068 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 60 60 50 50 50 50 50 50 50 50 50 50 50 50 80 80 80 80 80 80 85 85 85 65 65 65 65 65 45 45 45 45 45 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 0.4 320 280 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 40 38 35 32 29 26 24 22 19 18 16 14 13 400 350 300 280 250 230 220 200 180 170 160 150 135 125 105 95 85 75 70 65 55 50 48 45 40 36 33 30 27 25 22 20 18 150 150 200 200 200 200 250 250 300 300 300 350 350 400 250 300 300 500 600 600 700 800 800 600 600 600 700 900 1100 1400 1400 1500 1500 300 300 250 250 250 250 250 250 250 200 200 150 150 150 100 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 General Specifications Temperature Rise ...................20 ˚C max. at rated current Operating Temperature ..................................-55 °C to +125 °C Storage Temperature .................................-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material ................................Ferrite Terminal.....................................Ag/Ni/Sn Packaging..................3,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout Packaging Specifications 22 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CS321613 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 23 Features Applications ■ 0805 size ■ Prevention of electro- magnetic interference to signals on the secondary side of electronic equipment ■ Magnetic shielding ■ High Q characteristics ■ Nickel barrier Model CS201210 is currently available, although not recommended for new designs. Use Model CV201210. ■ Lead free CS201212 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CS201212-47NK CS201212-56NK CS201212-68NK CS201212-82NK CS201212-R10K CS201212-R12K CS201212-R15K CS201212-R18K CS201212-R22K CS201212-R27K CS201212-R33K CS201212-R39K CS201212-R47K CS201212-R56K CS201212-R68K CS201212-R82K CS201212-1R0K CS201212-1R2K CS201212-1R5K CS201212-1R8K CS201212-2R2K CS201212-2R7K CS201212-3R3K CS201212-3R9K CS201212-4R7K CS201212-5R6K CS201212-6R8K CS201212-8R2K CS201212-100K CS201212-120K CS201212-150K CS201212-180K CS201212-220K CS201212-270K CS201212-330K Q Test Freq. DCR I rms µH Inductance Tol. % typ. L,Q MHz min. SRF MHz typ. mΩ max. mA max. 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 60 60 60 60 50 50 50 50 50 50 50 50 50 50 50 75 75 75 75 75 80 80 80 80 80 60 60 60 60 60 40 40 40 40 40 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 0.4 320 300 280 255 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 40 38 35 32 29 26 24 22 19 18 16 14 13 400 380 350 320 300 280 250 230 220 200 180 170 160 150 135 125 105 95 85 75 70 65 55 50 48 45 40 36 33 30 27 25 22 20 18 100 150 200 200 200 200 200 200 250 300 300 400 400 400 600 300 400 400 400 400 400 500 500 1000 1300 500 600 700 800 800 1400 1400 700 800 1000 300 300 300 300 250 250 250 250 250 250 150 200 200 150 150 150 100 100 100 100 50 50 50 50 50 50 25 25 25 25 15 15 5 5 5 General Specifications Temperature Rise ...................20 ˚C max. at rated current Operating Temperature ..................................-55 °C to +125 °C Storage Temperature .................................-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material ................................Ferrite Terminal.....................................Ag/Ni/Sn Packaging..................3,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout Packaging Specifications 24 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CS201212 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications REV. 07/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 25 Features Applications ■ 0603 size ■ Prevention of electromagnetic interference to signals on the secondary side of electronic equipment ■ Magnetic shielding ■ High Q characteristics ■ Nickel barrier ■ Lead free CS160808 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CS160808-47NK CS160808-68NK CS160808-82NK CS160808-R10K CS160808-R12K CS160808-R15K CS160808-R18K CS160808-R22K CS160808-R27K CS160808-R33K CS160808-R39K CS160808-R47K CS160808-R56K CS160808-R68K CS160808-R82K CS160808-1R0K CS160808-1R2K CS160808-1R5K CS160808-1R8K CS160808-2R2K CS160808-2R7K Q Test Freq. DCR I rms µH Inductance Tol. % typ. L,Q MHz min. typ. mΩ max. mA max. 0.047 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 45 45 45 30 30 30 30 30 30 30 30 30 30 30 30 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 260 250 245 240 205 180 165 150 136 125 110 105 95 80 75 70 60 55 50 45 40 320 290 280 270 260 250 220 200 190 180 170 160 150 140 130 95 80 70 70 60 55 150 200 250 250 300 350 400 400 500 550 600 700 900 900 1400 500 600 650 750 900 1000 200 200 200 200 200 200 200 200 200 150 150 150 150 150 100 100 100 50 50 50 50 Packaging Specifications SRF MHz General Specifications Temperature Rise ...................20 ˚C max. at rated current Operating Temperature ..................................-55 °C to +125 °C Storage Temperature .................................-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material ................................Ferrite Terminal.....................................Ag/Ni/Sn Packaging..................4,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout 26 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CS160808 Series - Ferrite Multi-Layer Chip Inductors Electrical Specifications REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 27 Features Applications ■ 0805 size ■ ■ Available in E12 Series ■ Mobil phones Cellular phones ■ CTV, VCR, HIC, FDD ■ Automotive electronics ■ High frequency ■ Nickel barrier Model CI201210 is currently available, although not recommended for new designs. Use Model CE201210. ■ Lead free CI201210 Series - Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CI201210-1N0D CI201210-1N2D CI201210-1N5D CI201210-1N8D CI201210-2N2D CI201210-2N7D CI201210-3N3D CI201210-3N9D CI201210-4N7D CI201210-5N6D CI201210-6N8J CI201210-8N2J CI201210-10NJ CI201210-12NJ CI201210-15NJ CI201210-18NJ CI201210-22NJ CI201210-27NJ CI201210-33NJ CI201210-39NJ CI201210-47NJ CI201210-56NJ CI201210-68NJ CI201210-82NJ CI201210-R10J CI201210-R12J CI201210-R15J CI201210-R18J CI201210-R22J CI201210-R27J CI201210-R33J CI201210-R39J CI201210-R47J Q Test Freq. DCR I rms nH Inductance Tol. % min. L,Q MHz min. SRF MHz typ. ohm max. mA max. 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 4000 4000 4000 4000 3800 3600 3400 3200 3000 2800 2600 2200 1800 1650 1350 1350 1100 1100 1000 900 850 750 400 600 500 450 400 350 330 300 270 220 180 12000 10000 10000 8000 8000 6000 6000 5400 4500 4000 3650 3000 2500 2450 2000 1750 1700 1550 1350 1300 1200 1150 1000 850 730 650 550 500 450 410 370 330 280 0.10 0.10 0.10 0.10 0.10 0.10 0.13 0.15 0.20 0.23 0.25 0.28 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.90 1.00 1.30 1.50 1.80 2.00 2.50 3.00 3.50 4.00 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 250 250 250 250 250 250 250 250 General Specifications Temperature Rise ...................20 ˚C max. at rated current Operating Temperature .-55 °C to +125 °C Storage Temperature..-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material .............................Ceramic Terminal.....................................Ag/Ni/Sn Packaging..................3,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout Packaging Specifications 28 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CI201210 Series - Multi-Layer Chip Inductors Electrical Specifications REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 29 Features Applications ■ 0603 size ■ ■ Available in E12 Series ■ Mobil phones Cellular phones ■ CTV, VCR, HIC, FDD ■ Automotive electronics ■ High frequency ■ Nickel barrier ■ Lead free CI160808 Series - Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CI160808-1N0D CI160808-1N2D CI160808-1N5D CI160808-1N8D CI160808-2N2D CI160808-2N7D CI160808-3N3D CI160808-3N9D CI160808-4N7D CI160808-5N6D CI160808-6N8J CI160808-8N2J CI160808-10NJ CI160808-12NJ CI160808-15NJ CI160808-18NJ CI160808-22NJ CI160808-27NJ CI160808-33NJ CI160808-39NJ CI160808-47NJ CI160808-56NJ CI160808-68NJ CI160808-82NJ CI160808-R10J CI160808-R12J CI160808-R15J CI160808-R18J CI160808-R22J CI160808-R27J Q Test Freq. DCR I rms nH Inductance Tol. % min. L,Q MHz min. SRF MHz typ. ohm max. mA max. 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 4000 4000 4000 3800 3600 3400 3200 3000 2800 2700 2600 2200 1800 1650 1350 1350 1100 1100 1000 900 800 750 700 600 500 500 500 400 350 300 13000 13000 10000 10000 10000 8000 6000 6000 5000 5000 4000 4000 3000 2700 2400 2050 1850 1750 1500 1350 1200 1150 1000 900 850 850 680 60 500 450 0.10 0.10 0.10 0.12 0.16 0.20 0.22 0.25 0.28 0.29 0.30 0.33 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.90 1.00 1.20 1.50 1.70 2.00 2.40 2.70 2.80 3.10 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 250 200 200 200 200 General Specifications Temperature Rise ...................20 ˚C max. at rated current Operating Temperature .-55 °C to +125 °C Storage Temperature..-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material .............................Ceramic Terminal.....................................Ag/Ni/Sn Packaging..................4,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout Packaging Specifications 30 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CI160808 Series - Multi-Layer Chip Inductors Electrical Specifications REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 31 Features Applications ■ 0402 size ■ ■ Available in E12 Series ■ Mobil phones Cellular phones ■ CTV, VCR, HIC, FDD ■ Automotive electronics ■ High frequency ■ Nickel barrier ■ Lead free CI100505 Series - Multi-Layer Chip Inductors Electrical Specifications Bourns Part No. CI100505-1N0D CI100505-1N2D CI100505-1N5D CI100505-1N8D CI100505-2N2D CI100505-2N7D CI100505-3N3D CI100505-3N9D CI100505-4N7D CI100505-5N6D CI100505-6N8J CI100505-8N2J CI100505-10NJ CI100505-12NJ CI100505-15NJ CI100505-18NJ CI100505-22NJ CI100505-27NJ CI100505-33NJ CI100505-39NJ CI100505-47NJ CI100505-56NJ CI100505-68NJ CI100505-82NJ CI100505-R10J DCR I rms nH Inductance Tol. % 100 Q min. MHz 800 1600 min. SRF MHz typ. ohm max. mA max. 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±0.3 nH ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 20 20 20 22 22 22 22 22 22 22 22 20 20 20 20 20 20 17 16 16 10 — — — — 26 26 30 35 35 35 35 30 30 28 28 28 24 24 20 15 13 — — — — — — — — 6000 6000 6000 6000 6000 6000 6000 4000 4000 4000 3900 3600 3200 2700 2300 2100 1900 1600 1300 1200 1000 750 700 600 550 13000 10000 10000 9500 9000 9000 8000 6500 5000 5000 4400 4000 3500 3500 3000 2600 2200 1900 1700 1600 1300 900 800 700 650 0.10 0.10 0.10 0.12 0.16 0.20 0.22 0.25 0.28 0.29 0.35 0.40 0.45 0.50 0.55 0.65 0.80 0.90 1.10 1.20 1.30 1.40 1.40 1.60 2.00 300 300 300 300 300 300 300 300 300 300 300 250 250 200 200 200 200 200 200 100 100 100 100 100 100 General Specifications Temperature Rise ...................20 ˚C max. at rated current Operating Temperature .-55 °C to +125 °C Storage Temperature..-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Materials Base Material .............................Ceramic Terminal.....................................Ag/Ni/Sn Packaging................10,000 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout Packaging Specifications 32 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CI100505 Series - Multi-Layer Chip Inductors Electrical Specifications REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 33 Features Applications ■ 1008 size ■ Prevention of electromagnetic interference to signals on the secondary side of electronic equipment ■ Magnetic shielding ■ High Q characteristics ■ High current ■ Lead free CF252016 Series - Ferrite Multi-Layer High Current Chip Inductors Electrical Specifications Bourns Part No. CF252016-R10K CF252016-R12K CF252016-R15K CF252016-R18K CF252016-R22K CF252016-R27K CF252016-R33K CF252016-R39K CF252016-R47K CF252016-R56K CF252016-R68K CF252016-R82K CF252016-1R0K CF252016-1R2K CF252016-1R5K CF252016-1R8K CF252016-2R2K CF252016-2R7K CF252016-3R3K CF252016-3R9K CF252016-4R7K CF252016-5R6K CF252016-6R8K CF252016-8R2K CF252016-100K CF252016-120K CF252016-150K CF252016-180K CF252016-220K CF252016-270K CF252016-330K Q Test Freq. SRF MHz DCR I rms µH Inductance Tol. % min. L,Q MHz min. Ω max. mA max. 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 25 25 25 25 25 25 25 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 680 650 530 520 390 330 310 290 260 230 220 180 150 140 130 120 105 90 80 75 70 60 55 50 30 27 23 22 21 19 17 0.21 0.22 0.25 0.29 0.30 0.33 0.39 0.40 0.44 0.49 0.52 0.61 0.75 0.87 1.00 1.10 1.30 1.40 1.60 1.70 1.90 2.20 2.40 2.60 2.20 2.50 2.80 3.20 3.60 4.30 4.70 570 550 500 460 430 420 400 375 350 330 320 290 250 240 230 220 210 200 190 185 180 170 165 160 155 150 140 130 125 115 110 General Specifications Temperature Rise ...................40 ˚C max. at rated current Operating Temperature ..................................-55 °C to +125 °C Storage Temperature..-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Materials Base Material ................................Ferrite Terminal ..........................Pd/Pt/Ag/Ni/Sn Packaging..................2,000 pcs. per reel Product Dimensions Recommended Layout Packaging Specifications DIMENSIONS: 34 MM (INCHES) REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ 1210 size ■ Prevention of electromagnetic interference to signals on the secondary side of electronic equipment ■ Magnetic shielding ■ High Q characteristics ■ High current ■ Lead free CF322513 Series - Ferrite Multi-Layer High Current Chip Inductors Electrical Specifications Bourns Part No. CF322513-R12K CF322513-R15K CF322513-R18K CF322513-R22K CF322513-R27K CF322513-R33K CF322513-R39K CF322513-R47K CF322513-R56K CF322513-R68K CF322513-R82K CF322513-1R0K CF322513-1R2K CF322513-1R5K CF322513-1R8K CF322513-2R2K CF322513-2R7K CF322513-3R3K CF322513-3R9K CF322513-4R7K CF322513-5R6K CF322513-6R8K CF322513-8R2K CF322513-100K CF322513-120K CF322513-150K CF322513-180K CF322513-220K CF322513-270K CF322513-330K Q Test Freq. SRF MHz DCR I rms µH Inductance Tol. % min. L,Q MHz min. Ω max. mA max. 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 500 450 400 350 320 300 250 220 180 160 140 120 100 85 80 75 70 60 55 50 47 43 40 36 33 30 27 25 20 17 0.22 0.25 0.28 0.32 0.36 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.85 0.90 1.00 1.10 1.20 1.30 1.50 1.60 1.80 2.00 2.10 2.50 2.80 3.30 3.70 5.00 5.60 450 450 450 450 450 450 450 450 450 450 450 400 390 370 350 320 290 260 250 220 200 180 170 150 140 130 120 110 80 70 General Specifications Temperature Rise ...................40 ˚C max. at rated current Operating Temperature ..................................-55 °C to +125 °C Storage Temperature..-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Materials Base Material ................................Ferrite Terminal ..........................Pd/Pt/Ag/Ni/Sn Packaging..................2,500 pcs. per reel Product Dimensions Recommended Layout Packaging Specifications DIMENSIONS: MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. REV. 05/05 35 Features Applications ■ 1812 size ■ Prevention of electromagnetic interference to signals on the secondary side of electronic equipment ■ Magnetic shielding ■ High Q characteristics ■ High current ■ Lead Free CF453215 Series - Ferrite Multi-Layer High Current Chip Inductors Electrical Specifications Bourns Part No. CF453215-R10K CF453215-R12K CF453215-R15K CF453215-R18K CF453215-R22K CF453215-R27K CF453215-R33K CF453215-R39K CF453215-R47K CF453215-R56K CF453215-R68K CF453215-R82K CF453215-1R0K CF453215-1R2K CF453215-1R5K CF453215-1R8K CF453215-2R2K CF453215-2R7K CF453215-3R3K CF453215-3R9K CF453215-4R7K CF453215-5R6K CF453215-6R8K CF453215-8R2K CF453215-100K CF453215-120K CF453215-150K CF453215-180K CF453215-220K CF453215-270K CF453215-330K Q Test Freq. SRF MHz DCR I rms µH Inductance Tol. % min. L,Q MHz min. Ω max. mA max. 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 35 35 35 35 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 300 280 250 220 200 180 165 150 145 140 135 130 100 80 70 60 55 50 45 40 35 33 27 25 20 18 17 15 13 12 11 0.18 0.20 0.22 0.24 0.25 0.26 0.28 0.30 0.32 0.36 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.50 2.80 3.20 3.60 4.00 800 770 730 700 665 635 605 575 545 520 500 475 450 430 410 390 380 370 355 330 315 300 285 270 250 225 200 190 180 170 160 General Specifications Temperature Rise ...................40 ˚C max. at rated current Operating Temperature ..................................-55 °C to +125 °C Storage Temperature..-55 °C to +125 °C Reflow Soldering ...230 °C, 50 sec. max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Materials Base Material ................................Ferrite Terminal ..........................Pd/Pt/Ag/Ni/Sn Packaging..................1,000 pcs. per reel Product Dimensions Recommended Layout Packaging Specifications DIMENSIONS: 36 MM (INCHES) REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Notes 37 II. Surface Mount Power Inductors Product Capability Matrix........................................................................................40 SDR Non-Shielded Series Product Selection Guide ............................................41 SRR Shielded Series Product Selection Guide ......................................................44 SRU Shielded Series Product Selection Guide......................................................46 Soldering Profile......................................................................................................46 Product Specifications • Model SDR0302 Non-Shielded Series Power Inductors ..................................47 • Model SDR0403 Non-Shielded Series Power Inductors ..................................49 • Model SDR0503 Non-Shielded Series Power Inductors ..................................51 • Model SDR0602 Non-Shielded Series Power Inductors ..................................53 • Model SDR0603 Non-Shielded Series Power Inductors ..................................55 • Model SDR0604 Non-Shielded Series Power Inductors ..................................57 • Model SDR0703 Non-Shielded Series Power Inductors ..................................59 • Model SDR0805 Non-Shielded Series Power Inductors ..................................61 • Model SDR0906 Non-Shielded Series Power Inductors ..................................63 • Model SDR1005 Non-Shielded Series Power Inductors ..................................65 • Model SDR1006 Non-Shielded Series Power Inductors ..................................67 • Model SDR1030 Non-Shielded Series Power Inductors ..................................69 • Model SDR1045 Non-Shielded Series Power Inductors ..................................71 • Model SDR1105 Non-Shielded Series Power Inductors ..................................73 • Model SDR1305 Non-Shielded Series Power Inductors ..................................74 • Model SDR1307 Non-Shielded Series Power Inductors ..................................76 • Model SDR1806 Non-Shielded Series Power Inductors ..................................78 • Model SDR2207 Non-Shielded Series Power Inductors ..................................80 • Model SDR7030 Non-Shielded Series Power Inductors ..................................82 • Model SDR7045 Non-Shielded Series Power Inductors ..................................84 38 • • • • • • • • • • • • • • • • • • • • • Model SRR0603 Shielded Series Power Inductors ..........................................86 Model SRR0604 Shielded Series Power Inductors ..........................................88 Model SRR0618 Shielded Series Power Inductors ..........................................90 Model SRR0804 Shielded Series Power Inductors ..........................................92 Model SRR0805 Shielded Series Power Inductors ..........................................94 Model SRR0906 Shielded Series Power Inductors ..........................................96 Model SRR0908 Shielded Series Power Inductors ..........................................98 Model SRR1003 Shielded Series Power Inductors ........................................100 Model SRR1005 Shielded Series Power Inductors ........................................102 Model SRR1205 Shielded Series Power Inductors ........................................104 Model SRR1206 Shielded Series Power Inductors ........................................106 Model SRR1208 Shielded Series Power Inductors ........................................108 Model SRR1240 Shielded Series Power Inductors ........................................110 Model SRR1260 Shielded Series Power Inductors ........................................112 Model SRR1305 Shielded Series Power Inductors ........................................114 Model SRR1806 Shielded Series Power Inductors ........................................116 Model SRR3011 Shielded Series Power Inductors ........................................118 Model SRR4011 Shielded Series Power Inductors ........................................120 Model SRR6603 Shielded Series Power Inductors ........................................122 Model SRR7032 Shielded Series Power Inductors ........................................124 Model SRR7045 Shielded Series Power Inductors ........................................126 • • • • • • • • • • • • Model SRU1028 Shielded Series Power Inductors Model SRU1038 Shielded Series Power Inductors Model SRU1048 Shielded Series Power Inductors Model SRU3011 Shielded Series Power Inductors Model SRU3017 Shielded Series Power Inductors Model SRU3028 Shielded Series Power Inductors Model SRU5011 Shielded Series Power Inductors Model SRU5016 Shielded Series Power Inductors Model SRU5018 Shielded Series Power Inductors Model SRU5028 Shielded Series Power Inductors Model SRU8028 Shielded Series Power Inductors Model SRU8043 Shielded Series Power Inductors ........................................128 ........................................130 ........................................132 ........................................134 ........................................136 ........................................138 ........................................140 ........................................142 ........................................144 ........................................146 ........................................148 ........................................150 39 Surface Mount Power Inductors Capability Matrix Construction Model Series SDR0302 SDR0403 SDR0503 SDR0602 SDR0603 SDR0604 SDR0703 SDR0805 SDR0906 SDR1005 SDR1006 SDR1030 SDR1045 SDR1105 SDR1305 SDR1307 SDR1806 SDR2207 SDR7030 SDR7045 SRR0603 SRR0604 SRR0618 SRR0804 SRR0805 SRR0906 SRR0908 SRR1003 SRR1005 SRR1205 SRR1206 SRR1208 SRR1240 SRR1260 SRR1305 SRR1806 SRR3011 SRR4011 SRR6603 SRR7032 SRR7045 SRU1028 SRU1038 SRU1048 SRU3011 SRU3017 SRU3028 SRU5011 SRU5016 SRU5018 SRU5028 SRU8028 SRU8043 40 Shielded • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Product Size (mm) Non-Shielded Length Height • • • • • • • • • • • • • • • • • • • • 3.0 4.5 5.0 5.8 5.6 5.6 6.5 7.5 9.5 12.7 10.5 10.0 10.0 11.0 12.7 13.0 18.3 22.0 7.0 7.0 6.5 6.5 6.3 10.5 10.5 10.5 10.5 12.7 12.7 12.7 12.7 12.7 12.5 12.5 12.5 18.3 3.8 4.8 6.6 7.0 7.0 10.0 10.0 10.0 3.5 3.5 3.5 5.2 5.2 5.2 5.2 8.0 8.0 2.5 3.2 4.5 2.2 3.7 4.5 2.7 5.0 5.5 5.0 6.0 3.0 4.5 4.8 4.8 7.3 6.6 7.0 3.0 4.5 3.3 4.8 1.9 3.8 4.5 6.0 7.5 2.7 4.9 5.0 6.0 8.0 4.0 6.0 5.0 6.8 1.15 1.15 3.0 3.2 4.5 2.8 3.8 4.8 1.1 1.8 2.8 1.1 1.6 1.8 2.8 2.8 4.3 Product Range Minimum and Maximum Values SDR0302-1R0ML (1.0 uH) to SDR0302-122KL (1200 uH) SDR0403-1R0M (1.0uH) to SDR0403-271K (270uH) SDR0503-100M (10uH) to SDR0503-153J (15mH) SDR0602-2R7M (2.7uH) to SDR0602-561K (560uH) SDR0603-1R5M (1.5uH) to SDR0603-471K (470uH) SDR0604-1R2M (1.2uH) to SDR0604-821K (820uH) SDR0703-1R0M (1.0uH) to SDR0703-102K (1000uH) SDR0805-1R5M (1.5uH) to SDR0805-472K (4.7mH) SDR0906-2R2M (2.2uH) to SDR0906-103K (10mH) SDR1005-1R0M (1.0uH) to SDR1005-103K (10mH) SDR1006-1R5M (1.5uH) to SDR1006-472K (4700uH) SDR1030-2R7M (2.7 uH) to SDR1030-102K (1000 uH) SDR1045-2R7M (2.7 uH) to SDR1045-102K (1000 uH) SDR1105-100M (10uH) to SDR1105-201K (200uH) SDR1305-2R5Y (2.5 uH) to SDR1305-102K (1000 uH) SDR1307-1R5M (1.5uH) to SDR1307-102K (1000uH) SDR1806-1R0M (1.0uH) to SDR1806-102K (1000uH) SDR2207-R80M (0.8uH) to SDR2207-102K (1000uH) SDR7030-1R0M (1.0 uH) to SDR7030-102K (1000 uH) SDR7045-1R2M (1.2 uH) to SDR7045-102K (1000 uH) SRR0603-1R5M (1.5uH) to SRR0603-102K (1000uH) SRR0604-1R5M (1.5uH) to SRR0604-102K (1000uH) SRR0618-2R2M (2.2uH) to SRR0618-101M (100uH) SRR0804-5R0M (5.0uH) to SRR0804-471K (470uH) SRR0805-2R2M (2.2uH) to SRR0805-102K (1000uH) SRR0906-2R7M (2.7uH) to SRR0906-103Y (10mH) SRR0908-1R5M (10uH) to SRR0908-153Y (15mH) SRR1003-1R5M (1.5uH) to SRR1003-471Y (470uH) SRR1005-1R0M (1.0uH) to SRR1005-332K (3.3mH) SRR1205-2R5M (2.5uH) to SRR1205-821K (820uH) SRR1206-2R5M (2.5uH) to SRR1206-152K (1.5mH) SRR1208-2R5M (2.5uH) to SRR1208-152K (1.5mH) SRR1240-1R5Y (1.5 uH) to SRR1240-101M (100 uH) SRR1260-1R2Y (1.2 uH) to SRR1260-101M (100 uH) SRR1305-R90Z (0.9uH) to SRR1305-2R7Z (2.7uH) SRR1806-100M (10uH) to SRR1806-102M (1000uH) SRR3011-1R5YL (1.5 uH) to SRR3011-101YL (100 uH) SRR4011-R47YL (0.47 uH) to SRR4011-151YL (150 uH) SRR6603-1R0M (1.0uH) to SRR6603-103M (10000uH) SRR7032-3R3M (3.3 uH) to SRR7032-102M (1000 uH) SRR7045-100M (10 uH) to SRR7045-102M (1000 uH) SRR1028-1R0Y (1.0 uH) to SRR1028-151Y (150 uH) SRR1038-1R5Y (1.5 uH) to SRR1038-331Y (330 uH) SRR1048-R80Y (0.8 uH) to SRR1048-331Y (330 uH) SRU3011-1R5Y (1.5 uH) to SRU3011-100Y (10 uH) SRU3017-2R2Y (2.2 uH) to SRU3017-470Y (47 uH) SRR3028-100Y (10 uH) to SRR3028-101Y (100 uH) SRU5011-1R5Y (1.5 uH) to SRU5011-101Y (100 uH) SRU5016-1R8Y (1.8 uH) to SRU5016-101Y (100 uH) SRU5018-1R0Y (1.0 uH) to SRU5018-101Y (100 uH) SRU5028-1R2Y (1.2 uH) to SRU5028-101Y (100 uH) SRU8028-2R5Y (2.5 uH) to SRU8028-101Y (100 uH) SRU8043-2R2Y (2.2 uH) to SRU8043-101Y (100 uH) Current Range Min. and Max. Values 0.06A - 2.10A 0.20A - 3.8A 0.03A - 1.6A 0.12A - 1.5A 0.15A - 3.0A 0.20A - 7.3A 0.08A - 2.2A 0.15A - 9.1A 0.10A - 6.7A 0.11A - 9.0A 0.10A - 6.4A 0.20A - 3.00A 0.38A - 4.80A 0.24A - 10A 0.46A - 7.20A 0.65A - 9.5A 0.5A - 10A 3.0A - 35A 0.15A - 3.00A 0.22A - 3.80A 0.10A - 2.2A 0.15A - 3.9A 0.23A - 1.70A 0.28A - 2.8A 0.24A - 4.9A 0.07A - 3.2A 0.12A - 10A 0.45A - 8.0A 0.17A - 8.0A 0.57A - 10A 0.42A - 10A 0.55A - 10A 1.25A - 9.20A 1.70A - 9.20A 12.0A - 20A 0.45A - 4A 0.18A - 1.60A 0.25A - 3.20A 0.02A - 3.0A 0.15A - 2.40A 0.25A - 2.00A 0.70A - 7.00A 0.55A - 7.20A 0.65A - 7.80A 0.40A - 1.10A 0.21A - 0.98A 0.19A - 0.72A 0.20A - 1.80A 0.30A - 1.75A 0.32A - 2.80A 0.47A - 3.50A 0.75A - 4.50A 1.00A - 5.40A Specifications are subject to change without notice. SDR Series Non-Shielded Power Inductors Selection Guide Ind uH Shape Size mm Term. 0.56 0.8 1 1.2 1.4 1.5 1.8 2.2 2.5 2.7 3.3 3.9 4.7 5.0 5.6 6.8 7.5 8.2 10 12 15 18 22 27 33 36 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5000 5600 6800 8200 10000 12000 15000 SDR0302 round 3.0 x 2.5 A / mΩ SDR0403 round 4.5 x 3.2 A / mΩ 2.10 / 60.0 2.00 / 70.0 3.80 / 33.0 Current Irms and DCR, Lead Free Power Inductors Non-Shielded SDR0503 SDR0603 SDR0604 SDR0805 SDR1006 round round round round round 5.0 x 3.0 5.8 x 3.9 5.8 x 4.8 7.8 x 5.3 9.8 x 5.8 A / mΩ A / mΩ A / mΩ A / mΩ A / mΩ SDR1307 round 13 x 7.0 A / mΩ SDR0602 square 5.8x5.0x2.2 A / mΩ SDR7030 square 7.0 x 3.0 A / mΩ 3.00 / 22.0 4.20 / 20.0 3.30 / 38.0 1.90 / 75.0 1.80 / 80.0 1.65 / 90.0 3.00 / 40.0 2.91 / 42.0 2.60 / 47.0 3.60 / 30.0 2.80 / 60.0 2.35 / 50.0 1.50 1.40 1.30 1.20 / / / / 100 110 120 150 2.43 / 2.15 / 1.98 / 1.70 / 52.0 58.0 76.0 94.0 1.10 / 160 1.00 / 180 1.60 / 101 1.41 / 117 0.90 0.80 0.75 0.65 0.58 0.52 0.48 0.42 1.26 1.15 1.05 0.92 0.84 0.76 0.71 0.64 / / / / / / / / 200 250 280 400 460 600 750 850 0.38 / 1120 0.36 / 1270 0.34 / 1450 0.30 / 1850 0.28 / 2100 0.26 / 2850 0.22 / 3200 0.20 / 4600 0.18 / 5000 0.17 8 5700 0.15 / 8600 0.13/10000 0.12/10800 0.11/14300 0.10/16000 0.09/18000 0.08/22500 0.07/26000 0.06/30000 / / / / / / / / 132 182 210 235 338 378 522 540 0.59 / 587 0.54 / 844 0.50 / 937 0.46 / 1117 0.42 / 1270 0.35 / 1900 0.32 / 2200 0.26 / 3400 0.24 / 3900 0.22 / 4400 0.20 / 5000 0.17 / 6000 0.15 / 6400 0.13 / 7000 0.12 / 7800 0.11 / 8600 0.10/12000 0.09/14000 6.00 / 20.0 / / / / / / / 130 160 190 210 280 320 380 0.65 / 420 0.60 / 600 0.50 / 710 0.45 / 760 0.42 / 880 0.40 / 1600 0.37 / 1700 0.33 / 2000 0.30 / 2300 0.25 / 2500 0.23 / 2900 0.21 / 3300 0.19 / 3700 0.18 / 4700 0.16 / 5700 0.14 / 7500 0.12/10000 0.11/11500 0.063/12000 0.059/13000 0.055/15000 0.053/22000 0.050/26000 0.045/38000 0.042/40000 0.040/48000 9.50 / 5.0 5.40 / 21.0 9.00 / 6.0 4.50 / 25.0 4.40 / 28.0 3.70 / 30.0 5.00 / 24.0 4.60 / 27.0 4.00 / 36.0 1.38 / 110 1.29 / 120 1.70 / 85.0 1.60 / 90.0 1.50 / 95.0 3.50 / 35.0 3.20 / 40.0 2.80 / 50.0 1.14 1.02 0.93 0.82 0.75 0.67 0.61 1.45 1.40 1.30 1.25 1.10 1.00 0.88 2.30 / 70.0 2.00 / 80.0 1.80 / 90.0 1.60 / 100 1.50 / 110 1.30 / 120 1.20 / 140 / / / / / / / 50.0 55.0 70.0 75.0 150 160 180 250 280 300 450 0.56 / 460 0.52 / 550 0.48 / 660 0.44 / 720 0.40 / 840 0.38 / 950 0.36 / 100 0.32 / 1430 0.30 / 1600 0.26 / 2000 0.24 / 2400 0.20 / 3200 0.18 / 3400 0.15 / 4550 2.75 / 27.0 1.50 / 120 2.60 / 30.0 5.00 / 22.0 65.0 70.0 75.0 80.0 2.20 / 2.10 / 1.80 / 1.60 / 1.30 1.20 1.05 0.95 0.90 0.80 0.70 6.40 / 18.0 2.30 / 2.00 / 1.90 / 1.80 / / / / / / / / 100 120 140 150 190 220 250 0.80 / 320 0.72 / 370 0.68 / 420 0.62 / 520 0.58 / 600 0.52 / 700 0.48 / 930 0.40 / 1100 0.38 / 1380 0.35 / 1570 0.32 / 1880 0.27 / 2250 0.25 / 2480 0.21 / 3300 0.18 / 4000 0.16 / 4650 0.14 / 5200 1.10 / 160 1.00 / 200 0.94 / 240 0.85 / 300 0.78 / 370 0.72 / 450 0.66 / 480 0.58 / 680 0.51 / 770 0.49 / 960 0.42 / 1110 0.40 / 1260 0.36 / 11770 0.34 / 1960 0.30 / 2500 0.28 / 2800 0.23 / 4000 0.21 / 4500 0.17 / 6800 0.15 / 8000 0.14 / 9200 0.13/10000 0.12/11800 0.10/16500 0.09/18000 0.08/21000 8.20 / 8.0 7.50 / 8.7 2.20 / 38.0 7.00 / 10.0 1.40 / 130 1.30 / 150 1.85 / 48.0 3.80 / 40.0 3.40 / 44.0 6.50 / 15.0 6.00 / 17.0 1.20 / 170 1.15 / 180 1.65 / 58.0 3.00 / 48.0 2.60 / 60.0 2.45 / 70.0 2.25 / 80.0 2.15 / 90.0 1.95 / 100 1.75 / 110 1.50 / 120 5.80 / 5.60 / 4.80 / 4.50 / 4.20 / 3.60 / 3.30 / 3.10 / 1.10 1.00 0.90 0.80 0.75 0.70 0.65 0.60 19.0 21.0 30.0 34.0 36.0 47.0 60.0 65.0 1.35 / 140 2.90 / 75.0 1.25 / 170 2.70 / 82.0 1.15 / 190 2.50 / 95.0 1.10 / 220 2.30 / 120 1.00 / 250 2.10 / 140 0.97 / 350 1.90 / 180 0.89 / 400 1.80 / 210 0.78 / 470 1.60 / 250 0.72 / 630 1.50 / 280 0.66 / 730 1.30 / 360 0.57 / 970 1.20 / 440 0.52 / 1150 1.10 / 520 0.48 / 1300 1.00 / 600 0.42 / 1480 0.90 / 720 0.33 / 1900 0.85 / 880 0.28 / 2250 0.80 / 1000 0.24 / 2550 0.75 / 1300 0.23 / 3100 0.65 / 1600 0.21 / 4200 0.19 / 5000 0.17 / 6800 0.16 / 7600 0.14/11600 0.12/13500 0.11/14800 0.10/18000 / / / / / / / / 200 240 260 280 300 400 450 500 0.55 / 650 0.50 / 680 0.45 / 780 0.40 / 850 0.35 / 1300 0.32 / 1520 0.30 / 1650 0.26 / 2000 0.23 / 2300 0.20 / 2500 0.18 / 2850 0.16 / 3800 0.15 / 4200 0.14 / 5000 0.12 / 6200 1.50 / 75.0 1.20 / 115 1.00 / 160 0.85 / 230 0.70 / 340 0.58 / 480 0.46 / 720 0.40 / 920 0.32 / 1600 0.26 / 2200 0.22 / 2800 0.18 / 4350 0.15 / 6200 0.038/72000 0.034/80000 0.030/92000 0.027/110Ω 0.025/148Ω 0.020/168Ω Specifications are subject to change without notice. 41 SDR Series Non-Shielded Power Inductors Selection Guide Ind uH Shape Size mm Term. 0.56 0.8 1 1.2 1.4 1.5 1.8 2.2 2.5 2.7 3.3 3.9 4.7 5.0 5.6 6.8 7.5 8.2 10 12 15 18 22 27 33 36 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5000 5600 6800 8200 10000 12000 15000 42 SDR7045 square 7.0 x 4.5 A / mΩ SDR0906 square 12.5 x 6.3 A / mΩ Current Irms and DCR, Lead Free Power Inductors Non-Shielded SDR1030 SDR1045 SDR1105 SDR1305 SDR0703 square square square square oval 10.0 x 3.0 10.0 x 4.5 11 x 4.8 12.7 x 4.8 6.5x4.5x2.7 A / mΩ A / mΩ A / mΩ A / mΩ A / mΩ SDR1005 oval 12.7x10x5 A / mΩ SDR1806 oval 18.3x14x6.6 A / mΩ 7.50 / 7.0 10.00 / 4.0 SDR2207 oval 22x15x7 A / mΩ 16.0 / 2.8 2.20 / 42.0 2.00 / 47.0 3.80 / 22.0 3.50 / 27.0 3.30 / 32.0 15.0 / 3.8 6.50 / 9.0 1.90 / 52.0 1.80 / 60.0 4.00 / 30.0 13.0 / 4.5 9.00 / 6.8 5.50 / 12.0 3.50 / 40.0 3.00 / 28.0 4.80 / 26.0 7.20 / 9.8 6.0 / 10.5 2.60 / 42.0 3.30 / 45.0 3.00 / 50.0 2.60 / 40.0 4.20 / 33.0 5.20 / 16.5 1.70 / 65.0 1.65 / 75.0 1.58 / 80.0 1.50 / 100 2.25 / 54.0 2.80 / 60.0 2.60 / 65.0 2.20 / 52.0 3.50 / 40.0 4.30 / 24.0 1.40 / 105 1.30 / 115 2.80 / 36.0 2.00 / 70.0 1.60 / 86.0 1.40 / 125 1.22 / 150 1.00 / 230 0.90 / 280 0.75 / 430 0.62 / 580 0.50 / 930 0.42 / 1240 0.34 / 1850 0.30 / 2400 0.22 / 4000 2.40 / 70.0 2.10 / 90.0 2.00 / 100 1.90 / 110 1.80 / 120 1.60 / 130 1.40 / 150 1.25 / 180 1.15 / 190 1.10 / 230 1.05 / 260 1.00 / 310 0.95 / 330 0.90 / 390 0.85 / 430 0.75 / 560 0.70 / 640 0.60 / 850 0.55 / 1000 0.50 / 1270 0.45 / 1400 0.40 / 1630 0.32 / 2100 0.28 / 2400 0.24 / 2750 0.22 / 3500 0.20 / 4000 0.18 / 5000 0.17 / 5800 0.14 / 9000 0.13 / 9000 0.12/10000 0.1/13500 0.09/15000 0.07/20000 0.06/23000 0.05/28000 0.04/33000 2.00 / 64.0 3.20 / 50.0 1.38 / 145 2.20 / 88.0 1.10 / 220 1.90 / 110 0.96 / 270 1.60 / 165 0.82 / 360 1.30 / 225 0.70 / 540 1.10 / 300 2.40 2.20 2.00 1.80 1.60 1.50 0.60 / 700 0.85 / 500 1.20 / 500 0.46 / 1150 0.72 / 680 1.00 / 650 0.23 / 3300 0.43 / 1920 0.20 / 4700 0.38 / 2700 150 170 180 240 280 300 400 450 0.50 / 550 0.40 / 720 0.39 / 800 1.65 / 165 0.38 / 900 0.33 / 1118 1.40 / 255 0.27 / 1560 0.26 / 1750 1.20 / 380 0.25 / 2000 0.19 / 2700 1.00 / 500 0.18 / 3000 0.17 / 3600 0.85 / 700 0.16 / 4800 0.14 / 6200 0.67 / 1150 0.13 / 7000 0.11 / 9200 0.60 / 1400 0.10/10500 0.09/12000 0.46 / 2350 0.08/14200 2.50 / 68.0 0.28 / 2250 0.52 / 1280 / / / / / / / / 3.60 / 37.0 1.65 / 100 0.38 / 1700 0.62 / 950 1.10 1.00 0.90 0.75 0.70 0.65 0.60 0.56 4.00 / 45.0 3.80 / 48.0 3.50 / 52.0 3.30 / 70.0 3.00 / 80.0 2.80 / 90.0 2.60 / 100 / / / / / / 140 170 200 210 300 320 3.30 / 46.0 2.90 / 62.0 2.50 / 85.0 1.90 / 130 5.00 / 15.0 7.60 / 9.8 4.50 / 19.0 10.0 / 7.0 9.00 / 7.8 8.50 / 8.8 6.40 / 15.0 3.40 / 30.0 2.90 / 50.0 5.30 / 25.0 2.50 / 60.0 4.30 / 35.0 2.00 / 100 3.60 / 45.0 1.80 / 120 3.00 / 68.0 1.40 / 190 2.50 / 95.0 1.20 / 240 2.10 / 130 1.00 / 330 1.70 / 190 0.80 / 590 1.40 / 270 0.70 / 780 1.10 / 420 0.55 / 1550 1.00 / 580 0.45 / 1700 0.80 / 820 0.35 / 2600 0.70 / 1200 0.30 / 3900 0.50 / 1800 7.80 / 13.4 7.50 / 14.2 7.00 / 6.50 / 5.50 / 5.00 / 4.60 / 4.00 / 3.80 / 3.40 / 15.5 17.2 23.6 28.8 33.0 39.4 43.5 58.4 3.20 / 65.0 2.80 / 91.2 2.60 / 96.5 2.40 / 112 2.30 / 144 2.20 / 168 1.60 / 230 1.50 / 250 1.30 / 300 1.20 / 380 1.10 / 470 1.00 / 560 0.90 / 680 0.80 / 850 0.75 / 1000 0.70 / 1100 0.60 / 1400 0.55 / 1800 0.25 / 6300 0.20 / 8200 0.16/1400 0.15/17000 0.11/30000 0.11/34000 0.10/39000 Specifications are subject to change without notice. SRR Series Shielded Power Inductors Selection Guide Ind uH Shape mm Term 0.47 0.8 1 1.2 1.4 1.5 1.8 2.2 2.5 2.7 3.0 3.3 3.5 3.9 4.5 4.7 5.0 5.6 6.5 6.8 7.0 7.5 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 SRR3011 square 3.8 x 1.16 A / mΩ SRR3018 square 3.8 x 1.65 A / mΩ Current Irms and DCR, Lead Free Power Inductors Shielded SRR4011 SRR4018 SRR4028 SRR0510 SRR5028 square square square square square 4.8 x 1.15 4.8 x 2.0 4.8 x 3.0 5.2 x 1.05 5.8 x 3.0 A / mΩ A / mΩ A / mΩ A / mΩ A / mΩ 3.20 / 30.0 SRR0618 square 6.3 x 1.5 A / mΩ SRR0603 square 6.5 x 3.3 A / mΩ SRR6022 square 6.8 x 2.5 A / mΩ 4.60 / 14.0 2.50 / 48.0 1.30 / 55.0 1.75 / 34.0 2.60 / 35.0 2.56 / 20.0 2.20 / 58.0 2.20 / 25.0 2.05 / 28.0 2.10 / 56.0 1.80 / 75.0 1.00 / 85.0 0.76 / 180 1.45 / 45.0 1.70 / 50.0 2.20 / 32.0 4.00 / 18.0 2.00 / 40.0 3.20 / 24.0 2.70 / 30.0 1.95 / 60.0 1.80 / 30.0 2.60 / 32.0 2.50 / 30.0 0.85 / 90.0 1.40 / 110 1.80 / 65.0 1.65 / 35.0 1.65 / 75.0 1.50 / 60.0 0.69 / 220 1.40 / 70.0 1.80 / 55.0 1.38 / 65.0 2.20 / 40.0 2.20 / 35.0 0.75 / 125 1.20 /85.0 1.20 / 165 1.50 / 82.0 1.30 / 70.0 1.25 / 90.0 1.20 / 85.0 1.15 / 100 1.15 / 90.0 1.10 / 135 1.00 / 150 0.90 / 170 0.82 / 220 0.75 / 280 0.65 / 300 0.60 / 370 0.50 / 420 0.48 / 540 0.45 / 600 0.40/ / 820 0.38 / 860 0.32 / 1200 0.30 / 1350 1.05 / 100 1.00 / /100 0.85 / 125 0.78 / 150 0.75 / 160 0.72 / 185 0.60 / 200 0.58 / 230 0.50 / 250 0.48 / 280 0.42 / 320 0.36 / 400 0.32 / 520 0.30 / 600 0.28 / 700 0.26 / 860 0.23 / 1000 0.20 / 1250 0.18 / 1500 0.17 / 1700 0.16 / 2200 0.155/2600 0.15 / 3000 0.61 / 280 1.05 / 100 1.60 / 70.0 2.00 / 45.0 1.90 / 40.0 1.80 / 45.0 1.00 / 195 0.62 / 210 0.85 / 125 0.52 / 380 1.70 / 54.0 0.95 / 150 1.20 / 100 15.0 / 60.0 0.50 / 280 0.74 / 165 0.92 / 215 0.83 / 240 0.38 / 420 0.62 / 230 0.70 / 400 0.32 / 680 0.51 / 360 0.57 / 580 0.27 / 860 0.42 / 545 0.47 / 860 0.23 / 1800 0.39 / 800 0.40 / 1250 0.18 / 2250 0.32 / 1200 0.15 / 3600 0.25 / 2050 0.32 / 1800 0.30 / 2200 0.27 / 2400 0.22 / 3800 Specifications are subject to change without notice. 0.41 / 610 0.35 / 820 0.31 / 1100 0.23 / 1880 0.21 / 2340 1.60 / 55.0 1.40 / 70.0 1.25 / 80.0 1.15 / 100 1.10 / 110 1.00 / 120 0.90 / 160 0.78 / 190 0.72 / 210 0.65 / 250 0.60 / 300 0.56 / 350 0.50 / 430 0.45 / 480 0.82 / 220 1.10 / 120 0.60 / 310 0.90 / 180 0.47 / 460 0.70 / 270 0.43 / 680 0.60 / 430 0.36 / 1100 0.50 / 550 0.30 / 1500 0.40 / 900 0.23 / 2300 0.30 / 1500 0.35 / 900 0.25 / 1900 0.30 / 1250 0.20 / 2700 0.20 / 2000 0.18 / 4200 0.15 / 6700 0.14 / 4300 0.12 / 9500 0.10 / 14000 1.30 / 70.0 1.10 / 80.0 1.05 / 95.0 1.00 / 100 0.95 / 120 0.85 / 150 0.78 / 200 0.70 / 250 0.62 / 280 0.56 / 320 0.50 / 360 0.45 / 420 0.40 / 780 0.36 / 600 0.32 / 720 0.28 / 860 0.25 / 1100 0.22 / 1300 0.20 / 1500 0.18 / 1800 0.17 / 2200 0.16 / 2700 0.15 / 3500 0.14 / 4000 0.13 / 5000 43 SRR Series Shielded Power Inductors Selection Guide Ind uH Shape mm Term 0.47 0.8 1 1.2 1.4 1.5 1.8 2.2 2.5 2.7 3.0 3.3 3.5 3.9 4.5 4.7 5.0 5.6 6.5 6.8 7.0 7.5 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 44 SRR0603 square 6.5 x 3.3 A / mΩ SRR0604 square 6.5 x 4.8 A / mΩ Current Irms and DCR, Lead Free Power Inductors Shielded SRR7032 SRR7040 SRR7045 SRR0906 SRR0908 square square square square square 7 x 3.2 7.3 x 4.0 7 x 4.5 12.5 x 6.0 12.5 x 7.5 A / mΩ A / mΩ A / mΩ A / mΩ A / mΩ SRR1240 square 12.5 x 4.0 A / mΩ SRR1205 square 12.7 x 5.5 A / mΩ SRR1260 square 12.5 x 6.0 A / mΩ 9.20 / 8.0 2.20 / 32.0 2.80 / 28.0 2.00 / 40.0 2.50 / 35.0 5.60 / 14.0 3.20 / 32.0 1.80 / 55.0 2.30 / 50.0 9.20 / 9.5 5.00 / 24.0 7.80 / 11.5 6.80 / 15.0 4.50 / 30.0 7.50 / 13.0 2.10 / 55.0 2.10 / 70.0 4.80 / 19.0 2.40 / 27.0 2.90 / 36.0 1.60 / 70.0 2.00 / 60.0 2.00 / 42.0 2.70 / 40.0 6.00 / 18.0 6.80 / 15.5 4.00 / 35.0 2.50 / 46.0 3.80 / 28.0 5.40 / 20.0 6.60 / 17.0 1.20 / 100 1.60 / 70.0 1.60 / 54.0 2.30 / 50.0 5.20 / 23.0 3.40 / 32.0 1.10 / 120 1.30 / 120 1.40 / 68.0 0.90 / 180 1.10 / 130 1.10 / 95.0 0.70 / 270 0.90 / 190 0.96 / 135 0.60 / 430 0.70 / 250 0.76 / 200 0.50 / 550 0.60 / 350 0.67 / 280 0.40 / 900 0.50 / 500 0.60 / 380 0.30 / 1500 0.40 / 650 0.45 / 540 0.25 / 1900 0.30 / 1000 0.37 / 800 0.20 / 2700 0.25 / 1700 0.30 / 1300 0.18 / 4200 0.20 / 2100 0.22 / 1900 0.15 / 6700 0.18 / 3300 0.20 / 2400 0.12 / 9500 0.15 / 4800 0.16 / 3750 0.10 / 14000 0.12 / 6100 0.15 / 5400 1.84 / 49.0 1.71 / 58.0 1.47 / 81.0 1.31 / 91.0 1.23 / 110 1.12 / 150 0.96 / 170 0.91 / 230 0.88 / 260 0.75 / 350 0.69 / 380 0.61 / 430 0.60 / 610 0.52 / 660 0.46 / 880 0.42 / 980 0.36 / 1170 0.34 / 1640 0.32 / 1860 0.29 / 2850 0.26 / 3010 0.23 / 3620 0.22 / 4630 0.20 / 5200 0.18 / 6000 2.00 / 42.0 1.60 / 62.0 1.35 / 82.0 1.15 / 115 0.95 / 150 0.77 / 210 0.65 / 300 0.53 / 480 0.45 / 700 0.40 / 730 0.32 / 1100 0.27 / 1600 0.25 / 2400 2.10 / 55.0 1.80 / 80.0 1.70 / 85.0 1.60 / 100 1.50 / 110 1.40 / 130 1.30 / 140 1.20 / 150 1.10 / 160 1.00 / 180 0.93 / 300 0.85 / 350 0.78 / 370 0.70 / 420 0.65 / 480 0.60 / 550 0.52 / 820 0.48 / 1000 0.44 / 1100 0.40 / 1300 0.38 / 1400 0.35 / 1600 0.28 / 2700 0.25 / 3200 0.23 / 3500 0.22 / 4000 0.20 / 4400 0.18 / 5200 0.17 / 7000 0.16 / 8500 0.14 / 9200 0.12/11000 0.11/16000 0.10/19000 0.09/21000 0.09/24000 0.08/31000 0.07/38000 3.00 / 50.0 2.50 / 50.0 2.20 / 60.0 2.0/ / 75.0 1.90 / 80.0 1.80 / 90.0 1.70 / 100 1.50 / 140 1.40 / 150 1.35 / 170 1.25 / 180 1.05 / 260 1.00 / 280 0.90 / 340 0.80 / 450 0.70 / 500 0.65 / 600 0.60 / 700 0.55 / 800 0.50 / 1000 0.45 / 1150 0.38 / 1500 0.35 / 1700 0.32 / 2200 0.30 / 2500 4.00 / 32.0 3.50 / 47.0 3.00 / 67.5 2.30 / 97.5 2.00 / 135 1.50 / 200 1.25 / 300 3.50 / 40.0 6.00 / 19.0 3.00 / 54.0 2.80 / 65.0 2.70 / 70.0 2.60 / 82.0 2.40 / 95.0 2.00 / 120 1.80 / 145 1.65 / 160 1.50 / 200 1.40 / 240 1.30 / 280 1.20 / 330 1.00 / 400 0.90 / 500 0.80 / 580 0.70 / 750 0.65 / 840 0.60 / 1000 0.54 / 1340 0.50 / 1500 0.45 / 1980 0.40 / 2200 0.35 / 2400 0.30 / 3000 5.50 / 20.0 5.20 / 23.0 5.00 / 27.0 4.20 / 36.0 4.00 / 43.0 3.60 / 45.0 3.00 / 60.0 2.80 / 70.0 2.60 / 86.0 2.30 / 100 2.10 / 1100 1.95 / 1450 1.70 / 1800 1.50 / 2200 0.25 / 4000 0.20 / 5000 0.15 / 8000 0.12/12000 0.10/16500 0.10/24000 0.09/26000 0.08/40000 Specifications are subject to change without notice. SRR Series Shielded Power Inductors Selection Guide Ind uH Shape mm Term 0.47 0.8 1 1.2 1.4 1.5 1.8 2.2 2.5 2.7 3.0 3.3 3.5 3.9 4.5 4.7 5.0 5.6 6.5 6.8 7.0 7.5 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 SRR1206 square 12.7 x 6.5 A / mΩ SRR1280 square 12.5 x 7.5 A / mΩ SRR1208 square 12.7 x 8.5 A / mΩ Current Irms and DCR, Lead Free Power Inductors Shielded SRR1305 SRR6603 SRR6816 SRR0804 SRR0805 square oval oval oval oval 12.5 x 5.0 6.6x4.4x3.0 6.8x5.6x1.65 10x8.0x3.8 10x8.0x4.7 A / mΩ A / mΩ A / mΩ A / mΩ A / mΩ SRR1003 SRR1005 SRR1806 oval oval oval 12.7x10x3.0 12.7x10x5.0 18x14x6.8 A / mΩ A / mΩ A / mΩ 20.0 / 2.5 16.00 / 3.4 2.80 / 45.0 3.60 / 20.0 13.00 / 4.6 1.80 / 50.0 6.20 / 16.0 9.20 / 10.0 1.90 / 55.0 2.50 / 40.0 3.00 / 30.0 2.76 / 45.0 7.50 / 11.0 3.10 / 27.0 12.00 / 5.4 8.80 / 12.0 8.50 / 13.5 2.20 / 62.0 2.90 / 30.0 1.90 / 80.0 2.50 / 40.0 1.60 / 55.0 6.50 / 14.0 1.40 / 60.0 1.50 / 85.0 4.70 / 22.0 1.70 / 80.0 8.00 / 16.0 1.95 / 65.0 6.00 / 18.0 1.20 / 65.0 1.05 / 125 2.20 / 55.0 3.80 / 25.0 6.40 / 17.5 3.30 / 35.0 3.00 / 38.0 2.80 / 42.0 2.50 / 50.0 2.30 / 62.0 2.00 / 68.0 1.90 / 90.0 1.75 / 100 1.60 / 130 1.45 / 145 1.30 / 170 1.20 / 185 1.10 / 220 1.00 / 260 0.90 / 320 0.80 / 330 0.70 / 460 0.65 / 520 0.60 / 660 0.55 / 870 0.50 / 970 0.45 / 1320 0.40 / 1500 0.35 / 1700 0.30 / 2300 0.25 / 2650 0.20 / 3500 6.00 / 19.5 5.20 / 28.5 4.30 / 38.5 3.50 / 57.0 2.90 / 80.0 2.40 / 120 2.10 / 150 1.40 / 100 5.00 / 21.0 4.80 / 25.0 4.00 / 35.0 3.80 / 40.0 3.50 / 43.0 3.00 / 48.0 2.80 / 62.0 2.50 / 76.0 2.20 / 85.0 2.00 / 110 1.80 / 135 1.60 / 150 1.50 / 170 1.40 / 190 1.30 / 240 1.20 / 270 1.10 / 380 0.95 / 400 0.85 / 650 0.80 / 670 0.70 / 850 0.65 / 900 0.60 / 1000 0.55 / 1150 0.50 / 1650 0.40 / 2000 0.36 / 2350 Specifications are subject to change without notice. 1.00 / 75.0 0.96 / 170 0.80 / 90.0 0.70 / 265 0.70 / 110 0.60 / 390 0.60 / 190 0.42 / 520 0.50 / 230 0.38 / 770 0.40 / 290 0.32 / 1050 0.30 / 480 0.24 / 1650 0.26 / 590 0.22 / 770 0.20 / 1400 0.19 / 1800 0.18 / 2200 0.15 / 3400 0.12 / 4200 0.10 / 8500 0.08/11000 1.20 / 120 1.10 / 150 1.00 / 170 0.90 / 190 0.80 / 250 0.70 / 270 0.65 / 300 0.60 / 380 0.55 / 460 0.50 / 600 0.45 / 700 0.40 / 800 0.37 / 950 0.35 / 1000 0.30 / 1300 0.28 / 1450 0.24 / 1900 0.22 / 2150 0.19 / 2800 0.17 / 3300 0.16 / 3600 1.44 / 100 1.75 / 80.0 1.50 / 100 1.40 / 120 1.30 / 140 1.20 / 160 1.10 / 180 1.00 / 200 0.92 / 240 0.84 / 260 0.75 / 280 0.68 / 380 0.60 / 440 0.54 / 550 0.50 / 600 0.45 / 750 0.40 / 900 0.35 / 1050 0.30 / 1180 0.27 / 1400 0.24 / 1800 0.22 / 2100 0.20 / 2250 0.18 / 3000 0.17 / 3400 0.16 / 4000 0.15 / 5000 1.24 / 150 1.10 / 190 1.02 / 200 0.90 / 270 0.85 / 300 0.75 / 400 0.70 / 450 0.65 / 560 0.60 / 650 0.52 / 680 0.48 / 800 0.42 / 1200 0.40 / 1400 0.35 / 1520 0.32 / 1800 0.28 / 2200 0.26 / 2200 0.22 / 3100 0.20 / 3600 0.18 / 4600 0.16 / 5100 2.00 / 65.0 1.80 / 80.0 1.70 / 85.0 1.60 / 90.0 1.40 / 100 1.30 / 120 1.20 / 160 1.05 / 180 1.00 / 190 0.90 / 210 0.82 / 340 0.75 / 380 0.68 / 420 0.60 / 460 0.55 / 520 0.50 / 700 0.45 / 800 0.40 / 1100 0.35 / 1200 0.33 / 1400 0.30 / 1600 0.28 / 1800 0.26 / 2300 0.24 / 2600 0.22 / 3200 0.20 / 3600 0.17 / 5200 0.16 / 5700 0.14 / 6500 0.12 / 8600 0.10/10000 4.00 / 33.0 3.60 / 39.0 3.00 / 53.0 2.50 / 83.0 2.00 / 110 1.60 / 170 1.30 / 270 1.05 / 400 1.00 / 510 0.80 / 790 0.64 / 1000 0.54 / 1470 0.45 / 2160 0.06/13900 0.04/25000 0.02/32800 45 SRU Series Shielded Power Inductors Selection Guide Ind uH shape mm Term 0.8 1.0 1.2 1.5 1.8 2.2 2.5 3.0 3.3 3.5 3.9 4.7 5.0 6.2 6.8 8.2 10 15 22 33 47 56 68 82 100 120 150 220 330 SRU1028 hexagonal 10 x 2.8 A / m SRU1038 hexagonal 10 x 3.8 A/m SRU1048 hexagonal 10 x 4.8 A/m 7.80 / 3.6 Current Irms and DCR, Lead Free Power Inductors Shielded SRU3011 SRU3017 SRU3028 SRU5011 SRU5016 hexagonal hexagonal hexagonal hexagonal hexagonal 3.3 x 1.2 3.3 x 1.8 3.3 x 2.8 5 x 1.1 5 x 1.6 A / m A/m A/m A / m A / m 7.00 / 4.9 SRU5018 hexagonal 5 x 1.8 A / m SRU5028 hexagonal 5 x 2.8 A/m SRU8028 hexagonal 8 x 2.8 A / m SRU8043 hexagonal 8 x 4.3 A/m 2.80 / 12.5 3.50 / 16.8 6.50 / 7.3 7.20 / 5.0 7.00 / 4.3 1.10 / 57.0 1.80 / 32.0 5.30 / 11.0 6.80 / 7.7 6.50 / 5.3 0.92 / 80.0 0.98 / 35.0 2.50 / 15.5 1.75 / 24.0 2.30 / 20.5 3.20 / 21.0 1.30 / 52.0 5.40 / 11.2 4.50 / 13.6 6.20 / 7.2 4.60 / 15.0 0.84 / 116 0.80 / 55.0 1.15 / 66.0 1.55 / 35.0 5.50 / 11.5 2.80 / 24.0 3.60 / 17.5 2.10 / 32.0 5.50 / 9.5 0.63 / 178 0.63 / 68.0 4.80 / 14.6 1.00 / 95.0 1.30 / 42.0 2.00 / 36.0 2.20 / 32.0 3.70 / 20.0 4.60 / 17.0 0.50 / 245 0.53 / 85.0 0.82 / 130 1.20 / 50.0 1.45 / 50.0 2.00 / 42.0 2.80 / 34.0 3.80 / 22.4 0.35 / 340 0.47 0.35 0.30 0.25 0.21 0.70 0.60 0.50 0.38 0.32 1.00 / 84.0 0.80 / 130 0.65 / 195 0.54 / 300 0.46 / 390 1.30 / 220 4.80 / 13.6 4.60 / 15.0 4.50 / 18.5 3.20 / 29.0 2.60 / 42.0 2.10 / 63.0 1.70 / 94.0 1.60 / 110 1.40 / 127 1.30 / 149 1.20 / 160 0.90 / 358 0.65 / 565 0.55 / 773 1.00 / 235 0.80 / 350 0.65 / 490 4.50 / 16.5 4.60 / 14.5 4.00 / 16.5 3.50 / 25.0 3.30 / 28.5 2.80 / 40.0 2.00 / 69.0 1.60 / 104 1.25 / 139 1.30 / 167 1.10 / 208 1.00 / 232 090 / 323 0.85 / 365 0.65 / 428 0.60 / 518 3.80 / 25.0 2.80 / 37.0 2.20 / 55.8 1.80 / 86.0 1.65 / 121 1.10 / 166 / / / / / 120 175 250 430 540 0.72 0.66 0.60 0.47 0.32 / / / / / 160 230 270 450 815 / / / / / 170 250 380 550 800 1.25 / 65.0 1.80 / 63.0 2.60 / 45.0 3.50 / 30.0 0.95 / 100 1.10 / 108 2.00 / 66.0 2.70 / 46.0 0.68 / 160 0.95 / 162 1.60 / 106 2.20 / 72.5 0.66 / 220 0.80 / 203 1.30 / 147 1.70 / 100 0.54 / 330 0.70 / 285 1.20 / 177 1.50 / 120 0.24 / 1400 0.26 / 1240 0.36 / 560 0.37 / 480 0.56 / 450 0.85 / 317 1.20 / 192 0.19 / 2200 0.20 / 1600 0.30 / 850 0.32 / 620 0.47 / 625 0.75 / 390 1.00 / 287 Soldering Profile 46 Specifications are subject to change without notice. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low profile of only 2.5 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Low inductance values ■ RoHS compliant* SDR0302 Series - SMD Power Inductors Electrical Specifications Bourns Part No. SDR0302-1R0ML SDR0302-1R2ML SDR0302-1R5ML SDR0302-1R8ML SDR0302-2R2ML SDR0302-2R7ML SDR0302-3R3ML SDR0302-3R9ML SDR0302-4R7ML SDR0302-5R6ML SDR0302-6R8ML SDR0302-8R2ML SDR0302-100ML SDR0302-120ML SDR0302-150ML SDR0302-180ML SDR0302-220ML SDR0302-270ML SDR0302-330KL SDR0302-390KL SDR0302-470KL SDR0302-560KL SDR0302-680KL SDR0302-820KL SDR0302-101KL SDR0302-121KL SDR0302-151KL SDR0302-181KL SDR0302-221KL SDR0302-271KL SDR0302-331KL SDR0302-391KL SDR0302-471KL SDR0302-561KL SDR0302-681KL SDR0302-821KL SDR0302-102KL SDR0302-122KL Inductance 1kHz (µH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 820.0 1000.0 1200.0 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 20 22 23 23 22 22 23 24 18 18 18 16 18 15 20 18 23 23 20 24 23 18 24 24 40 40 38 45 40 45 40 40 42 43 43 45 40 40 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 125.0 100.0 95.0 85.0 75.0 72.0 68.0 50.0 45.0 42.0 40.0 35.0 34.0 33.0 32.0 28.0 22.0 20.0 18.0 18.0 17.0 16.0 14.0 12.0 10.0 10.0 9.0 8.5 8.0 7.0 6.0 5.5 5.0 4.8 4.3 4.0 3.2 3.0 0.06 0.07 0.07 0.08 0.09 0.10 0.11 0.12 0.15 0.16 0.18 0.20 0.25 0.28 0.40 0.46 0.66 0.75 0.85 1.12 1.27 1.45 1.85 2.10 2.85 3.20 4.60 5.00 5.70 8.60 10.00 10.80 14.30 16.00 18.00 22.50 26.00 30.00 2.100 2.000 1.900 1.800 1.650 1.500 1.400 1.300 1.200 1.100 1.000 0.900 0.800 0.750 0.650 0.580 0.520 0.480 0.420 0.380 0.360 0.340 0.300 0.280 0.260 0.220 0.200 0.185 0.170 0.150 0.130 0.120 0.105 0.095 0.085 0.080 0.070 0.060 2.700 2.500 2.300 2.000 1.850 1.700 1.600 1.500 1.350 1.300 1.200 1.050 0.900 0.850 0.800 0.750 0.650 0.550 0.500 0.450 0.400 0.350 0.320 0.300 0.280 0.250 0.230 0.210 0.190 0.170 0.150 0.140 0.130 0.120 0.110 0.100 0.090 0.080 Electrical Schematic DIMENSIONS: *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ........................................Ferrite DR Wire .............Enameled copper wire 130 Terminal.....................................Ag/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ..................1000 pcs. per reel Product Dimensions Recommended Layout Typical Part Marking MM (INCHES) 47 SDR0302 Series - SMD Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 1000 PCS. PER REEL 48 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low profile of only 3.2 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Low inductance values ■ RoHS compliant* SDR0403 Series - SMD Power Inductors Electrical Specifications Bourns Part No. SDR0403-1R0ML SDR0403-1R4ML SDR0403-1R8ML SDR0403-2R2ML SDR0403-2R7ML SDR0403-3R3ML SDR0403-3R9ML SDR0403-4R7ML SDR0403-5R6ML SDR0403-6R8ML SDR0403-8R2ML SDR0403-100ML SDR0403-120ML SDR0403-150ML SDR0403-180ML SDR0403-220ML SDR0403-270KL SDR0403-330KL SDR0403-390KL SDR0403-470KL SDR0403-560KL SDR0403-680KL SDR0403-820KL SDR0403-101KL SDR0403-121KL SDR0403-151KL SDR0403-181KL SDR0403-221KL SDR0403-271KL SDR0403-331KL SDR0403-391KL SDR0403-471KL SDR0403-561KL SDR0403-681KL SDR0403-821KL SDR0403-102KL Inductance 1kHz (µH) 1.0 1.4 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 28 28 28 28 28 28 28 28 28 28 28 28 28 28 25 25 23 23 20 20 20 20 25 35 50 50 50 50 45 40 40 50 50 40 38 38 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 1K 1K 1K 1K 1K 1K 1K 150 110 90 80 75 65 55 50 45 40 36 33 30 28 23 20 17 15 14 13 12 11 10 9 8 8 5 4 3 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.033 0.038 0.042 0.047 0.052 0.058 0.076 0.094 0.10 0.12 0.13 0.18 0.21 0.24 0.34 0.38 0.52 0.54 0.59 0.84 0.94 1.12 1.27 1.90 2.20 3.40 3.90 4.40 5.00 6.00 6.40 7.00 7.80 8.60 12.00 14.00 3.80 3.30 2.91 2.60 2.43 2.15 1.98 1.70 1.60 1.41 1.26 1.15 1.05 0.92 0.84 0.76 0.71 0.64 0.59 0.54 0.50 0.46 0.42 0.35 0.32 0.26 0.24 0.22 0.20 0.17 0.15 0.13 0.12 0.11 0.10 0.09 5.50 5.10 4.40 3.90 3.50 3.00 2.70 2.60 2.40 2.10 1.90 1.70 1.60 1.40 1.30 1.20 1.00 0.99 0.92 0.78 0.74 0.68 0.58 0.51 0.44 0.40 0.39 0.33 0.30 0.25 0.22 0.19 0.18 0.16 0.15 0.13 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ........................................Ferrite DR Wire .............Enameled copper wire 130 Terminal.....................................Ag/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ..................2000 pcs. per reel Product Dimensions Recommended Layout Electrical Schematic Typical Part Marking DIMENSIONS: *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 49 SDR0403 Series - SMD Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 2000 PCS. PER REEL 50 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low profile of only 3.3 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High inductance of 15 mH ■ RoHS compliant* SDR0503 Series - SMD Power Inductors Electrical Specifications Bourns Part No. Inductance 1kHz (µH) SDR0503-100ML 10 SDR0503-120ML 12 SDR0503-150ML 15 SDR0503-180ML 18 SDR0503-220ML 22 SDR0503-270ML 27 SDR0503-330KL 33 SDR0503-390KL 39 SDR0503-470KL 47 SDR0503-560KL 56 SDR0503-680KL 68 SDR0503-820KL 82 SDR0503-101KL 100 SDR0503-121KL 120 SDR0503-151KL 150 SDR0503-181KL 180 SDR0503-221KL 220 SDR0503-271KL 270 SDR0503-331KL 330 SDR0503-391KL 390 SDR0503-471KL 470 SDR0503-561KL 560 SDR0503-681KL 680 SDR0503-821KL 820 SDR0503-102KL 1000 SDR0503-122JL 1200 SDR0503-152JL 1500 SDR0503-182JL 1800 SDR0503-222JL 2200 SDR0503-272JL 2700 SDR0503-332JL 3300 SDR0503-392JL 3900 SDR0503-472JL 4700 SDR0503-562JL 5600 SDR0503-682JL 6800 SDR0503-822JL 8200 SDR0503-103JL 10000 SDR0503-123JL 12000 SDR0503-153JL 15000 Tol. % Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 ±5 10 20 20 20 20 20 15 15 20 20 20 15 40 40 40 40 35 35 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 40 40 40 30 30 30 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.0796 0.0796 0.0796 30.0 29.0 27.0 24.0 22.0 20.0 18.0 17.0 14.0 13.0 12.0 10.0 9.0 8.0 7.0 7.0 6.0 6.0 5.0 5.0 5.0 4.0 4.0 3.0 3.0 3.0 2.0 2.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.13 0.16 0.19 0.21 0.28 0.32 0.38 0.42 0.60 0.71 0.76 0.88 1.60 1.70 2.00 2.30 2.50 2.90 3.30 3.70 4.90 5.70 7.50 10.00 11.50 12.00 13.00 15.00 22.00 26.00 38.00 40.00 48.00 72.00 80.00 92.00 110.00 148.00 168.00 1.300 1.200 1.050 0.950 0.900 0.800 0.700 0.650 0.600 0.500 0.450 0.420 0.400 0.370 0.330 0.300 0.250 0.230 0.210 0.190 0.180 0.160 0.140 0.120 0.110 0.063 0.059 0.055 0.053 0.050 0.045 0.042 0.040 0.038 0.034 0.030 0.027 0.025 0.020 1.600 1.450 1.260 1.300 1.060 1.000 0.850 0.800 0.750 0.700 0.600 0.520 0.480 0.450 0.400 0.350 0.340 0.280 0.280 0.240 0.220 0.190 0.160 0.155 0.135 0.090 0.072 0.070 0.070 0.070 0.062 0.060 0.050 0.050 0.045 0.045 0.040 0.038 0.032 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ........................................Ferrite DR Wire ............................Enameled copper Terminal.....................................Ag/Ni/Sn Rated Current..Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ....................500 pcs. per reel Product Dimensions Recommended Layout Typical Part Marking DIMENSIONS: MM (INCHES) 51 SDR0503 Series - SMD Power Inductors Packaging Specifications QTY: 500 PCS. PER REEL DIMENSIONS: 52 MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Unit height of 2.2 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 1.5 A ■ High Q level ■ RoHS compliant* SDR0602 Series - SMD High Power Inductor Electrical Specifications Bourns Part No. SDR0602-2R7ML SDR0602-3R9ML SDR0602-4R7ML SDR0602-5R6ML SDR0602-6R8ML SDR0602-8R2ML SDR0602-100ML SDR0602-120ML SDR0602-150ML SDR0602-180ML SDR0602-220ML SDR0602-270ML SDR0602-330KL SDR0602-390KL SDR0602-470KL SDR0602-560KL SDR0602-680KL SDR0602-820KL SDR0602-101KL SDR0602-121KL SDR0602-151KL SDR0602-181KL SDR0602-221KL SDR0602-271KL SDR0602-331KL SDR0602-391KL SDR0602-471KL SDR0602-561KL Inductance 1kHz (µH) Tol. % Q Ref. 2.7 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ±10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 20 20 20 18 18 15 50 45 45 45 45 40 35 32 30 30 27 27 50 50 60 55 55 55 55 55 55 55 Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 40 40 35 30 28 27 25 21 20 18 16 15 12 12 11 10 9 8 7 6 6 5 5 4 4 3 3 3 0.12 0.13 0.15 0.17 0.18 0.20 0.24 0.26 0.28 0.30 0.40 0.45 0.50 0.65 0.68 0.78 0.85 1.30 1.52 1.65 2.00 2.30 2.50 2.85 3.80 4.20 5.00 6.20 1.50 1.40 1.30 1.20 1.15 1.10 1.00 0.90 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 0.32 0.30 0.26 0.23 0.20 0.18 0.16 0.15 0.14 0.12 2.10 1.90 1.80 1.60 1.55 1.43 1.32 1.17 1.10 1.07 0.90 0.83 0.73 0.68 0.62 0.57 0.52 0.46 0.42 0.38 0.24 0.32 0.29 0.26 0.22 0.20 0.18 0.14 General Specifications Test Voltage ....................................1 Volt Reflow Soldering .....260 ˚C, 50 sec max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Packaging.....................800 pcs. per reel Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core Material ..........................Ferrite DQ Wire ............................Enameled Copper Terminal.....................................Ag/Ni/Sn Rated Current...Ind. drop 10 % typ. at Isat Temperature Rise. . .40 ˚C max at rated Irms Product Dimensions Recommended Layout Multiple winding possible (up to two windings). Electrical Schematic Typical Part Marking DIMENSIONS: *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 53 SDR0602 Series - SMD Power Inductors Packaging Specifications QTY: 800 PCS. PER REEL DIMENSIONS: 54 MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Small design of only 5.8 mm maximum ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios diameter ■ Low 3.9 mm profile ■ RoHS compliant* SDR0603 Series - SMD Power Inductors Electrical Specifications Bourns Part No. SDR0603-1R5ML SDR0603-2R5ML SDR0603-3R3ML SDR0603-3R9ML SDR0603-4R7ML SDR0603-5R0ML SDR0603-6R8ML SDR0603-7R5ML SDR0603-100ML SDR0603-120ML SDR0603-150ML SDR0603-180ML SDR0603-220ML SDR0603-270ML SDR0603-330KL SDR0603-390KL SDR0603-470KL SDR0603-560KL SDR0603-680KL SDR0603-820KL SDR0603-101KL SDR0603-121KL SDR0603-151KL SDR0603-181KL SDR0603-221KL SDR0603-271KL SDR0603-331KL SDR0603-391KL SDR0603-471KL Inductance 1kHz (µH) 1.5 2.5 3.3 3.9 4.7 5.0 6.8 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 24 21 21 22 20 19 19 19 24 23 22 23 20 19 23 22 20 17 17 15 28 27 28 26 26 26 28 28 29 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 85 74 68 62 56 50 44 38 34 30 28 24 30 19 15 13 13 12 12 11 10 8 8 7 6 5 5 4 4 0.04 0.05 0.05 0.05 0.07 0.07 0.11 0.12 0.15 0.16 0.18 0.25 0.28 0.30 0.45 0.46 0.55 0.62 0.72 0.84 0.95 1.10 1.43 1.60 2.00 2.40 3.20 3.40 4.55 3.00 2.35 2.20 2.10 1.80 1.60 1.38 1.29 1.14 1.02 0.93 0.82 0.75 0.67 0.61 0.56 0.52 0.48 0.44 0.40 0.38 0.36 0.32 0.30 0.26 0.24 0.20 0.18 0.15 3.50 2.70 2.60 2.20 2.20 2.10 1.80 1.60 1.40 1.30 1.10 1.10 0.96 0.86 0.70 0.66 0.62 0.58 0.54 0.48 0.66 0.60 0.56 0.50 0.46 0.38 0.36 0.32 0.26 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ...............................Ferrite DR core Wire ............................Enameled copper Terminal.....................................Ag/Ni/Sn Rated Current..Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging.....................400 pcs. per reel Product Dimensions Recommended Layout Typical Part Marking *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DIMENSIONS: MM (INCHES) 55 SDR0603 Series - SMD Power Inductors Packaging Specifications QTY: 400 PCS. PER REEL DIMENSIONS: 56 MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Small diameter of only 5.8 mm maxi- ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios mum ■ Profile of 4.8 mm ■ RoHS compliant* SDR0604 Series - SMD Power Inductors Electrical Specifications Bourns Part No. SDR0604- 1R2ML SDR0604- 1R5ML SDR0604- 2R2ML SDR0604- 2R7ML SDR0604- 3R3ML SDR0604-3R9ML SDR0604- 4R7ML SDR0604- 5R6ML SDR0604- 6R8ML SDR0604- 8R2ML SDR0604- 100ML SDR0604- 120ML SDR0604- 150YL SDR0604- 180YL SDR0604- 220YL SDR0604- 270YL SDR0604- 330KL SDR0604- 390KL SDR0604- 470KL SDR0604- 560KL SDR0604- 680KL SDR0604- 820KL SDR0604- 101KL SDR0604- 121KL SDR0604- 151KL SDR0604- 181KL SDR0604- 221KL SDR0604- 271KL SDR0604- 331KL SDR0604- 391KL SDR0604- 471KL SDR0604- 561KL SDR0604- 681KL SDR0604- 821KL Inductance 1kHz (µH) 1.2 1.5 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 35 32 33 22 22 22 20 20 20 20 30 30 30 30 30 28 24 24 22 22 22 20 20 22 20 20 20 26 25 25 25 24 26 25 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 155 108 79 65 60 40 34 30 28 26 23 22 20 18 16 14 13 13 12 11 10 9 9 7 6 6 6 4 3 3 3 3 2 2 0.02 0.03 0.06 0.06 0.07 0.07 0.08 0.08 0.12 0.09 0.10 0.12 0.14 0.15 0.19 0.22 0.25 0.32 0.37 0.42 0.52 0.60 0.70 0.93 1.10 1.38 1.57 1.88 2.25 2.48 3.30 4.00 4.65 5.20 4.2 3.60 2.80 2.30 2.00 1.90 1.80 1.70 1.60 1.50 1.45 1.40 1.30 1.25 1.10 1.00 0.88 0.80 0.72 0.68 0.62 0.58 0.52 0.48 0.40 0.38 0.35 0.32 0.27 0.25 0.21 0.18 0.16 0.14 7.30 6.10 5.10 3.80 3.50 3.20 3.00 2.70 2.50 2.30 2.00 1.90 1.60 1.50 1.40 1.30 1.10 1.00 1.00 0.90 0.84 0.75 0.68 0.60 0.54 0.50 0.44 0.40 0.36 0.34 0.30 0.26 0.25 0.20 General Specifications Test Voltage ........................................1 V Reflow soldering.....230 °C, 50 sec max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ................................Ferrite DR core Wire .............................Enameled copper Terminal:....................................Ag/Ni/Sn Rated Current..Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................400 pcs. per reel Product Dimensions Recommended Layout Typical Part Marking *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DIMENSIONS: MM (INCHES) 57 SDR0604 Series - SMD Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 400 PCS. PER REEL 58 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low height of only 2.7 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High Isat of 3.2 Amps ■ RoHS compliant* SDR0703 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR0703-1R0ML SDR0703-1R2ML SDR0703-1R8ML SDR0703-2R2ML SDR0703-2R7ML SDR0703-3R3ML SDR0703-3R9ML SDR0703-4R7ML SDR0703-5R6ML SDR0703-6R8ML SDR0703-8R2ML SDR0703-100KL SDR0703-120KL SDR0703-150KL SDR0703-180KL SDR0703-220KL SDR0703-270KL SDR0703-330KL SDR0703-390KL SDR0703-470KL SDR0703-560KL SDR0703-680KL SDR0703-820KL SDR0703-101KL SDR0703-121KL SDR0703-151KL SDR0703-181KL SDR0703-221KL SDR0703-271KL SDR0703-331KL SDR0703-391KL SDR0703-471KL SDR0703-561KL SDR0703-681KL SDR0703-821KL SDR0703-102KL (µH) 1.0 1.2 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 25 25 25 24 23 23 22 20 20 20 20 23 20 23 20 20 20 17 18 20 20 18 18 33 32 30 33 31 30 33 36 33 36 32 32 30 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 160.0 145.0 105.0 95.0 80.0 65.0 70.0 60.0 56.0 45.0 40.0 36.0 36.0 30.0 30.0 26.0 20.0 20.0 18.0 15.0 13.0 13.0 12.0 11.0 10.0 9.0 7.0 7.0 7.0 6.0 5.5 5.0 4.2 4.0 3.6 3.2 0.042 0.047 0.052 0.060 0.065 0.075 0.080 0.100 0.105 0.115 0.150 0.170 0.180 0.240 0.280 0.300 0.400 0.450 0.550 0.720 0.800 0.900 1.18 1.56 1.75 2.00 2.70 3.00 3.60 4.80 6.20 7.00 9.20 10.50 12.00 14.20 2.20 2.00 1.90 1.80 1.70 1.65 1.58 1.50 1.40 1.30 1.10 1.00 0.90 0.75 0.70 0.65 0.60 0.56 0.50 0.40 0.39 0.38 0.33 0.27 0.26 0.25 0.19 0.18 0.17 0.16 0.14 0.13 0.11 0.10 0.09 0.08 3.20 3.00 2.70 2.60 2.50 2.35 2.25 2.10 2.00 1.90 1.50 1.40 1.30 1.12 1.05 0.95 0.88 0.82 0.73 0.64 0.60 0.56 0.47 0.40 0.37 0.34 0.30 0.28 0.22 0.19 0.18 0.16 0.15 0.15 0.14 0.13 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature ..-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ..............................................Ferrite Wire ................Enameled copper 130 °C Base..................................................LCP Adhesive ....................................6020H-6 Terminal .........................................Cu/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................20 °C max. at rated Irms Packaging ....................500 pcs. per reel Product Dimensions Recommended Layout Electrical Schematic *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DIMENSIONS: MM (INCHES) 59 SDR0703 Series - SMD Power Inductors Typical Part Marking Packaging Specifications QTY: 500 PCS. PER REEL DIMENSIONS: 60 MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Small design of only 7.8 mm maximum ■ Power supplies for: diameter ■ RoHS compliant* • Portable communications equipment • Camcorders • LCD TVs • CD-players • Car radios SDR0805 Series - SMD Power Inductors Electrical Specifications Bourns Part No. SDR0805-1R5ML SDR0805-2R5ML SDR0805-3R3ML SDR0805-3R9ML SDR0805-4R7ML SDR0805-5R6ML SDR0805-6R8ML SDR0805-7R5ML SDR0805-100ML SDR0805-120ML SDR0805-150ML SDR0805-180ML SDR0805-220ML SDR0805-270KL SDR0805-330KL SDR0805-390KL SDR0805-470KL SDR0805-560KL SDR0805-680KL SDR0805-820KL SDR0805-101KL SDR0805-121KL SDR0805-151KL SDR0805-181KL SDR0805-221KL SDR0805-271KL SDR0805-331KL SDR0805-391KL SDR0805-471KL SDR0805-561KL SDR0805-681KL SDR0805-821KL SDR0805-102KL SDR0805-122KL SDR0805-152KL SDR0805-182KL SDR0805-222KL SDR0805-272KL SDR0805-332KL SDR0805-392KL SDR0805-472KL Inductance 1kHz (µH) 1.5 2.5 3.3 3.9 4.7 5.6 6.8 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 32 32 32 32 31 31 30 29 25 25 25 20 20 20 15 15 15 15 15 12 12 12 12 12 12 12 12 12 12 30 29 28 27 28 27 30 29 31 28 28 30 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 120 70 55 45 38 34 33 30 22 20 16 15 13 12 10 10 9 9 8 7 7 6 6 5 5 5 4 4 4 4 3 3 3 2 2 2 2 1 1 1 1 0.02 0.02 0.02 0.02 0.03 0.04 0.04 0.05 0.07 0.08 0.09 0.10 0.11 0.12 0.14 0.16 0.20 0.24 0.30 0.37 0.45 0.48 0.68 0.77 0.96 1.11 1.26 1.77 1.96 2.50 2.80 4.00 4.50 6.80 8.00 9.20 10.00 11.80 16.50 18.00 21.00 6.00 5.00 4.50 4.40 3.70 3.50 3.20 2.80 2.30 2.00 1.80 1.60 1.50 1.30 1.20 1.10 1.00 0.94 0.85 0.78 0.72 0.66 0.58 0.51 0.49 0.42 0.40 0.36 0.34 0.30 0.28 0.23 0.21 0.17 0.15 0.14 0.13 0.12 0.10 0.09 0.08 9.10 7.20 6.30 5.70 5.00 4.60 4.10 3.70 3.20 3.00 2.70 2.60 2.30 2.10 1.90 1.70 1.60 1.50 1.30 1.20 1.10 1.00 0.85 0.80 0.80 0.66 0.58 0.55 0.50 0.46 0.42 0.35 0.34 0.28 0.26 0.23 0.20 0.18 0.17 0.16 0.15 General Specifications Test Frequency ..............................1 KHz Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ................................Ferrite DR core Wire .....................Enameled copper wire Terminal.....................................Ag/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise .......................40°C max. at rated Irms Packaging...................1000 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: MM (INCHES) Typical Part Marking *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 61 SDR0805 Series - SMD Power Inductors Materials Packaging Specifications Paper Plastics DIMENSIONS: MM (INCHES) QTY: 1000 PCS. PER REEL Strength Of Cover Tape The force for tearing off cover tape is 10 to 130 grams in the arrow direction. 62 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ High inductance up to 1.2 mH ■ Input/output of DC/DC converters ■ E12 series available ■ Power supplies for: • Portable communications equipment • Camcorders • LCD TVs • Car radios ■ Wide inductance range ■ RoHS compliant* SDR0906 Series - SMD Power Inductors Electrical Specifications Bourns Part No. Inductance 1kHz (µH) SDR0906-2R2ML 2.2 SDR0906-2R7ML 2.7 SDR0906-3R9ML 3.9 SDR0906-4R7ML 4.7 SDR0906-5R6ML 5.6 SDR0906-6R8ML 6.8 SDR0906-8R2ML 8.2 SDR0906-100 ML 10 SDR0906-120 ML 12 SDR0906-150 ML 15 SDR0906-180 ML 18 SDR0906-220 ML 22 SDR0906-270 KL 27 SDR0906-330 KL 33 SDR0906-390 KL 39 SDR0906-470 KL 47 SDR0906-560 KL 56 SDR0906-680 KL 68 SDR0906-820 KL 82 SDR0906-101 KL 100 SDR0906-121 KL 120 SDR0906-151 KL 150 SDR0906-181 KL 180 SDR0906-221 KL 220 SDR0906-271 KL 270 SDR0906-331 KL 330 SDR0906-391 KL 390 SDR0906-471 KL 470 SDR0906-561 KL 560 SDR0906-681 KL 680 SDR0906-821 KL 820 SDR0906-102 KL 1000 SDR0906-122 KL 1200 SDR0906-152 KL 1500 SDR0906-182 KL 1800 SDR0906-222 KL 2200 SDR0906-272 KL 2700 SDR0906-332 KL 3300 SDR0906-392 KL 3900 SDR0906-472 KL 4700 SDR0906-562 KL 5600 SDR0906-682 KL 6800 SDR0906-822 KL 8200 SDR0906-103 KL 10000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 30 30 28 27 28 27 27 35 35 35 35 35 35 35 25 25 25 20 20 15 15 15 15 20 20 15 15 15 15 15 15 60 60 70 60 94 90 78 96 86 100 90 100 100 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.0796 105 84 77 55 42 36 29 25 23 22 19 16 15 14 13 12 12 10 9 8 8 7 6 6 5 5 5 5 4 4 3 2 2 2 2 2 1 1 1 1 1 1 1 1 0.03 0.04 0.04 0.05 0.06 0.06 0.07 0.09 0.10 0.11 0.12 0.13 0.15 0.18 0.19 0.23 0.26 0.31 0.33 0.39 0.43 0.56 0.64 0.85 1.00 1.27 1.40 1.63 2.10 2.40 2.75 3.50 4.00 5.00 5.80 8.00 9.00 10.00 13.50 15.00 20.00 23.00 28.00 33.00 4.00 3.50 3.30 3.00 2.80 2.60 2.40 2.10 2.00 1.90 1.80 1.60 1.40 1.25 1.15 1.10 1.05 1.00 0.95 0.90 0.85 0.75 0.70 0.60 0.55 0.50 0.45 0.40 0.32 0.28 0.24 0.22 0.20 0.18 0.17 0.14 0.13 0.12 0.10 0.09 0.07 0.06 0.05 0.04 6.70 6.50 5.50 4.80 4.50 4.20 4.00 3.20 3.10 2.90 2.40 2.40 2.20 2.00 1.60 1.50 1.40 1.40 1.30 1.10 1.10 0.90 0.82 0.80 0.76 0.65 0.64 0.57 0.53 0.46 0.36 0.35 0.28 0.26 0.24 0.23 0.23 0.18 0.18 0.16 0.15 0.14 0.12 0.10 Multiple windings possible (up to four windings). General Specifications Test Frequency ..............................1 KHz Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ...............................Ferrite DR core Wire ....................Enameled copper wire Base..................................................LCP Adhesive ...............................Epoxy resin Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout Electrical Schematic *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 63 SDR0906 Series - SMD Power Inductors Materials Packaging Specifications Paper Plastics Typical Part Marking DIMENSIONS: MM (INCHES) 600 PCS. PER REEL Strength Of Cover Tape The force for tearing off cover tape is 10 to 130 grams in the arrow direction. 64 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low profile of only 5.0 mm ■ Power supplies for: • Portable communications equipment • Camcorders • LCD TVs • Car radios ■ Inductance as low as 1 µH ■ RoHS compliant* SDR1005 Series - SMD Power Inductors Electrical Specifications Bourns Part No. Inductance 1kHz (µH) SDR1005-1R0ML 1 SDR1005-1R5ML 1.5 SDR1005-2R5ML 2.5 SDR1005-3R3ML 3.3 SDR1005-4R7ML 4.7 SDR1005-6R8ML 6.8 SDR1005-100ML 10 SDR1005-150ML 15 SDR1005-220ML 22 SDR1005-330KL 33 SDR1005-470KL 47 SDR1005-680KL 68 SDR1005-101KL 100 SDR1005-151KL 150 SDR1005-221KL 220 SDR1005-331KL 330 SDR1005-471KL 470 SDR1005-681KL 680 SDR1005-102KL 1000 SDR1005-152KL 1500 SDR1005-222KL 2200 SDR1005-332KL 3300 SDR1005-472KL 4700 SDR1005-682KL 6800 SDR1005-822KL 8200 SDR1005-103KL 10000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 20 50 50 50 50 50 50 50 40 25 25 25 30 30 33 33 57 57 81 91 91 93 93 93 100 101 10 3 3 4 4 3 3 3 3 1 1 1 0.05 0.05 0.05 0.05 0.05 0.05 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 137 95 56 54 42 31 26 22 18 14 12 11 8 6 5 4 4 3 2 2 2 1 1 1 1 1 0.007 0.009 0.012 0.015 0.019 0.030 0.050 0.060 0.10 0.12 0.19 0.24 0.33 0.59 0.78 1.15 1.70 2.60 3.90 6.30 8.20 14.00 17.00 30.00 34.00 39.00 7.50 6.50 5.50 5.00 4.50 3.40 2.90 2.50 2.00 1.80 1.40 1.20 1.00 0.80 0.70 0.55 0.45 0.35 0.30 0.25 0.20 0.16 0.15 0.11 0.11 0.10 9.00 8.00 7.00 6.40 5.40 4.50 3.70 3.00 2.50 2.00 1.60 1.40 1.20 1.00 0.80 0.60 0.50 0.40 0.35 0.30 0.24 0.18 0.16 0.12 0.12 0.11 General Specifications Test Voltage.....................................0.1 V Reflow soldering.....230 °C; 10 sec max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core.........................................Ferrite DR Wire .............................Enameled copper Base ......................................LCP E4008 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................15 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Electrical Schematic • = START OF WINDING Recommended Layout DIMENSIONS: *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 65 SDR1005 Series - SMD Power Inductor Soldering Profile Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 600 PCS. PER REEL 66 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Small design of only 9.8 mm maximum ■ Power supplies for: diameter ■ RoHS compliant* • Portable communications equipment • Camcorders • LCD TVs • CD-players • Car radios SDR1006 Series - SMD Power Inductors Electrical Specifications Bourns Part No. SDR1006-1R5ML SDR1006-2R2ML SDR1006-3R3ML SDR1006-3R9ML SDR1006-4R7ML SDR1006-5R6ML SDR1006-6R8ML SDR1006-8R2ML SDR1006-100ML SDR1006-120ML SDR1006-150ML SDR1006-180ML SDR1006-220ML SDR1006-270KL SDR1006-330KL SDR1006-390KL SDR1006-470KL SDR1006-560KL SDR1006-680KL SDR1006-820KL SDR1006-101KL SDR1006-121KL SDR1006-151KL SDR1006-181KL SDR1006-221KL SDR1006-271KL SDR1006-331KL SDR1006-391KL SDR1006-471KL SDR1006-561KL SDR1006-681KL SDR1006-821KL SDR1006-102KL SDR1006-122KL SDR1006-152KL SDR1006-182KL SDR1006-222KL SDR1006-272KL SDR1006-332KL SDR1006-392KL SDR1006-472KL Inductance 1kHz (µH) 1.5 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 35 35 34 34 33 33 33 31 30 30 30 30 25 25 25 20 20 20 15 15 15 15 15 12 12 12 12 12 12 12 12 10 30 31 31 31 31 32 32 32 32 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 105 68 55 48 40 35 32 24 21 20 16 15 13 11 10 9.0 8.0 7.5 7.0 6.0 5.2 5.0 4.5 4.0 3.8 3.5 3.2 3.0 2.5 2.3 2.1 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 0.8 0.018 0.021 0.024 0.027 0.036 0.040 0.044 0.048 0.060 0.070 0.080 0.090 0.10 0.11 0.12 0.14 0.17 0.19 0.22 0.25 0.35 0.40 0.47 0.63 0.73 0.97 1.15 1.30 1.48 1.90 2.25 2.55 3.10 4.20 5.00 6.80 7.60 11.60 13.50 14.80 18.00 6.40 5.40 5.00 4.60 4.00 3.80 3.40 3.00 2.60 2.45 2.25 2.15 1.95 1.75 1.50 1.35 1.25 1.15 1.10 1.00 0.97 0.89 0.78 0.72 0.66 0.57 0.52 0.48 0.42 0.33 0.28 0.24 0.23 0.21 0.19 0.17 0.16 0.14 0.12 0.11 0.10 10.00 10.00 10.00 8.40 7.30 6.40 5.90 5.40 5.10 4.50 4.00 3.80 3.50 3.40 2.90 2.60 2.30 2.10 2.00 1.90 1.70 1.50 1.40 1.30 1.10 1.00 0.85 0.80 0.80 0.66 0.65 0.56 0.53 0.48 0.45 0.38 0.36 0.33 0.30 0.28 0.24 General Specifications Test Frequency ..............................1 KHz Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ...............................Ferrite DR core Wire ...................Enamelled copper wire Terminal.....................................Ag/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................800 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: MM (INCHES) Typical Part Marking *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 67 SDR1006 Series - SMD Power Inductors Materials Packaging Specifications Paper Plastics DIMENSIONS: MM (INCHES) QTY: 800 PCS. PER REEL Strength Of Cover Tape The force for tearing off cover tape is 10 to 130 grams in the arrow direction. 68 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Current rating to 3.0 amps ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ 3.0 mm height ■ Lead free ■ RoHS compliant* SDR1030 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR1030-2R7M SDR1030-4R7M SDR1030-6R8M SDR1030-100M SDR1030-150M SDR1030-220M SDR1030-330M SDR1030-470M SDR1030-680M SDR1030-101K SDR1030-151K SDR1030-221K SDR1030-331K SDR1030-471K SDR1030-681K SDR1030-102K (µH) 2.7 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 13 13 15 15 18 20 16 10 12 14 23 23 25 20 18 42 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 73.6 49.5 38.1 33.1 25.7 22.3 16.4 14.2 12.2 9.3 7.9 6.2 5.1 3.8 3.2 2.5 0.028 0.040 0.052 0.064 0.100 0.145 0.220 0.270 0.360 0.540 0.700 1.150 1.700 2.250 3.300 4.700 3.00 2.60 2.20 2.00 1.65 1.38 1.10 0.96 0.82 0.70 0.60 0.46 0.38 0.28 0.23 0.20 4.20 3.50 2.80 2.40 1.85 1.60 1.25 1.10 0.90 0.75 0.58 0.48 0.40 0.32 0.27 0.23 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ........................................Ferrite DR Wire ............Enamelled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................30 °C max. at rated Irms Packaging ..................1000 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 69 SDR1030 Series - SMD Power Inductors Packaging Specifications QTY: 1000 PCS. PER REEL DIMENSIONS: 70 MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Current rating to 4.8 amps ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Mounting height 4.8 mm maximum ■ Lead free ■ RoHS compliant* SDR1045 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR1045-2R7M SDR1045-4R5M SDR1045-6R8M SDR1045-100M SDR1045-150M SDR1045-220M SDR1045-330M SDR1045-470M SDR1045-680M SDR1045-101K SDR1045-151K SDR1045-221K SDR1045-331K SDR1045-471K SDR1045-681K SDR1045-102K (µH) 2.7 4.5 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 25 25 22 26 26 22 20 21 21 14 16 15 12 12 13 25 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 68.7 44.2 35.8 27.8 23.7 19.4 15.8 13.6 11.1 9.7 7.1 6.4 4.6 4.2 3.6 2.9 0.026 0.033 0.040 0.064 0.100 0.145 0.220 0.270 0.360 0.540 0.700 1.150 1.700 2.250 3.300 4.700 4.80 4.20 3.50 3.20 2.50 2.20 1.90 1.60 1.30 1.10 0.85 0.72 0.62 0.52 0.43 0.38 6.20 5.20 4.20 3.60 3.00 2.60 2.10 1.85 1.50 1.30 1.05 0.85 0.70 0.58 0.46 0.40 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ........................................Ferrite DR Wire ............Enamelled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 71 SDR1045 Series - SMD Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: 72 MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low height of only 4.8 mm ■ Power supplies for: • Portable communications equipment • Camcorders • LCD TVs • CD-players • Car radios ■ High Irms of 4.0 amps ■ RoHS compliant* SDR1105 Series - SMD Power Inductors Electrical Specifications Bourns Part No. Inductance 1kHz (µH) SDR1105-100ML SDR1105-120ML SDR1105-150ML SDR1105-180ML SDR1105-220ML SDR1105-270ML SDR1105-330KL SDR1105-390KL SDR1105-470KL SDR1105-560KL SDR1105-680KL SDR1105-820KL SDR1105-101KL SDR1105-151KL SDR1105-201KL 10 12 15 18 22 27 33 39 47 56 68 82 100 150 200 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 RDC (Ω) I rms Max. (A) I sat Typ. (A) 0.045 0.048 0.052 0.070 0.080 0.090 0.100 0.140 0.170 0.200 0.210 0.300 0.320 0.500 0.650 4.00 3.80 3.50 3.30 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.50 1.20 1.00 8.0 8.0 8.0 7.0 6.5 5.0 5.0 4.5 4.0 3.5 3.5 3.0 2.8 2.3 1.8 General Specifications Test Frequency ..............................1 KHz Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ...............................Ferrite DR core Wire ...................Enamelled copper wire Base.................................................FR-4 Terminal.....................................Cu/Ni/Au Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................800 pcs. per reel Product Dimensions Electrical Schematic Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 800 PCS. PER REEL REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 73 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Current rating to 7.2 amps ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Lead free ■ RoHS compliant* SDR1305 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR1305-2R5Y SDR1305-3R5Y SDR1305-4R6Y SDR1305-6R8Y SDR1305-100M SDR1305-150M SDR1305-220M SDR1305-330M SDR1305-470M SDR1305-680M SDR1305-101K SDR1305-151K SDR1305-221K SDR1305-331K SDR1305-471K SDR1305-681K SDR1305-102K (µH) 2.5 3.5 4.6 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 25 25 25 25 20 20 20 20 20 20 10 10 10 10 10 10 10 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 19 20 18 17 35 28 27 23 24 22 20 17 16 11 14 12 41 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 61 43 35 32 27 24 20 16 13 11 11 8 7 6 4 3.5 2.7 0.0098 0.0105 0.0165 0.0240 0.0370 0.0460 0.0620 0.0850 0.1300 0.1650 0.2550 0.3800 0.5000 0.7000 1.1500 1.4000 2.3500 7.20 6.00 5.20 4.30 3.60 3.30 2.90 2.50 1.90 1.65 1.40 1.20 1.00 0.85 0.67 0.60 0.46 8.00 7.00 6.00 5.20 4.40 3.70 3.00 2.60 2.00 1.80 1.40 1.15 0.95 0.80 0.70 0.58 0.47 General Specifications Test Voltage...................................10 mV Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ........................................Ferrite DR Wire ............Enamelled copper wire 130 Terminal .........................................Cu/Sn Rated Current ....................Ind. drop 25 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 74 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR1305 Series - SMD Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 75 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Small design of only 13 mm maximum ■ Power supplies for: diameter ■ RoHS compliant* • Portable communications equipment • Camcorders • LCD TVs • CD players • Car radios SDR1307 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR1307-1R5ML SDR1307-2R2ML SDR1307-2R7ML SDR1307-3R3ML SDR1307-4R7ML SDR1307-5R6ML SDR1307-6R8ML SDR1307-8R2ML SDR1307-100ML SDR1307-120ML SDR1307-150ML SDR1307-180ML SDR1307-220ML SDR1307-270ML SDR1307-330KL SDR1307-390KL SDR1307-470KL SDR1307-560KL SDR1307-680KL SDR1307-820KL SDR1307-101KL SDR1307-121KL SDR1307-151KL SDR1307-181KL SDR1307-221KL SDR1307-271KL SDR1307-331KL SDR1307-391KL SDR1307-471KL SDR1307-561KL SDR1307-681KL SDR1307-821KL SDR1307-102KL (µH) 1.5 2.2 2.7 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 20 22 24 26 25 24 24 24 22 25 28 28 40 35 35 28 24 22 24 18 25 20 20 18 15 15 15 12 12 10 10 10 10 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 65.0 50.0 40.0 38.0 36.0 28.0 26.0 24.0 22.0 20.0 17.0 16.0 15.0 11.0 10.0 9.0 7.5 7.2 7.0 6.0 5.8 5.5 4.5 4.0 3.8 3.5 3.2 2.5 2.2 2.0 1.6 1.5 1.4 5.0 6.0 8.0 8.7 10.0 15.0 17.0 19.0 21.0 30.0 34.0 36.0 47.0 60.0 65.0 75.0 82.0 95.0 120.0 140.0 180.0 210.0 250.0 280.0 360.0 410.0 520.0 600.0 720.0 880.0 1000.0 1300.0 1600.0 9.50 9.00 8.20 7.50 7.00 6.50 6.00 5.80 5.60 4.80 4.50 4.20 3.60 3.30 3.10 2.90 2.70 2.50 2.30 2.10 1.90 1.80 1.60 1.50 1.30 1.20 1.10 1.00 0.90 0.85 0.80 0.75 0.65 20.00 18.00 16.00 15.00 13.00 11.00 10.50 9.80 9.20 8.00 7.50 7.00 6.50 5.50 5.00 4.60 4.20 3.80 3.50 3.20 3.00 2.80 2.60 2.30 2.10 1.80 1.60 1.50 1.40 1.30 1.20 1.10 1.00 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature ..-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ...............................Ferrite DR core Wire ...................Enamelled copper wire Terminal.....................................Ag/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................400 pcs. per reel Product Dimensions Recommended Layout Electrical Schematic DIMENSIONS: MM (INCHES) Typical Part Marking 76 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR1307 Series - SMD Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 400 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 77 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low profile of only 6.6 mm ■ Power supplies for: • Portable communications equipment • Camcorders • LCD TVs • Car radios ■ Inductance as low as 1 µH ■ RoHS compliant* SDR1806 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR1806-1R0ML SDR1806-2R2ML SDR1806-3R3ML SDR1806-5R6ML SDR1806-100ML SDR1806-150ML SDR1806-220ML SDR1806-330ML SDR1806-470ML SDR1806-680ML SDR1806-101KL SDR1806-151KL SDR1806-221KL SDR1806-331KL SDR1806-471KL SDR1806-681KL SDR1806-102KL (µH) 1 2.2 3.3 5.6 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Typ. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 21 22 22 23 22 20 22 24 22 22 25 23 20 18 15 12 10 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 100.0 55.0 40.0 30.0 25.0 17.0 13.0 11.0 9.0 8.0 7.0 5.0 4.5 3.5 3.0 2.5 2.0 4.0 6.8 9.8 15.0 25.0 35.0 45.0 68.0 95.0 130.0 190.0 270.0 420.0 580.0 820.0 1200.0 1800.0 10.0 9.00 7.60 6.40 5.30 4.30 3.60 3.00 2.50 2.10 1.70 1.40 1.10 1.00 0.80 0.70 0.50 30.00 22.00 17.00 12.80 10.00 8.00 6.70 5.40 4.60 3.80 3.20 2.60 2.20 1.80 1.50 1.20 1.00 General Specifications Test Voltage.....................................0.1 V Reflow soldering.....230 °C, 10 sec max. Operating Temperature ..-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core.........................................Ferrite DR Wire .............................Enameled copper Base ......................................LCP E4008 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging.....................250 pcs. per reel Product Dimensions Electrical Schematic • = START OF WINDING Recommended Layout DIMENSIONS: 78 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR1806 Series - SMD Power Inductor Soldering Profile Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 250 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 79 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low height of only 7.0 mm ■ Power supplies for: • Portable communications equipment • Camcorders • LCD TVs • Car radios ■ Inductance as low as 0.8 µH ■ High current up to 16 amps ■ RoHS compliant* SDR2207 Series - SMD Power Inductors Electrical Specifications Bourns Part No. SDR2207-R80ML SDR2207-1R2ML SDR2207-1R8ML SDR2207-2R7ML SDR2207-3R3ML SDR2207-4R7ML SDR2207-5R6ML SDR2207-6R8ML SDR2207-8R2ML SDR2207-100ML SDR2207-120YL SDR2207-150YL SDR2207-180YL SDR2207-220YL SDR2207-270YL SDR2207-330YL SDR2207-390KL SDR2207-470KL SDR2207-560KL SDR2207-680KL SDR2207-820KL SDR2207-101KL SDR2207-121KL SDR2207-151KL SDR2207-181KL SDR2207-221KL SDR2207-271KL SDR2207-331KL SDR2207-391KL SDR2207-471KL SDR2207-561KL SDR2207-681KL SDR2207-821KL SDR2207-102KL Inductance 100 KHz (µH) 0.8 1.2 1.8 2.7 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 30 30 31 38 38 38 50 38 35 53 50 38 46 27 22 27 18 27 25 18 28 18 20 22 20 19 17 20 17 19 18 16 16 15 5 3 3 3 3 3 3 3 3 5 5 5 5 3 3 3 3 3 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 102.0 70.0 51.0 51.0 39.0 33.0 30.0 27.0 25.0 20.0 19.0 16.0 15.0 14.0 12.0 11.0 10.0 9.0 8.3 7.9 6.5 6.2 6.0 5.8 5.7 5.5 5.3 5.1 4.9 4.7 4.5 4.2 3.9 3.5 2.8 3.8 4.5 7.0 7.8 8.8 13.4 14.2 15.5 17.2 23.6 28.8 33.0 39.4 43.5 58.4 65.0 91.2 96.5 112.0 144.0 168.0 230.0 250.0 300.0 380.0 470.0 560.0 680.0 850.0 1000 1100 1400 1800 16.0 15.0 13.0 10.0 9.0 8.5 7.8 7.5 7.0 6.5 5.5 5.0 4.6 4.0 3.8 3.4 3.2 2.8 2.6 2.4 2.3 2.2 1.6 1.5 1.3 1.2 1.1 1.0 0.9 0.8 0.8 0.7 0.6 0.6 35.0 30.0 25.0 20.0 17.0 15.0 14.0 12.0 11.0 10.0 9.5 9.0 8.0 6.5 6.0 5.5 5.2 5.0 4.5 4.0 3.5 3.0 3.0 2.6 2.5 2.4 2.2 1.9 1.7 1.4 1.3 1.2 1.1 1.0 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C; 10 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature .................................-40 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core.........................................Ferrite DR Wire .............................Enameled copper Terminal ........................................Cu/Sn Base................................Phenolic T375J Adhesive ..............................Epoxy resin Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging ....................250 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 80 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR2207 Series - SMD Power Inductors Soldering Profile Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 250 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 81 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Range from 1.0 µH to 1000 µH ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Lead free PostScript Picture sdr7030.eps ■ RoHS compliant* SDR7030 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR7030-1R0M SDR7030-1R5M SDR7030-2R2M SDR7030-3R5M SDR7030-4R7M SDR7030-6R2M SDR7030-100M SDR7030-150M SDR7030-220M SDR7030-330M SDR7030-470K SDR7030-680K SDR7030-101K SDR7030-151K SDR7030-221K SDR7030-331K SDR7030-471K SDR7030-681K SDR7030-102K (µH) 1.0 1.5 2.2 3.5 4.7 6.2 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 18 17 17 17 14 17 16 14 14 13 12 12 18 18 23 24 30 28 66 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 113 100 80 59 43 41 35 33 32 24 18 16 15 12 9 7 6 5 4 0.022 0.027 0.030 0.038 0.048 0.058 0.075 0.115 0.160 0.230 0.340 0.480 0.720 0.920 1.600 2.200 2.800 4.350 6.200 3.00 2.75 2.60 2.20 1.85 1.65 1.50 1.20 1.02 0.85 0.70 0.58 0.46 0.40 0.32 0.26 0.22 0.18 0.15 4.30 3.60 3.20 2.60 2.25 2.00 1.60 1.30 1.10 0.90 0.78 0.64 0.52 0.42 0.34 0.28 0.23 0.18 0.15 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ........................................Ferrite DR Wire .............Enameled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................30 °C max. at rated Irms Packaging ..................1500 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 82 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR7030 Series - SMD Power Inductors Packaging Specifications QTY: 1500 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 83 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Current rating to 3.8 amps ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Lead free ■ RoHS compliant* PostScript Picture sdr7045.eps SDR7045 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SDR7045-1R2M SDR7045-1R5M SDR7045-2R2M SDR7045-3R3M SDR7045-4R7M SDR7045-6R8M SDR7045-100M SDR7045-150M SDR7045-220M SDR7045-330M SDR7045-470K SDR7045-680K SDR7045-101K SDR7045-151K SDR7045-221K SDR7045-331K SDR7045-471K SDR7045-681K SDR7045-102K (µH) 1.2 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 25 26 24 23 23 22 28 24 26 20 21 17 17 17 22 20 20 18 48 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 90 109 79 47 38 35 23 19 18 18 11 11 10 8 6 6 4 4 3 0.022 0.027 0.032 0.036 0.042 0.054 0.070 0.086 0.125 0.150 0.230 0.280 0.430 0.580 0.930 1.240 1.850 2.400 4.000 3.80 3.50 3.30 2.80 2.60 2.25 2.00 1.60 1.40 1.22 1.00 0.90 0.75 0.62 0.50 0.42 0.34 0.30 0.22 5.00 4.50 4.00 3.70 3.40 2.70 2.30 1.90 1.62 1.32 1.10 0.92 0.72 0.58 0.48 0.40 0.30 0.26 0.20 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ........................................Ferrite DR Wire .............Enameled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ..................1000 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 84 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR7045 Series - SMD Power Inductors Packaging Specifications QTY: 1000 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 85 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low unit height of 3.3 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current ■ RoHS compliant* SRR0603 Series - Shielded Power Inductors Electrical Specifications Bourns Part No. SRR0603-1R5ML SRR0603-2R5ML SRR0603-3R3ML SRR0603-4R7ML SRR0603-6R8ML SRR0603-100ML SRR0603-150ML SRR0603-220ML SRR0603-330KL SRR0603-470KL SRR0603-680KL SRR0603-101KL SRR0603-151KL SRR0603-221KL SRR0603-331KL SRR0603-471KL SRR0603-681KL SRR0603-102KL Inductance 1kHz (µH) 1.5 2.5 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 15 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 20 19 16 13 13 16 16 16 15 13 11 22 22 20 18 17 13 20 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 95.0 90.0 85.0 45.0 32.0 25.0 25.0 20.0 16.0 13.0 10.0 9.0 8.0 5.0 4.5 4.0 3.5 3.0 0.032 0.040 0.055 0.070 0.100 0.12 0.18 0.27 0.43 0.55 0.90 1.50 1.90 2.70 4.20 6.70 10.50 14.00 2.20 2.00 1.80 1.60 1.20 1.10 0.90 0.70 0.60 0.50 0.40 0.30 0.25 0.20 0.18 0.15 0.12 0.10 3.50 2.95 2.60 2.20 1.75 1.50 1.20 1.05 0.83 0.73 0.53 0.44 0.39 0.31 0.24 0.19 0.15 0.13 General Specifications Test Voltage ....................................1 Volt Reflow Soldering .....230 ˚C; 50 sec max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core Material...................Ferrite DR & RI Wire ............................Enameled Copper Base ......................................LCP E4008 Terminal.....................................Cu/Ni/Sn Rated Current ...Ind. drop 10 % typ at I sat Temperature Rise .40 ˚C max at rated I rms Packaging...................1000 pcs. per reel Product Dimensions Electrical Schematic Recommended Layout DIMENSIONS: 86 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0603 Series - Shielded Power Inductors Packaging Specifications QTY: 1000 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 87 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low unit height of 4.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current ■ RoHS compliant* SRR0604 Series - Shielded Power Inductors Electrical Specifications Bourns Part No. SRR0604-1R5ML SRR0604-2R5ML SRR0604-3R3ML SRR0604-4R7ML SRR0604-6R8ML SRR0604-100ML SRR0604-150ML SRR0604-220ML SRR0604-330KL SRR0604-470KL SRR0604-680KL SRR0604-101KL SRR0604-151KL SRR0604-221KL SRR0604-331KL SRR0604-471KL SRR0604-681KL SRR0604-102KL Inductance 1kHz (µH) 1.5 2.5 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 23 21 21 10 20 18 18 16 16 15 15 23 21 20 18 18 16 15 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 110.0 100.0 90.0 50.0 37.0 30.0 30.0 25.0 21.0 18.0 15.0 13.0 12.0 10.0 7.0 6.5 6.0 5.5 0.028 0.035 0.050 0.060 0.070 0.12 0.13 0.19 0.25 0.35 0.52 0.65 1.00 1.70 2.10 3.30 4.80 6.10 2.80 2.50 2.30 2.00 1.60 1.30 1.10 0.90 0.70 0.60 0.50 0.40 0.30 0.25 0.20 0.18 0.15 0.12 3.95 3.50 2.90 2.55 2.05 1.80 1.45 1.20 0.95 0.80 0.68 0.57 0.47 0.32 0.28 0.22 0.19 0.15 General Specifications Test Voltage ....................................1 Volt Reflow Soldering .....230 ˚C; 50 sec max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core Material...................Ferrite DR & RI Wire ............................Enameled Copper Base ......................................LCP E4008 Terminal.....................................Cu/Ni/Sn Rated Current ..Ind. drop 10 % typ at I sat Temperature Rise ..40 ˚C max at rated I rms Packaging...................1000 pcs. per reel Product Dimensions Electrical Schematic Recommended Layout DIMENSIONS: 88 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0604 Series - Shielded Power Inductors Packaging Specifications QTY: 1000 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 89 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low unit height of 1.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current ■ RoHS compliant* SRR0618 Series - Shielded Power Inductors Electrical Specifications Inductance 100kHz Bourns Part No. SRR0618-2R2ML SRR0618-3R3ML SRR0618-4R7ML SRR0618-6R8ML SRR0618-100ML SRR0618-150ML SRR0618-220ML SRR0618-330ML SRR0618-470ML SRR0618-680ML SRR0618-101ML (µH) 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Tol. % ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 Recommended Layout DIMENSIONS: Q Ref. Test Frequency (kHz) SRF Nom. (MHz) RDC Max. (Ω) I rms Typ. (A) I sat Typ. (A) 30 30 30 30 30 30 30 30 30 30 30 100 100 100 100 100 100 100 100 100 100 100 95 70 65 50 45 35 25 22 20 15 13 0.05 0.07 0.10 0.15 0.22 0.31 0.46 0.68 1.10 1.50 2.30 1.70 1.40 1.05 0.95 0.82 0.60 0.47 0.43 0.36 0.30 0.23 2.10 1.75 1.45 1.18 0.98 0.76 0.60 0.53 0.44 0.37 0.27 General Specifications Test Voltage .................................0.1 Volt Reflow Soldering .....230 ˚C, 50 sec max. Operating Temperature ..-40 °C to +125 °C (Temperature rise included) Storage Temperature....-25 °C to +85 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core Material...........................Ferrite DR Wire ............................Enameled Copper Base .....................................Ferrite Core Terminal.....................................Cu/Ni/Sn Rated Current ...Ind. drop 50 % typ at I sat Temperature Rise .40 ˚C max at rated I rms Packaging.....................800 pcs. per reel Product Dimensions MM (INCHES) Electrical Schematic 90 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0618 Series - Shielded Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 800 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 91 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low profile - 3.8 mm unit height ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current ■ Lead free ■ RoHS compliant* SRR0804 Series - Shielded Power Inductors Electrical Specifications Bourns Part No. SRR0804 - 5R0M SRR0804 - 7R5M SRR0804 - 100M SRR0804 - 120M SRR0804 - 150M SRR0804 - 180Y SRR0804 - 220Y SRR0804 - 270Y SRR0804 - 330Y SRR0804 - 390Y SRR0804 - 470K SRR0804 - 560K SRR0804 - 680K SRR0804 - 820K SRR0804 - 101K SRR0804 - 121K SRR0804 - 151K SRR0804 - 181K SRR0804 - 221K SRR0804 - 271K SRR0804 - 331K SRR0804 - 391K SRR0804 - 471K Inductance 1kHz (µH) 5.0 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 Tol. % ± 20 ± 20 ± 20 ± 20 ± 20 ± 15 ± 15 ± 15 ± 15 ± 15 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Q Ref. 20 20 38 38 38 35 30 28 26 26 24 24 22 20 50 50 53 53 55 50 60 55 60 Test Frequency (MHz) 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M SRF Min. (MHz) 45.0 40.0 32.0 28.0 25.0 23.0 22.0 18.0 17.0 16.0 14.0 12.0 11.0 10.0 9.0 8.5 7.0 6.0 5.5 5.5 5.0 4.5 4.0 RDC (Ω) 0.08 0.10 0.12 0.15 0.17 0.19 0.25 0.27 0.30 0.38 0.46 0.60 0.70 0.80 0.95 1.00 1.30 1.45 1.90 2.15 2.80 3.30 3.60 I rms Max. (A) 1.70 1.40 1.20 1.10 1.00 0.90 0.80 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.37 0.35 0.30 0.28 0.24 0.22 0.19 0.17 0.16 I sat Typ. (A) 2.80 2.60 2.20 1.90 1.60 1.50 1.30 1.30 1.10 1.00 0.95 0.85 0.80 0.73 0.65 0.55 0.50 0.45 0.40 0.35 0.32 0.30 0.28 General Specifications Test Voltage........................................1 V Reflow soldering.....230 °C; 10 sec max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core ...................................Ferrite DR&RI Wire ............................Enamelled copper Base ......................................LCP E4008 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging...................1000 pcs. per reel Product Dimensions Soldering Profile DIMENSIONS: MM (INCHES) Recommended Layout 92 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0804 Series - Shielded Power Inductors Packaging Specifications QTY: 1000 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 93 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low profile - 4.7 mm unit height ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current ■ Lead free ■ RoHS compliant* SRR0805 Series - Shielded Power Inductor Electrical Specifications Bourns Part No. SRR0805 - 2R2M SRR0805 - 3R9M SRR0805 - 5R6M SRR0805 - 8R2M SRR0805 - 100M SRR0805 - 120M SRR0805 - 150M SRR0805 - 180Y SRR0805 - 220Y SRR0805 - 270Y SRR0805 - 330Y SRR0805 - 390Y SRR0805 - 470Y SRR0805 - 560K SRR0805 - 680K SRR0805 - 820K SRR0805 - 101K SRR0805 - 121K SRR0805 - 151K SRR0805 - 181K SRR0805 - 221K SRR0805 - 271K SRR0805 - 331K SRR0805 - 391K SRR0805 - 471K SRR0805 - 561K SRR0805 - 681K SRR0805 - 821K SRR0805 - 102K Inductance 1kHz (µH) 2.2 3.9 5.6 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tol. % ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 15 ± 15 ± 15 ± 15 ± 15 ± 15 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Q Ref. 18 20 20 19 40 40 40 40 38 35 40 35 32 30 28 28 45 42 39 41 38 37 36 35 34 32 32 35 35 Test Frequency (MHz) 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.252M SRF Min. (MHz) 75.0 50.0 40.0 32.0 28.0 24.0 22.0 19.0 19.0 15.5 13.5 12.0 10.5 9.5 9.0 8.5 7.5 7.0 6.5 4.8 4.5 4.2 3.8 3.6 3.5 3.0 2.8 2.5 2.2 RDC (Ω) 0.040 0.055 0.065 0.080 0.100 0.120 0.140 0.160 0.180 0.200 0.240 0.260 0.280 0.380 0.440 0.550 0.600 0.750 0.90 1.05 1.18 1.40 1.80 2.10 2.25 3.00 3.40 4.00 5.00 I rms Max. (A) 2.50 2.10 1.95 1.75 1.50 1.40 1.30 1.20 1.10 1.00 0.92 0.84 0.75 0.68 0.60 0.54 0.50 0.45 0.40 0.35 0.30 0.27 0.24 0.22 0.20 0.18 0.17 0.16 0.15 I sat Typ. (A) 4.90 3.70 3.20 2.50 2.20 2.10 1.80 1.70 1.50 1.40 1.20 1.10 1.00 0.95 0.90 0.74 0.70 0.66 0.64 0.62 0.55 0.45 0.38 0.36 0.35 0.34 0.32 0.29 0.24 General Specifications Test Voltage ........................................1 V Reflow soldering.....230 °C; 10 sec max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core ...................................Ferrite DR&RI Wire .............................Enameled copper Base ......................................LCP E4008 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging...................1000 pcs. per reel Product Dimensions Soldering Profile DIMENSIONS: MM (INCHES) Recommended Layout 94 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0805 Series - Shielded Power Inductor Packaging Specifications QTY: 1000 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DIMENSIONS: MM (INCHES) 95 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ High inductance up to 10 mH ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Low 6.0 mm profile ■ Gull wing leads ■ RoHS compliant* SRR0906 Series - SMD Shielded Power Inductors Electrical Specifications Bourns Part No. SRR0906-2R7ML SRR0906-3R5ML SRR0906-4R7ML SRR0906-5R6ML SRR0906-6R8ML SRR0906-8R2ML SRR0906-100ML SRR0906-120ML SRR0906-150ML SRR0906-180ML SRR0906-220ML SRR0906-270ML SRR0906-330ML SRR0906-390ML SRR0906-470ML SRR0906-560ML SRR0906-680ML SRR0906-820ML SRR0906-101YL SRR0906-121YL SRR0906-151YL SRR0906-181YL SRR0906-221YL SRR0906-271YL SRR0906-331YL SRR0906-391YL SRR0906-471YL SRR0906-561YL SRR0906-681YL SRR0906-821YL SRR0906-102YL SRR0906-122YL SRR0906-152YL SRR0906-182YL SRR0906-222YL SRR0906-272YL SRR0906-332YL SRR0906-392YL SRR0906-472YL SRR0906-562YL SRR0906-682YL SRR0906-822YL SRR0906-103YL Inductance 1kHz (µH) Tol. % Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 2.7 3.5 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 23 23 23 23 23 23 35 35 35 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 60 60 85 100 100 100 100 100 100 100 100 100 100 100 100 100 7.96M 7.96M 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.0796M 85.0 80.0 40.0 57.0 38.0 30.0 29.0 26.0 23.0 22.0 19.0 17.0 15.0 14.0 12.0 12.0 9.0 8.0 7.5 7.0 6.0 5.5 5.0 5.0 4.5 4.2 4.0 3.2 2.7 2.6 2.3 2.3 2.0 1.7 1.5 1.4 1.3 1.2 1.0 0.9 0.9 0.8 0.7 0.032 0.036 0.040 0.046 0.050 0.055 0.080 0.085 0.100 0.110 0.130 0.140 0.150 0.160 0.180 0.300 0.350 0.370 0.420 0.480 0.550 0.820 1.000 1.100 1.300 1.400 1.600 2.700 3.200 3.500 4.000 4.400 5.200 7.000 8.500 9.200 11.000 16.000 19.000 21.000 24.000 31.000 38.000 3.20 2.90 2.70 2.50 2.30 2.10 1.80 1.70 1.60 1.50 1.40 1.30 1.20 1.10 1.00 0.93 0.85 0.78 0.70 0.65 0.60 0.52 0.48 0.44 0.40 0.38 0.35 0.28 0.25 0.23 0.22 0.20 0.18 0.17 0.16 0.14 0.12 0.11 0.10 0.09 0.09 0.08 0.07 5.80 5.20 4.30 4.20 3.40 3.20 2.70 2.60 2.40 2.00 1.90 1.80 1.60 1.40 1.30 1.20 1.00 0.90 0.90 0.75 0.70 0.70 0.60 0.55 0.51 0.50 0.40 0.35 0.33 0.30 0.26 0.24 0.22 0.20 0.18 0.17 0.15 0.13 0.11 0.11 0.10 0.09 0.08 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base..................................................LCP Terminal ....................................Cu/Ni/Sn Adhesive ..............................Epoxy resin Rated Current .Ind. drop 10 % typ. at Isat Temperature Rise .........................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Recommended Layout Multiple windings possible (up to four windings). Electrical Schematic DIMENSIONS: 96 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0906 Series - Shielded Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 600 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 97 Features Applications ■ Available in E6 series, E12 series optional ■ Input/output of DC/DC converters ■ High inductance up to 15 mH ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current up to 5.6 A ■ Gull wing leads ■ RoHS compliant* SRR0908 Series - SMD Shielded Power Inductors Electrical Specifications Bourns Part No. SRR0908-1R5ML SRR0908-2R7ML SRR0908-3R9ML SRR0908-5R6ML SRR0908-7R5ML SRR0908-100ML SRR0908-120ML SRR0908-150ML SRR0908-180ML SRR0908-220ML SRR0908-270ML SRR0908-330ML SRR0908-390ML SRR0908-470ML SRR0908-560ML SRR0908-680ML SRR0908-820ML SRR0908-101YL SRR0908-121YL SRR0908-151YL SRR0908-181YL SRR0908-221YL SRR0908-271YL SRR0908-331YL SRR0908-391YL SRR0908-471YL SRR0908-561YL SRR0908-681YL SRR0908-821YL SRR0908-102YL SRR0908-152YL SRR0908-222YL SRR0908-332YL SRR0908-472YL SRR0908-682YL SRR0908-822YL SRR0908-103YL SRR0908-153YL Inductance 1 kHz (µH) 1.5 2.7 3.9 5.6 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1500 2200 3300 4700 6800 8200 10000 15000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (ohms) I rms Max. (A) I sat Typ. (A) 20 20 20 18 18 33 40 45 40 35 45 40 45 40 35 30 30 40 42 45 35 35 30 30 33 30 35 30 35 85 120 95 95 90 90 85 110 130 7.96M 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.0796M 0.0796M 65.0 50.0 35.0 25.0 15.0 11.0 11.0 8.50 8.50 6.00 6.00 5.00 5.00 4.00 3.00 2.50 2.40 6.00 5.70 4.60 4.20 3.80 3.40 3.00 2.60 2.30 2.20 2.00 1.90 1.80 1.30 1.00 0.90 0.80 0.60 0.50 0.50 0.40 0.014 0.019 0.021 0.028 0.032 0.040 0.050 0.050 0.075 0.080 0.090 0.10 0.14 0.15 0.17 0.18 0.26 0.28 0.34 0.45 0.50 0.60 0.70 0.80 1.00 1.15 1.50 1.70 2.20 2.50 4.00 5.00 8.00 12.00 16.50 24.00 26.00 40.00 5.60 4.80 4.40 3.80 3.40 3.00 2.50 2.20 2.00 1.90 1.80 1.70 1.50 1.40 1.35 1.25 1.05 1.00 0.90 0.80 0.70 0.65 0.60 0.55 0.50 0.45 0.38 0.35 0.32 0.30 0.25 0.20 0.15 0.12 0.10 0.10 0.09 0.08 10.00 7.70 6.60 5.50 4.60 4.10 4.00 3.90 3.80 3.30 2.90 2.70 2.40 2.30 2.10 1.90 1.90 1.30 1.10 1.00 1.00 0.95 0.75 0.70 0.65 0.62 0.55 0.50 0.45 0.41 0.35 0.29 0.24 0.19 0.16 0.14 0.13 0.12 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base..................................................LCP Terminal ....................................Cu/Ni/Sn Adhesive ..............................Epoxy resin Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................400 pcs. per reel Product Dimensions Multiple windings possible (up to four windings). Recommended Layout SRR0908-101Y to 153Y SRR0908-1R5M to 820M DIMENSIONS: 98 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0908 Series - SMD Shielded Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 400 PCS. PER REEL Electrical Schematic SRR0908-1R5M to 820M REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0908-101Y to 153Y 99 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low profile of 3 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current ■ Lead free ■ RoHS compliant* SRR1003 Series - Shielded Power Inductors Electrical Specifications Bourns Part No. SRR1003-1R8M SRR1003-2R2M SRR1003-3R0M SRR1003-3R9M SRR1003-4R7M SRR1003-7R5M SRR1003-100M SRR1003-120M SRR1003-150M SRR1003-180M SRR1003-220M SRR1003-270M SRR1003-330M SRR1003-390M SRR1003-470M SRR1003-560M SRR1003-680M SRR1003-820M SRR1003-101M SRR1003-121M SRR1003-151M SRR1003-181M SRR1003-221M SRR1003-271Y SRR1003-331Y SRR1003-391Y SRR1003-471Y Inductance 1kHz (µH) 1.8 2.2 3.0 3.9 4.7 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 10 11 11 10 10 10 18 20 20 20 17 17 17 18 18 15 15 20 23 22 23 20 20 26 26 28 28 7.96M 7.96M 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 100.0 90.0 70.0 60.0 50.0 32.0 28.0 26.0 25.0 14.0 22.0 19.0 17.0 16.0 14.0 13.0 11.0 11.0 10.0 9.0 8.0 7.0 6.0 4.1 3.6 2.6 2.1 0.03 0.045 0.062 0.07 0.08 0.10 0.15 0.19 0.20 0.27 0.30 0.40 0.45 0.56 0.65 0.68 0.80 1.20 1.40 1.52 1.80 2.20 2.20 3.10 3.60 4.60 5.10 3.00 2.76 2.20 2.10 1.90 1.44 1.24 1.10 1.02 0.90 0.85 0.75 0.70 0.65 0.60 0.52 0.48 0.42 0.40 0.35 0.32 0.28 0.26 0.22 0.20 0.18 0.16 8.00 6.70 5.60 5.20 4.60 3.90 3.30 3.00 2.60 2.50 2.10 1.90 1.70 1.60 1.40 1.30 1.20 1.00 0.95 0.85 0.80 0.75 0.65 0.60 0.55 0.46 0.45 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 10 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging...................1000 pcs. per reel Product Dimensions Soldering Profile Recommended Layout DIMENSIONS: 100 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1003 Series - Shielded Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 1000 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 101 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Unit height of 5.2 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 4.5 A ■ Lead free ■ RoHS compliant* SRR1005 Series - Shielded Power Inductors Electrical Specifications Bourns Part No. SRR1005-1R0M SRR1005-1R5M SRR1005-2R2M SRR1005-3R0M SRR1005-4R7M SRR1005-7R0M SRR1005-100M SRR1005-120M SRR1005-150M SRR1005-180Y SRR1005-220Y SRR1005-270Y SRR1005-330Y SRR1005-390Y SRR1005-470Y SRR1005-560Y SRR1005-680Y SRR1005-820Y SRR1005-101K SRR1005-121K SRR1005-151K SRR1005-181K SRR1005-221K SRR1005-271K SRR1005-331K SRR1005-391K SRR1005-471K SRR1005-561K SRR1005-681K SRR1005-821K SRR1005-102K SRR1005-122K SRR1005-152K SRR1005-182K SRR1005-222K SRR1005-272K SRR1005-332K Inductance 1kHz (µH) 1.0 1.5 2.2 3.0 4.7 7.0 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 15 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 25 25 25 25 25 22 48 45 40 35 42 40 40 40 35 35 35 35 35 30 28 28 30 30 30 25 40 40 37 37 65 58 53 65 55 55 50 7.96M 7.96M 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 120 100 90.0 80.0 50.0 32.0 30.0 25.0 20.0 19.0 18.0 17.0 15.0 13.0 12.0 11.0 9.0 8.0 7.5 7.2 6.2 5.8 5.2 4.8 4.5 4.2 3.0 2.7 2.6 2.5 2.0 2.0 1.6 1.4 1.4 1.2 1.2 0.017 0.020 0.027 0.030 0.040 0.055 0.065 0.080 0.085 0.090 0.100 0.120 0.160 0.180 0.190 0.210 0.340 0.380 0.420 0.460 0.520 0.700 0.800 1.100 1.200 1.400 1.600 1.800 2.300 2.600 3.200 3.600 5.200 5.700 6.500 8.600 10.00 4.50 3.60 3.10 2.90 2.50 2.20 2.00 1.80 1.70 1.60 1.40 1.30 1.20 1.05 1.00 0.90 0.82 0.75 0.68 0.60 0.55 0.50 0.45 0.40 0.35 0.33 0.30 0.28 0.26 0.24 0.22 0.20 0.17 0.16 0.14 0.12 0.10 8.00 7.00 6.10 5.00 3.80 3.20 3.00 2.30 2.10 2.10 1.90 1.60 1.56 1.40 1.30 1.10 1.10 0.95 0.90 0.80 0.66 0.65 0.63 0.52 0.48 0.45 0.45 0.42 0.38 0.36 0.32 0.29 0.24 0.23 0.21 0.18 0.17 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 10 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 102 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1005 Series - Shielded Power Inductors Soldering Profile Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 600 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 103 Features Applications ■ E6 series optional ■ Input/output of DC/DC converters ■ Unit height of 5.5 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 5 A ■ J-hook leads ■ RoHS compliant* SRR1205 Series - Shielded High Power Inductors Electrical Specifications Bourns Part No. SRR1205-2R5ML SRR1205-3R3ML SRR1205-5R0ML SRR1205-7R5ML SRR1205-100ML SRR1205-120ML SRR1205-150ML SRR1205-180ML SRR1205-220ML SRR1205-270ML SRR1205-330ML SRR1205-390ML SRR1205-500YL SRR1205-560YL SRR1205-680YL SRR1205-750YL SRR1205-101KL SRR1205-121KL SRR1205-151KL SRR1205-181KL SRR1205-221KL SRR1205-271KL SRR1205-331KL SRR1205-391KL SRR1205-471KL SRR1205-561KL SRR1205-681KL SRR1205-821KL Inductance 1kHz (µH) 2.5 3.3 5.0 7.5 10 12 15 18 22 27 33 39 50 56 68 75 100 120 150 180 220 270 330 390 470 560 680 820 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 18 20 20 20 21 20 20 20 19 18 18 18 18 18 17 17 12 10 10 9 9 9 7 7 7 6 6 5 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 27.0 25.0 21.0 17.0 15.0 13.0 11.0 10.0 9.0 8.0 8.0 7.5 7.0 7.0 6.5 6.0 5.0 4.5 4.0 3.5 3.0 2.5 2.0 2.0 2.0 1.5 1.5 1.0 24 30 35 40 54 65 70 82 95 120 145 160 200 240 280 330 400 500 580 750 840 1000 1340 1500 1980 2200 2400 3000 5.00 4.50 4.00 3.50 3.00 2.80 2.70 2.60 2.40 2.00 1.80 1.65 1.50 1.40 1.30 1.20 1.00 0.90 0.80 0.70 0.65 0.60 0.54 0.50 0.45 0.40 0.35 0.30 10.00 9.20 8.20 7.80 6.00 5.60 5.30 4.80 4.60 4.00 3.50 3.20 2.80 2.50 2.40 2.20 2.00 1.60 1.50 1.40 1.30 1.00 0.88 0.80 0.72 0.65 0.60 0.57 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 104 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1205 Series - Shielded High Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 105 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Unit height of 6.5 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 6 A ■ RoHS compliant* SRR1206 Series - Shielded High Power Inductors Electrical Specifications Bourns Part No. SRR1206-2R5ML SRR1206-5R0ML SRR1206-7R5ML SRR1206-100ML SRR1206-120ML SRR1206-150ML SRR1206-180ML SRR1206-220ML SRR1206-270ML SRR1206-330YL SRR1206-390YL SRR1206-470YL SRR1206-560YL SRR1206-680YL SRR1206-820YL SRR1206-101YL SRR1206-121YL SRR1206-151KL SRR1206-181KL SRR1206-221KL SRR1206-271KL SRR1206-331KL SRR1206-391KL SRR1206-471KL SRR1206-561KL SRR1206-681KL SRR1206-821KL SRR1206-102KL SRR1206-122KL SRR1206-152KL Inductance 1kHz (µH) 2.5 5.0 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 19 21 22 18 18 19 19 21 21 21 23 22 21 18 16 13 13 13 12 11 11 11 13 12 13 11 10 10 10 10 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.252M 0.252M 0.252M 30.0 25.0 22.0 18.0 17.0 16.0 14.0 11.0 10.0 9.0 9.0 7.0 7.0 7.0 6.0 6.0 5.0 5.0 4.5 4.0 3.5 3.0 2.5 2.5 2.0 2.0 2.0 1.8 1.5 1.2 16 22 25 35 38 42 50 62 68 90 100 130 155 170 185 220 260 320 330 460 520 660 870 970 1320 1500 1700 2300 2650 3500 6.20 4.70 3.80 3.30 3.00 2.80 2.50 2.30 2.00 1.90 1.75 1.60 1.45 1.30 1.20 1.10 1.00 0.90 0.80 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 10.00 8.30 6.90 5.70 5.50 5.10 4.70 3.80 3.70 3.10 3.00 2.50 2.50 2.20 2.10 1.90 1.80 1.60 1.30 1.20 1.10 1.00 0.95 0.83 0.80 0.70 0.65 0.54 0.51 0.42 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Cu/Ni/Sn Rated Current..Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Electrical Schematic Recommended Layout DIMENSIONS: 106 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1206 Series - Shielded High Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 107 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 8.5 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 7.5 A ■ RoHS compliant* SRR1208 Series - Shielded High Power Inductors Electrical Specifications Bourns Part No. SRR1208-2R5ML SRR1208-4R5ML SRR1208-6R5ML SRR1208-100ML SRR1208-120ML SRR1208-150ML SRR1208-180ML SRR1208-220ML SRR1208-270ML SRR1208-330YL SRR1208-390YL SRR1208-470YL SRR1208-560YL SRR1208-680YL SRR1208-820YL SRR1208-101YL SRR1208-121YL SRR1208-151YL SRR1208-181YL SRR1208-221KL SRR1208-271KL SRR1208-331KL SRR1208-391KL SRR1208-471KL SRR1208-561KL SRR1208-681KL SRR1208-821KL SRR1208-102KL SRR1208-122KL SRR1208-152KL SRR1208-182KL SRR1208-222KL SRR1208-272KL SRR1208-332KL SRR1208-392KL SRR1208-472KL SRR1208-562KL SRR1208-682KL SRR1208-822KL SRR1208-103KL Inductance 1kHz (µH) 2.5 4.5 6.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) 20 24 25 20 19 21 21 23 23 23 25 24 23 20 18 15 15 14 14 13 13 13 14 14 14 13 12 11 10 10 20 20 20 20 20 20 18 18 16 24 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.0796 40.0 35.0 32.0 28.0 27.0 26.0 24.0 21.0 20.0 19.0 18.0 17.0 16.0 15.0 14.0 13.0 13.0 13.0 12.0 12.0 12.0 11.0 11.0 10.0 10.0 9.0 9.0 8.0 8.0 7.0 0.80 0.70 0.60 0.50 0.45 0.42 0.40 0.38 0.35 0.30 0.011 0.014 0.018 0.021 0.025 0.036 0.040 0.043 0.048 0.062 0.076 0.085 0.110 0.135 0.150 0.170 0.190 0.240 0.270 0.380 0.400 0.650 0.670 0.850 0.900 1.00 1.15 1.65 2.00 2.35 3.40 4.20 5.20 6.40 7.80 9.60 12.0 15.2 17.0 19.2 7.50 6.50 6.00 5.00 4.80 4.00 3.80 3.50 3.00 2.80 2.50 2.20 2.00 1.80 1.60 1.50 1.40 1.30 1.20 1.10 0.95 0.85 0.80 0.70 0.65 0.60 0.55 0.50 0.40 0.36 0.46 0.40 0.35 0.32 0.30 0.28 0.25 0.22 0.20 0.18 10.00 10.00 8.40 6.70 6.50 5.60 4.00 4.00 4.30 3.80 3.40 3.10 2.80 2.60 2.30 2.10 2.00 1.72 1.70 1.45 1.25 1.12 1.10 0.95 0.90 0.82 0.77 0.67 0.57 0.55 0.48 0.42 0.38 0.35 0.32 0.30 0.28 0.25 0.22 0.20 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................400 pcs. per reel Product Dimensions DIMENSIONS: MM (INCHES) Recommended Layout Electrical Schematic 108 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1208 Series - Shielded High Power Inductors Packaging Specifications QTY: 400 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 109 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Height of 4.3 mm maximum ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current rating to 9.2 amps ■ Lead free ■ RoHS compliant* SRR1240 Series - Shielded SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SRR1240-1R5Y SRR1240-3R3Y SRR1240-4R7M SRR1240-5R6M SRR1240-6R8M SRR1240-100M SRR1240-150M SRR1240-220M SRR1240-330M SRR1240-470M SRR1240-680M SRR1240-101M (µH) 1.5 3.3 4.7 5.6 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± 30 30 20 20 20 20 20 20 20 20 20 20 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 16 14 16 14 14 17 16 18 19 19 19 14 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 80 43 33 35 34 27 22 16 15 13 11 8 0.0095 0.0150 0.0180 0.0200 0.0230 0.0320 0.0470 0.0675 0.0970 0.1350 0.2000 0.3000 9.20 6.80 6.00 5.40 5.20 4.00 3.50 3.00 2.30 2.00 1.50 1.25 9.00 6.50 5.60 5.10 4.70 4.00 3.20 2.60 2.10 1.80 1.50 1.20 Recommended Layout General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ............................Ferrite DR and RI Wire .............Enameled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 25 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ....................800 pcs. per reel Product Dimensions DIMENSIONS: 110 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1240 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 800 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 111 Features Applications ■ Available in E12 values ■ Input/output of DC/DC converters ■ Inductance as low as 1.2 µH ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current rating to 9.2 amps ■ Lead free ■ RoHS compliant* SRR1260 Series - Shielded SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SRR1260-1R2Y SRR1260-2R4Y SRR1260-3R5Y SRR1260-4R7Y SRR1260-6R1Y SRR1260-7R6Y SRR1260-100M SRR1260-120M SRR1260-150M SRR1260-180M SRR1260-220M SRR1260-270M SRR1260-330M SRR1260-390M SRR1260-470M SRR1260-560M SRR1260-680M SRR1260-820M SRR1260-101M (µH) 1.20 2.40 3.50 4.70 6.10 7.60 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 20 20 20 20 20 20 20 20 20 20 20 20 20 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 18 18 22 19 21 16 32 27 25 28 29 26 27 22 22 24 22 25 26 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 91.1 63.8 37.6 36.7 29.8 27.9 21.0 19.4 17.6 15.5 13.4 12.7 9.97 10.4 7.63 7.92 7.43 6.85 6.07 0.0080 0.0115 0.0130 0.0155 0.0170 0.0190 0.0200 0.0230 0.0270 0.0360 0.0430 0.0450 0.0600 0.0700 0.0860 0.1000 0.1100 0.1450 0.1800 9.20 7.80 7.50 6.80 6.60 6.00 5.50 5.20 5.00 4.20 4.00 3.60 3.00 2.80 2.60 2.30 2.10 1.95 1.70 9.80 8.00 7.60 7.00 6.80 6.20 5.50 5.00 4.60 3.90 3.70 3.30 2.80 2.70 2.50 2.20 2.10 1.90 1.70 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ............................Ferrite DR and RI Wire .............Enameled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 25 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 112 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1260 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 113 Features Applications ■ Low height of only 5.0 mm ■ Input/output of DC/DC converters ■ Inductance as low as 0.9 µH ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ High current up to 20 amps ■ RoHS compliant* SRR1305 Series - SMD Shielded Power Inductors Electrical Specifications Bourns Part No. SRR1305-R90ZL SRR1305-1R4ZL SRR1305-2R0ZL SRR1305-2R7ZL Inductance 100 kHz L0 (µH) L1 (µH) 0.9 1.4 2.0 2.7 0.75 1.25 1.80 2.50 Tol. % ± ± ± ± 25 25 25 25 SRF Min. (MHz) RDC (mΩ) I rms (L1) Max. (A) I sat Typ. (A) 95 70 60 50 2.5 3.4 4.6 9.5 20.0 16.0 13.0 6.0 22.0 18.0 15.0 10.0 Inductance vs. DC Superposition Characteristics General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature...-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ............................Ferrite ER and SB Wire .......................Ultra-fine rectangular enameled copper Terminal ........................................Cu/Sn Adhesive ..............................Epoxy resin Rated Current ...........Ind. drop 20 % max. at (L1) Isat Temperature Rise ......................45 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: MM (INCHES) Electrical Schematic 114 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1305 Series - SMD Shielded Power Inductors Packaging Specifications 24.0 (.945) QTY: 600 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 115 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Unit height of 6.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 8 A Isat ■ Lead free ■ RoHS compliant* SRR1806 Series - Shielded Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SRR1806-100M SRR1806-150M SRR1806-220M SRR1806-330M SRR1806-470M SRR1806-680M SRR1806-101M SRR1806-151M SRR1806-221M SRR1806-331M SRR1806-471M SRR1806-681M SRR1806-102M (µH) 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 Q Ref. Test Frequency (MHz) SRF Typ. (MHz) RDC ±20% (Ω) I rms Max. (A) I sat Typ. (A) 56 53 51 44 40 37 40 39 29 30 27 19 46 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 19.0 17.5 16.0 10.0 8.0 6.0 4.6 4.3 3.5 3.0 2.4 2.1 1.5 0.033 0.039 0.053 0.083 0.110 0.170 0.270 0.400 0.510 0.790 1.000 1.470 2.160 4.00 3.60 3.00 2.50 2.00 1.60 1.30 1.05 1.00 0.80 0.64 0.54 0.45 8.20 7.20 6.20 5.00 4.20 3.40 2.60 2.30 1.90 1.40 1.30 1.10 0.90 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 10 sec. max. Operating Temperature ..-40 °C to +125 °C (Temperature rise included) Storage Temperature..-45 °C to +125 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core.......................................Ferrite core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Cu/Ni/Sn Rated CurrentInd. drop 10 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................250 pcs. per reel Product Dimensions Soldering Profile Recommended Layout Electrical Schematic 116 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR1806 Series - Shielded Power Inductors Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 250 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 117 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Mounting height of only 1.15 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Inductance value to 1.5 µH ■ RoHS compliant* SRR3011 Series - Shielded SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SRR3011-1R5YL SRR3011-2R5YL SRR3011-3R3YL SRR3011-4R7YL SRR3011-6R8YL SRR3011-100YL SRR3011-150YL SRR3011-220YL SRR3011-330YL SRR3011-470YL SRR3011-680YL SRR3011-101YL (µH) 1.50 2.50 3.30 4.70 6.80 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 20 20 20 20 20 20 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 11 7 8 9 10 18 16 11 14 16 14 39 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 124 112 101 69 49 42 37 31 25 18 15 13 0.055 0.085 0.090 0.125 0.210 0.280 0.420 0.680 0.860 1.800 2.250 3.600 1.60 1.20 1.00 0.90 0.72 0.65 0.48 0.38 0.32 0.27 0.22 0.18 1.30 1.00 0.85 0.75 0.62 0.50 0.38 0.32 0.27 0.23 0.18 0.15 Recommended Layout General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ............................Ferrite DR and RI Wire .............Enameled copper wire 130 Terminal.....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ..................30 °C max. at rated Irms Packaging ..................1200 pcs. per reel Product Dimensions DIMENSIONS: 118 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR3011 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1200 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 119 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Mounting height of only 1.15 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Inductance value to 0.47 µH ■ RoHS compliant* SRR4011 Series - Shielded SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SRR4011-R47YL SRR4011-1R2YL SRR4011-1R5YL SRR4011-2R2YL SRR4011-3R3YL SRR4011-4R7YL SRR4011-6R2YL SRR4011-8R2YL SRR4011-100YL SRR4011-150YL SRR4011-220YL SRR4011-330YL SRR4011-470YL SRR4011-680YL SRR4011-820YL SRR4011-101YL SRR4011-151YL (µH) 0.47 1.20 1.50 2.20 3.30 4.70 6.20 8.20 10.00 15.00 22.00 33.00 47.00 68.00 82.00 100.00 150.00 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 7 10 11 11 10 13 7 8 14 11 13 15 10 12 13 18 39 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 221 133 121 92 67 61 51 39 41 33 23 20 18 14 11 11 8 0.030 0.048 0.056 0.075 0.110 0.165 0.195 0.215 0.240 0.400 0.580 0.860 1.250 1.800 2.200 2.400 3.800 3.20 2.70 2.30 2.00 1.60 1.35 1.20 1.10 1.00 0.90 0.60 0.55 0.48 0.35 0.33 0.31 0.25 3.80 2.50 2.10 1.80 1.40 1.20 1.00 0.92 0.83 0.70 0.57 0.47 0.40 0.32 0.30 0.27 0.22 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ............................Ferrite DR and RI Wire .............Enameled copper wire 130 Terminal.....................................Ag/Ni/Sn Rated Current ....................Ind. drop 30 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging ..................1200 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 120 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR4011 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1200 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 121 Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Unit height of 3 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 3 A ■ RoHS compliant* SRR6603 Series - Shielded Power Inductors Electrical Specifications Inductance 100kHz Bourns Part No. SRR6603-1R0ML SRR6603-1R5ML SRR6603-2R2ML SRR6603-3R3ML SRR6603-4R7ML SRR6603-6R8ML SRR6603-100ML SRR6603-150ML SRR6603-220ML SRR6603-330ML SRR6603-470ML SRR6603-680ML SRR6603-101ML SRR6603-151ML SRR6603-221ML SRR6603-331ML SRR6603-471ML SRR6603-681ML SRR6603-102ML SRR6603-152ML SRR6603-222ML SRR6603-332ML SRR6603-472ML SRR6603-682ML SRR6603-103ML (µH) 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 1500.0 2200.0 3300.0 4700.0 6800.0 10000.0 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Q Ref. Test Frequency (kHz) Q SRF Nom. (MHz) RDC Max. (Ω) IDC Max. (A) 30 30 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 250 125 120 120 105 50 38 33 25 20 20 15 10 9 6 5 4 3 2 2 2 1 1 1 0.8 0.040 0.045 0.050 0.055 0.060 0.065 0.075 0.090 0.110 0.190 0.230 0.290 0.480 0.590 0.770 1.400 1.800 2.200 3.400 4.200 8.500 11.000 13.900 25.000 32.800 3.00 2.80 1.80 1.60 1.40 1.20 1.00 0.80 0.70 0.60 0.50 0.40 0.30 0.26 0.22 0.20 0.19 0.18 0.15 0.12 0.10 0.08 0.06 0.04 0.02 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 10 sec. max. Operating Temperature ..-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +105 °C Resistance to Soldering Heat ................................230 °C for 10 sec. Materials Core.........................Ferrite DR & RI core Wire .............................Enameled copper Base ..........................................Ceramic Terminal.....................................Cu/Ni/Au Temperature Rise ......................30 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Electrical Schematic Recommended Layout 122 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR6603 Series - Shielded Power Inductors Soldering Profile Packaging Specifications DIMENSIONS: MM (INCHES) QTY: 600 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 123 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Inductance value to 1000 µH ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Lead free ■ RoHS compliant* SRR7032 Series - Shielded SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SRR7032-3R3M SRR7032-4R7M SRR7032-6R8M SRR7032-100M SRR7032-150M SRR7032-220M SRR7032-330M SRR7032-470M SRR7032-680M SRR7032-101M SRR7032-151M SRR7032-221M SRR7032-331M SRR7032-471M SRR7032-681M SRR7032-102M (µH) 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 16 16 17 25 22 20 23 26 22 28 35 47 46 34 58 120 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 55 43 37 35 32 29 20 18 16 12 10 7.5 6.1 5.1 3.8 3.1 0.027 0.042 0.054 0.068 0.095 0.135 0.200 0.280 0.380 0.540 0.800 1.300 1.900 2.400 3.750 5.400 2.40 2.00 1.60 1.40 1.10 0.96 0.76 0.67 0.60 0.45 0.37 0.30 0.22 0.20 0.16 0.15 2.20 2.00 1.80 1.60 1.20 1.05 0.86 0.77 0.70 0.50 0.38 0.32 0.24 0.20 0.15 0.14 General Specifications Test Voltage.....................................0.5 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ............................Ferrite DR and RI Wire .............Enameled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................30 °C max. at rated Irms Packaging ..................1500 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 124 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR7032 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1500 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 125 Features Applications ■ Available in E6 values ■ Input/output of DC/DC converters ■ Current rating to 2.0 amps ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Lead free ■ RoHS compliant* SRR7045 Series - Shielded SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. SRR7045-100M SRR7045-150M SRR7045-220M SRR7045-330M SRR7045-470M SRR7045-680M SRR7045-820M SRR7045-101M SRR7045-151M SRR7045-221M SRR7045-331M SRR7045-471M SRR7045-681M SRR7045-102M (µH) 10 15 22 33 47 68 82 100 150 220 330 470 680 1000 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Q Typ. Test Frequency (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 30 31 26 25 29 22 22 40 51 44 65 80 65 90 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 25 24 18 12 11 10 9 8 7 5 4 3 3 3 0.042 0.062 0.082 0.115 0.150 0.210 0.280 0.300 0.480 0.700 0.730 1.100 1.600 2.400 2.00 1.60 1.35 1.15 0.95 0.77 0.70 0.65 0.53 0.45 0.40 0.32 0.27 0.25 1.70 1.35 1.10 0.90 0.78 0.60 0.60 0.50 0.41 0.36 0.25 0.22 0.20 0.15 Recommended Layout General Specifications Test Voltage.....................................0.5 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core ............................Ferrite DR and RI Wire .............Enameled copper wire 130 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat (-100M through -221M) ....................Ind. drop 25 % typ. at Isat (-331M through -102M) Temperature Rise ..................30 °C max. at rated Irms Packaging ..................1000 pcs. per reel Product Dimensions DIMENSIONS: 126 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR7045 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1000 PCS. PER REEL DIMENSIONS: REV. 06/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 127 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 2.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 7 A ■ Lead free ■ RoHS compliant* SRU1028 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU1028-1R0Y SRU1028-1R5Y SRU1028-2R2Y SRU1028-3R3Y SRU1028-4R7Y SRU1028-6R8Y SRU1028-8R2Y SRU1028-100Y SRU1028-150Y SRU1028-220Y SRU1028-330Y SRU1028-470Y SRU1028-560Y SRU1028-680Y SRU1028-820Y SRU1028-101Y SRU1028-121Y SRU1028-151Y Inductance 100 KHz (µH) 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 15.0 22.0 33.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 14 12 12 14 12 12 12 20 26 26 24 20 22 20 20 20 18 18 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 100.0 80.0 65.0 55.0 40.0 30.0 28.0 25.0 22.0 16.0 12.0 11.0 10.0 9.0 8.0 7.0 6.0 5.0 4.9 7.3 11.0 15.0 16.5 25.0 28.5 40.0 69.0 104.0 139.0 167.0 208.0 232.0 323.0 365.0 428.0 518.0 7.00 6.50 5.30 4.60 4.50 3.50 3.30 2.80 2.00 1.60 1.25 1.30 1.10 1.00 0.90 0.85 0.65 0.70 8.00 6.50 4.80 4.30 3.80 3.00 2.70 2.40 2.00 1.40 1.20 1.10 1.00 0.90 0.85 0.80 0.70 0.65 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging..................1,000 pcs. per reel Product Dimensions Inductor Connection DIMENSIONS: MM (INCHES) Recommended Layout 128 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU1028 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1,000 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 129 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 3.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 7.2 A ■ Lead free ■ RoHS compliant* SRU1038 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU1038-1R5Y SRU1038-2R2Y SRU1038-3R5Y SRU1038-5R0Y SRU1038-6R2Y SRU1038-100Y SRU1038-150Y SRU1038-220Y SRU1038-330Y SRU1038-470Y SRU1038-680Y SRU1038-101Y SRU1038-151Y SRU1038-221Y SRU1038-331Y Inductance 100 KHz (µH) 1.5 2.2 3.5 5.0 6.2 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 14 12 14 12 12 24 24 20 22 22 24 24 20 22 20 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 65.0 55.0 35.0 30.0 25.0 20.0 16.0 12.0 10.0 8.0 7.0 6.0 5.0 4.0 3.0 5.2 7.7 11.5 14.5 16.5 25.0 37.0 55.8 86.0 121.0 166.0 220.0 358.0 565.0 773.0 7.20 6.80 5.50 4.60 4.00 3.80 2.80 2.20 1.80 1.65 1.10 1.30 0.90 0.65 0.55 7.00 6.50 5.50 4.80 4.20 3.60 2.70 2.30 1.80 1.60 1.30 1.10 0.80 0.65 0.52 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................800 pcs. per reel Product Dimensions Inductor Connection DIMENSIONS: MM (INCHES) Recommended Layout 130 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU1038 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 800 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 131 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 4.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 7.8 A ■ Lead free ■ RoHS compliant* SRU1048 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU1048-R80Y SRU1048-1R5Y SRU1048-2R2Y SRU1048-3R0Y SRU1048-4R7Y SRU1048-6R8Y SRU1048-8R2Y SRU1048-100Y SRU1048-150Y SRU1048-220Y SRU1048-330Y SRU1048-470Y SRU1048-560Y SRU1048-680Y SRU1048-820Y SRU1048-101Y SRU1048-151Y SRU1048-221Y SRU1048-331Y Inductance 100 KHz (µH) 0.8 1.5 2.2 3.0 4.7 6.8 8.2 10.0 15.0 22.0 33.0 47.0 56.0 68.0 82.0 100.0 150.0 220.0 330.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 8 14 14 14 12 10 8 26 30 22 24 26 26 24 24 26 24 20 18 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 100.0 70.0 55.0 40.0 30.0 20.0 18.0 16.0 14.0 12.0 10.0 8.0 7.0 6.0 5.5 5.0 4.5 4.0 3.0 3.6 4.3 5.3 7.2 9.5 13.6 15.0 18.5 29.0 42.0 63.0 94.0 110.0 127.0 149.0 160.0 235.0 350.0 490.0 7.80 7.00 6.50 6.20 5.50 4.80 4.60 4.50 3.20 2.60 2.10 1.70 1.60 1.40 1.30 1.20 1.00 0.80 0.65 8.50 7.20 6.30 6.00 4.75 4.10 3.80 3.70 2.70 2.00 1.70 1.50 1.40 1.25 1.10 1.00 0.80 0.70 0.52 General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................30 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Inductor Connection DIMENSIONS: MM (INCHES) Recommended Layout 132 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU1048 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 133 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 1.1 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 1.1 A ■ Lead free ■ RoHS compliant* SRU3011 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU3011-1R5Y SRU3011-2R2Y SRU3011-3R3Y SRU3011-4R7Y SRU3011-6R8Y SRU3011-100Y Inductance 100 KHz (µH) 1.5 2.2 3.3 4.7 6.8 10.0 Electrical Schematic Tol. % ± ± ± ± ± ± 30 30 30 30 30 30 Test Q Frequency Ref. (MHz) 7 7 8 8 7 8 7.96 7.96 7.96 7.96 7.96 2.52 SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) Marking 180 150 120 90 85 60 57 80 116 178 245 340 1.10 0.92 0.84 0.63 0.50 0.40 1.00 0.90 0.78 0.62 0.46 0.35 A B C D E F Inductor Connection General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging...................1500 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 134 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU3011 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1500 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 135 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 1.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 1.7 A ■ Lead free ■ RoHS compliant* SRU3017 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU3017-2R2Y SRU3017-3R3Y SRU3017-4R7Y SRU3017-6R8Y SRU3017-100Y SRU3017-150Y SRU3017-220Y SRU3017-330Y SRU3017-470Y Inductance 100 KHz (µH) 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 Test Q Frequency Ref. (MHz) 8 8 10 10 15 20 20 20 18 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 SRF Typ. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 100 80 60 50 40 35 30 20 18 35 55 68 85 120 175 250 430 540 0.98 0.80 0.63 0.53 0.47 0.35 0.30 0.25 0.21 1.70 1.45 1.10 1.00 0.85 0.68 0.60 0.47 0.36 Inductor Connection General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire ..............Enameled copper (Class F) Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................30 °C max. at rated Irms Packaging...................1200 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 136 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU3017 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1200 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 137 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 2.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 0.86 A ■ Lead free ■ RoHS compliant* SRU3028 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU3028-100Y SRU3028-150Y SRU3028-220Y SRU3028-330Y SRU3028-470Y SRU3028-680Y SRU3028-101Y Inductance 100 KHz (µH) 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± 30 30 30 30 30 30 30 Test Q Frequency Ref. (MHz) 20 18 18 20 20 20 20 7.96 2.52 2.52 2.52 2.52 2.52 0.796 SRF Typ. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 35 25 15 10 8 7 5 160 230 270 450 815 1400 2200 0.72 0.66 0.60 0.47 0.32 0.24 0.19 0.86 0.72 0.62 0.48 0.38 0.28 0.21 Inductor Connection General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire ..............Enameled copper (Class F) Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 138 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU3028 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 139 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 1.1 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 1800 mA ■ Lead free ■ RoHS compliant* SRU5011 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU5011-1R5Y SRU5011-2R5Y SRU5011-3R3Y SRU5011-4R7Y SRU5011-6R8Y SRU5011-100Y SRU5011-150Y SRU5011-220Y SRU5011-330Y SRU5011-470Y SRU5011-680Y SRU5011-101Y Inductance 100 KHz (µH) 1.5 2.5 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 8 8 8 8 8 12 12 14 14 16 14 30 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 0.796 195.0 125.0 110.0 85.0 70.0 50.0 42.0 38.0 30.0 25.0 20.0 15.0 32 52 66 95 130 170 250 380 550 800 1240 1600 1.80 1.30 1.15 1.00 0.82 0.70 0.60 0.50 0.38 0.32 0.26 0.20 1.50 1.10 0.94 0.82 0.68 0.58 0.48 0.40 0.30 0.26 0.22 0.18 General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................25 °C max. at rated Irms Packaging...................1500 pcs. per reel Inductor Connection Product Dimensions Recommended Layout DIMENSIONS: 140 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU5011 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1,500 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 141 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 1.6 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 1.8 A ■ Lead free ■ RoHS compliant* SRU5016 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU5016-1R8Y SRU5016-3R3Y SRU5016-4R7Y SRU5016-6R8Y SRU5016-100Y SRU5016-150Y SRU5016-220Y SRU5016-330Y SRU5016-470Y SRU5016-680Y SRU5016-101Y Inductance 100 KHz (µH) 1.8 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 9 9 9 8 15 15 15 13 18 18 18 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 100 80 60 50 40 32 28 22 18 15 12 24 35 43 50 84 130 195 300 390 560 850 1.75 1.55 1.30 1.20 1.00 0.80 0.65 0.54 0.46 0.36 0.30 1.70 1.50 1.20 1.10 0.90 0.72 0.56 0.50 0.42 0.33 0.27 Inductor Connection General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging...................1000 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 142 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU5016 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1,000 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 143 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 1.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 2.8 A ■ Lead free ■ RoHS compliant* SRU5018 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU5018-1R0Y SRU5018-1R5Y SRU5018-2R2Y SRU5018-3R5Y SRU5018-4R7Y SRU5018-6R8Y SRU5018-100Y SRU5018-150Y SRU5018-220Y SRU5018-330Y SRU5018-470Y SRU5018-680Y SRU5018-101Y Inductance 100 KHz (µH) 1.0 1.5 2.2 3.5 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 9 9 10 9 8.5 7.5 12 12 12 13 13 12 15 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 200 160 130 90 80 60 50 40 28 23 18 16 15 12.5 15.5 20.5 32.0 36.0 50.0 65.0 100.0 160.0 220.0 330.0 480.0 620.0 2.80 2.50 2.30 2.10 2.00 1.45 1.25 0.95 0.68 0.66 0.54 0.37 0.32 2.85 2.40 2.10 1.70 1.55 1.20 1.05 0.80 0.65 0.56 0.45 0.36 0.31 Inductor Connection General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................30 °C max. at rated Irms Packaging...................1000 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 144 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU5018 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1,000 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 145 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 2.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 3.5 A ■ Lead free ■ RoHS compliant* SRU5028 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU5028-1R2Y SRU5028-2R2Y SRU5028-3R3Y SRU5028-4R7Y SRU5028-6R8Y SRU5028-100Y SRU5028-150Y SRU5028-220Y SRU5028-330Y SRU5028-470Y SRU5028-680Y SRU5028-101Y Inductance 100 KHz (µH) 1.2 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 10 10 10 9 10 18 18 15 15 13 13 15 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 200 130 90 50 55 25 23 18 16 13 10 8 16.8 21.0 24.0 32.0 42.0 63.0 108.0 162.0 203.0 285.0 450.0 625.0 3.50 3.20 2.80 2.20 2.00 1.80 1.10 0.95 0.80 0.70 0.56 0.47 3.40 2.50 2.10 1.85 1.55 1.40 1.00 0.85 0.68 0.62 0.46 0.42 Inductor Connection General Specifications Test Voltage.....................................0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions Recommended Layout DIMENSIONS: 146 MM (INCHES) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU5028 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 600 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 147 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 2.8 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 4.5 A ■ Lead free ■ RoHS compliant* SRU8028 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU8028-2R5Y SRU8028-3R3Y SRU8028-4R7Y SRU8028-6R8Y SRU8028-100Y SRU8028-150Y SRU8028-220Y SRU8028-330Y SRU8028-470Y SRU8028-680Y SRU8028-101Y Inductance 100 KHz (µH) 2.5 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 15 12 15 13 22 20 22 20 14 23 35 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 65.0 60.0 50.0 40.0 35.0 25.0 20.0 15.0 12.0 9.0 8.0 13.6 17.5 20.0 34.0 45.0 66.0 106.0 147.0 177.0 317.0 390.0 4.50 3.60 3.70 2.80 2.60 2.00 1.60 1.30 1.20 0.85 0.75 4.20 3.50 3.20 2.50 2.20 1.70 1.50 1.10 1.00 0.80 0.70 Inductor Connection DIMENSIONS: General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging...................1500 pcs. per reel Product Dimensions MM (INCHES) Recommended Layout 148 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU8028 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1,500 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 149 Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Unit height of 4.3 mm ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios ■ Current up to 5.4 A ■ Lead free ■ RoHS compliant* SRU8043 Series - Shielded SMD Power Inductors Electrical Specifications Bourns Part No. SRU8043-2R2Y SRU8043-3R9Y SRU8043-4R7Y SRU8043-6R8Y SRU8043-100Y SRU8043-150Y SRU8043-220Y SRU8043-330Y SRU8043-470Y SRU8043-680Y SRU8043-101Y Inductance 100 KHz (µH) 2.2 3.9 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 Electrical Schematic Tol. % ± ± ± ± ± ± ± ± ± ± ± 30 30 30 30 30 30 30 30 30 30 30 Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) 15 15 13 12 27 26 24 21 21 20 50 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 65.0 42.0 36.0 30.0 20.0 15.0 12.0 11.0 9.0 7.0 6.0 11.2 14.6 17.0 22.4 30.0 46.0 72.5 100.0 120.0 192.0 287.0 5.40 4.80 4.60 3.80 3.50 2.70 2.20 1.70 1.50 1.20 1.00 5.20 4.00 3.60 3.10 2.70 2.00 1.70 1.40 1.20 1.00 0.80 Inductor Connection DIMENSIONS: General Specifications Test Voltage ........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ................................260 °C for 10 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base ......................................LCP E4008 Terminal ....................................Ag/Ni/Sn Rated Current ....................Ind. drop 35 % typ. at Isat Temperature Rise ......................40 °C max. at rated Irms Packaging...................1000 pcs. per reel Product Dimensions MM (INCHES) Recommended Layout 150 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRU8043 Series - Shielded SMD Power Inductors Packaging Specifications QTY: 1,000 PCS. PER REEL DIMENSIONS: REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 151 152 III. Surface Mount Chip Beads Product Capability Matrix......................................................................................154 Impedance Range ....................................................................................................154 Current Range ..........................................................................................................155 Product Specifications • MH Series High Current Chip Beads..............................................................156 • MG, MU, MZ Series High Impedance Chip Beads........................................164 • MT Series Low Current/Low Impedance Chip Beads ..................................172 • MA Series Chip Ferrite Bead Arrays ..............................................................177 153 Multi-Layer Chip Beads Product Capability Matrix Product Selection Guide Impedance Model MA3216 MH4532 MH4516 MH3225 MH3261 MH2029 MH1608 MG3261, MU3261, MZ3261 MG2029, MU2029, MZ2029 MG1608, MU1608, MZ1608 MU1005 MT4532 MT4516 MT3225 MT3266 MT3261 MT2029 MT1608 High Current Low High • • • • • • • • • • • • • Low • • • • • • • • • • • • • • • • • • • • • • • Sealed • • • • • • • • • • • • • • • • • • Size - mm (L x W x H) 3.2 x 1.6 x 0.8 4.5 x 3.2 x 1.5 4.5 x 1.6 x 1.6 3.2 x 2.5 x 1.3 3.2 x 1.6 x 1.1 2.0 x 1.2 x 0.9 1.6 x 0.8 x 0.8 3.2 x 1.6 x 1.1 2.0 x 1.2 x 0.9 1.6 x 0.8 x 0.8 1.0 x 0.5 x 0.5 4.5 x 3.2 x 1.5 4.5 x 1.6 x 1.6 2.0 x 1.25 x 1.25 3.2 x 1.6 x 1.6 3.2 x 1.6 x 1.1 2.0 x 1.2 x 0.9 1.6 x 0.8 x 0.8 Impedance Model Impedance (ohms) at 100MHz 1.0 10 50 100 200 500 1000 2000 MA3216 MH4532 MH4516 MH3225 MH3261 MH2029 MH1608 MG3261, MU3261, MZ3261 MG2029, MU2029, MZ2029 MG1608, MU1608, MZ1608 MU1005 MT4532 MT4516 MT3225 MT3266 MT3261 MT2029 MT1608 154 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Multi-Layer Chip Beads Product Capability Matrix Current Model Current IDC (A) max. 0.0 0.1 0.5 1.0 2.0 3.0 4.0 6.0 MA3216 MH4532 MH4516 MH3225 MH3261 MH2029 MH1608 MG3261, MU3261, MZ3261 MG2029, MU2029, MZ2029 MG1608, MU1608, MZ1608 MU1005 MT4532 MT4516 MT3225 MT3266 MT3261 MT2029 MT1608 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 155 Features ■ ■ ■ ■ Applications High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide impedance range ■ ■ ■ Power supply lines IC power lines Signal lines MH Series High Current Chip Ferrite Beads Electrical Specifications Model Number Impedance (Ω) at 100 MHz RDC (mΩ) Max. IDC (A) Max. MH4532-700Y MH4532-800Y MH4532-121Y MH4532-131Y MH4532-151Y MH4532-681Y MH4532-132Y MH4516-600Y MH4516-750Y MH4516-800Y MH4516-102Y MH3261-190Y MH3261-260Y MH3261-310Y MH3261-500Y MH3261-800Y MH3261-121Y MH3261-151Y MH3261-301Y MH3261-471Y MH3261-501Y MH3261-601Y MH3225-300Y MH3225-520Y MH3225-650Y MH3225-900Y MH3225-151Y MH3225-201Y MH2029-070Y MH2029-100Y MH2029-300Y MH2029-800Y MH2029-121Y MH2029-151Y MH2029-221Y MH2029-301Y MH2029-471Y MH2029-601Y MH1608-300Y MH1608-800Y MH1608-121Y MH1608-151Y MH1608-221Y MH1608-301Y MH1608-471Y MH1608-601Y 70 ±25 % 80 ±25 % 120 ±25 % 130 ±25 % 150 ±25 % 680 ±25 % 1300 ±25 % 60 ±25 % 75 ±25 % 80 ±25 % 1000 ±25 % 19 ±25 % 26 ±25 % 31 ±25% 50 ±25 % 80 ±25 % 120 ±25 % 150 ±25 % 300 ±25 % 470 ±25 % 500 ±25 % 600 ±25 % 30 ±25 % 52 ±25 % 65 ±25 % 90 ±25 % 150 ±25 % 200 ±25 % 7 ±25 % 10 ±25 % 30 ±25% 80 ±25 % 120 ±25 % 150 ±25 % 220 ±25 % 300 ±25 % 470 ±25 % 600 ±25 % 30 ±25 % 80 ±25 % 120 ±25 % 150 ±25 % 220 ±25 % 300 ±25 % 470 ±25 % 600 ±25 % 30 10 50 40 20 30 60 10 25 50 150 40 40 40 25 30 100 100 200 200 40 100 50 50 30 100 20 30 30 30 25 40 100 100 100 200 200 200 60 40 100 100 100 200 200 200 6.0 6.0 3.0 3.0 5.0 4.0 3.0 6.0 3.0 3.0 1.5 3.0 3.0 3.0 3.0 3.0 2.0 2.0 1.0 1.0 3.0 2.0 3.0 3.0 3.0 2.0 5.0 4.0 3.0 3.0 3.0 3.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 3.0 2.0 2.0 2.0 1.0 1.0 1.0 156 General Specifications Operating Temperature ...................................-55 °C to +125 °C Storage Temperature ..-55 °C to +125 °C Storage Condition ......................+40 °C max. at 70 % RH Reflow Soldering ......................230 ˚C, 50 seconds max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Rated Current ..................Based on max. temperature rise of +40 °C Terminal Strength (Force “F” applied for 30 seconds) 4532 Series ............................1.5 F (Kg) 4516 Series ............................1.0 F (Kg) 3261 Series ............................1.0 F (Kg) 3225 Series ............................1.0 F (Kg) 2029 Series ............................0.6 F (Kg) 1608 Series ............................0.5 F (Kg) Materials Core Material .................................Ferrite Internal Conductor ...............Ag or Ag/Pd Terminal .....................................Ag/Ni/Sn *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MH Series High Current Chip Ferrite Beads Electrical Specifications (continued) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 157 MH Series High Current Chip Ferrite Beads Electrical Specifications (continued) 158 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MH Series High Current Chip Ferrite Beads Electrical Specifications (continued) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 159 MH Series High Current Chip Ferrite Beads Electrical Specifications (continued) 160 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MH Series High Current Chip Ferrite Beads Electrical Specifications (continued) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 161 MH Series High Current Chip Ferrite Beads Electrical Specifications (continued) Equivalent Circuit Recommended Soldering Product Dimensions Recommended Land Pattern DIMENSIONS ARE: 162 MM (INCHES) Series A B C D G H I 4532 4.5 ± 0.2 (.177 ± .008) 3.2 ± 0.2 (.126 ± .008) 1.5 ± 0.2 (.059 ± .008) 0.5 ± 0.2 (.020 ± .008) 3.0 (.118) 3.0 (.118) 1.5 (.059) 4516 4.5 ± 0.2 (.177 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.5 ± 0.2 (.020 ± .008) 3.0 (.118) 1.4 (.055) 1.5 (.059) 3261 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.1 ± 0.2 (.043 ± .008) 0.5 ± 0.2 (.020 ± .008) 2.0 (.079) 1.4 (.053) 1.1 (.043) 3225 3.2 ± 0.2 (.126 ± .008) 2.5 ± 0.2 (.098 ± .008) 1.3 ± 0.2 (.051 ± .008) 0.5 ± 0.2 (.020 ± .008) 2.2 (.118) 2.3 (.091) 1.1 (.043) 2029 2.0 ± 0.2 (.079 ± .008) 1.2 ± 0.2 (.047 ± .008) 0.9 ± 0.2 (.035 ± .008) 0.5 ± 0.2 (.020 ± .008) 1.0 (.040) 1.0 (.040) 1.0 (.040) 1608 1.6 ± 0.2 (.063 ± .008) 0.8 ± 0.2 (.031 ± .008) 0.8 ± 0.2 (.031 ± .008) 0.5 ± 0.2 (.020 ± .008) 0.7 (.028) 0.7 (.128) 0.7 (.128) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MH Series High Current Chip Ferrite Beads Reel Dimensions CARRIER TAPE WIDTH: D CAVITY PITCH: E D Series Pcs. per Reel Gross Weight (g) D E G T 8.0 (.315) 14.0 + 0 (.551 + 0) 16.5 (.650) 4532 1,000 170 12.0 (.472) 4516 2,000 180 12.0 (.472) 8.0 (.315) 14.0 + 0 (.551 + 0) 16.5 (.650) 3261 3,000 150 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) 3225 2,000 160 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) 2029 4,000 120 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) 1608 4,000 90 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 163 Features ■ ■ ■ ■ Applications High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide impedance range ■ ■ ■ Power supply lines IC power lines Signal lines MG, MU, MZ Series High Impedance Chip Ferrite Beads Electrical Specifications Model Number Impedance (Ω) at 100 MHz RDC (Ω) Max. IDC (mA) Max. MU3261-121Y MG3261-151Y MU3261-221Y MG3261-301Y MU3261-301Y MU3261-471Y MU3261-601Y MZ3261-601Y MU3261-801Y MZ3261-122Y MU3261-122Y MU3261-152Y MZ3261-202Y MU3261-202Y MG2029-400Y MU2029-600Y MG2029-800Y MG2029-121Y MU2029-151Y MU2029-221Y MU2029-301Y MU2029-471Y MZ2029-601Y MZ2029-601T MZ2029-102Y MZ2029-152Y MZ2029-202Y MG1608-400Y MU1608-600Y MG1608-800Y MG1608-121Y MU1608-151Y MU1608-221Y MU1608-301Y MU1608-471Y MZ1608-601Y MZ1608-102Y MZ1608-152Y MZ1608-202Y MU1005-300Y MU1005-600Y MU1005-121Y MU1005-151Y MU1005-221Y MU1005-301Y MU1005-471Y MU1005-601Y 120 ±25 % 150 ±25 % 220 ±25 % 300 ±25 % 300 ±25 % 470 ±25 % 600 ±25 % 600 ±25 % 800 ±25 % ±25 % (at 50 ±25 % (at 50 ±25 % (at 50 ±25 % (at 30 ±25 % (at 30 40 ±25 % 60 ±25 % 80 ±25% 120 ±25 % 150 ±25 % 220 ±25 % 300 ±25 % 470 ±25 % 600 ±25 % 600 ±25 % 1000 ±25 % 1500 ±25 % 2000 ±25 % 40 ±25 % 60 ±25 % 80 ±25 % 120 ±25 % 150 ±25 % 220 ±25 % 300 ±25 % 470 ±25 % 600 ±25 % 1000 ±25 % 1500 ±25 % 2000 ±25 % 30 ±25 % 60 ±25 % 120 ±25 % 150 ±25 % 220 ±25 % 300 ±25 % 470 ±25 % 600 ±25 % 0.15 0.30 0.35 0.30 0.30 0.35 0.30 0.30 0.60 0.50 0.50 0.70 0.60 0.60 0.20 0.10 0.20 0.25 0.20 0.30 0.30 0.35 0.40 0.40 0.45 0.55 0.60 0.30 0.20 0.30 0.30 0.25 0.30 0.35 0.45 0.45 0.60 0.70 0.80 0.20 0.25 0.30 0.30 0.40 0.50 0.65 0.80 900 300 700 300 300 400 200 200 300 100 100 300 100 100 300 900 300 300 800 200 200 700 100 200 100 100 50 300 700 300 200 600 200 150 350 100 100 50 50 300 300 100 100 100 100 100 80 164 1200 1200 1500 2000 2000 MHz) MHz) MHz) MHz) MHz) General Specifications Operating Temperature ...................................-55 °C to +125 °C Storage Temperature ..-55 °C to +125 °C Storage Condition ......................+40 °C max. at 70 % RH Reflow Soldering ......................230 ˚C, 50 seconds max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Rated Current ..................Based on max. temperature rise of +40 °C Terminal Strength (Force “F” applied for 30 seconds) 3261 Series ............................1.0 F (Kg) 2029 Series ............................0.6 F (Kg) 1608 Series ............................0.5 F (Kg) Materials Core Material .................................Ferrite Internal Conductor ...............Ag or Ag/Pd Terminal .....................................Ag/Ni/Sn *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MG, MU, MZ Series High Impedance Chip Ferrite Beads Electrical Specifications (continued) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 165 MG, MU, MZ Series High Impedance Chip Ferrite Beads Electrical Specifications (continued) 166 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MG, MU, MZ Series High Impedance Chip Ferrite Beads Electrical Specifications (continued) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 167 MG, MU, MZ Series High Impedance Chip Ferrite Beads Electrical Specifications (continued) 168 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MG, MU, MZ Series High Impedance Chip Ferrite Beads Electrical Specifications (continued) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 169 MG, MU, MZ Series High Impedance Chip Ferrite Beads Electrical Specifications (continued) Equivalent Circuit Recommended Soldering Product Dimensions Recommended Land Pattern MM (INCHES) DIMENSIONS ARE: 170 Series A B C D G H I 3261 3.2 ±0.2 (.126 ±.008) 1.6 ±0.2 (.063 ±.008) 1.1 ±0.2 (.043 ±.008) 0.5 ±0.2 (.020 ±.008) 2.0 (.079) 1.4 (.053) 1.1 (.043) 2029 2.0 ±0.2 (.079 ±.008) 1.2 ±0.2 (.047 ±.008) 0.9 ±0.2 (.035 ±.008) 0.5 ±0.2 (.020 ±.008) 1.0 (.040) 1.0 (.040) 1.0 (.040) 1608 1.6 ±0.2 (.063 ±.008) 0.8 ±0.2 (.031 ±.008) 0.8 ±0.2 (.031 ±.008) 0.5 ±0.2 (.020 ±.008) 0.7 (.028) 0.7 (.128) 0.7 (.128) 1005 1.0 ±0.10 (.04 ±.004) 0.50 ±0.10 (0.02 ±.004) 0.50 ±0.10 (.02 ±.004) 0.25 ±0.10 (.01 ±.004) 0.5 (.02) 0.55 (.022) 0.7 (.028) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MG, MU, MZ Series High Impedance Chip Ferrite Beads Reel Dimensions CARRIER TAPE WIDTH: D CAVITY PITCH: 4.0 (.157) 8.0 (.315) Series Pcs. per Reel Gross Weight (g) 3261 3,000 150 2029 4,000 120 1608 4,000 90 1005 10,000 135 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. D G T 8.0 (.315) 10.0 +0 (.394 +0) 12.5 (.492) 171 Features ■ ■ ■ ■ Applications High resistance to heat and humidity Resistance to mechanical shock and pressure Accurate dimensions for automatic surface mounting Wide impedance range ■ ■ ■ Power supply lines IC power lines Signal lines MT Series Low Impedance Chip Ferrite Beads Electrical Specifications Model Number Impedance (Ω) at 100 MHz RDC (Ω) Max. IDC (mA) Max. MT4532-250Y MT4532-700Y MT4532-121Y MT4532-131Y MT4516-800Y MT4516-101Y MT4516-151Y MT3225-310Y MT3225-520Y MT3225-600Y MT3266-600Y MT3261-190Y MT3261-260Y MT3261-310Y MT3261-420Y MT3261-500Y MT3261-700Y MT3261-900Y MT2029-070Y MT2029-100Y MT2029-110Y MT2029-170Y MT2029-260Y MT2029-300Y MT2029-400Y MT1608-050Y MT1608-090Y MT1608-300Y 25 ±25 % 70 ±25 % 120 ±25 % 125 ±25 % 80 ±25 % 100 ±25 % 150 ±25 % 31 ±25 % 52 ±25 % 60 ±25 % 60 ±25 % 19 ±25 % 26 ±25 % 31 ±25 % 42 ±25 % 50 ±25 % 70 ±25 % 90 ±25 % 7 ±25 % 10 ±25 % 11 ±25 % 17 ±25 % 26 ±25 % 30 ±25 % 40 ±25 % 5 ±25 % 9 ±25 % 30 ±25 % 0.4 0.3 0.3 0.3 0.3 0.1 0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1 0.2 0.2 0.3 300 300 300 300 300 500 300 400 400 400 400 500 500 500 500 500 500 500 600 600 600 600 600 600 600 600 500 400 General Specifications Operating Temperature ...................................-55 °C to +125 °C Storage Temperature ..-55 °C to +125 °C Storage Condition ......................+40 °C max. at 70 % RH Reflow Soldering ......................230 ˚C, 50 seconds max. Resistance to Soldering Heat .................................260 ˚C, 5 seconds Rated Current ..................Based on max. temperature rise of +40 °C Terminal Strength (Force “F” applied for 30 seconds) 4532 Series ............................1.5 F (Kg) 4516 Series ............................1.0 F (Kg) 3225 Series ............................1.0 F (Kg) 3266 Series ............................1.0 F (Kg) 3261 Series ............................1.0 F (Kg) 2029 Series ............................0.6 F (Kg) 1608 Series ............................0.5 F (Kg) Materials Core Material .................................Ferrite Internal Conductor ...............Ag or Ag/Pd Terminal .....................................Ag/Ni/Sn Electrical Specifications (continued) 172 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MT Series Low Impedance Chip Ferrite Beads Electrical Specifications (continued) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 173 MT Series Low Impedance Chip Ferrite Beads Electrical Specifications (continued) 174 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MT Series Low Impedance Chip Ferrite Beads Electrical Specifications (continued) Equivalent Circuit Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Recommended Soldering 175 MT Series Low Impedance Chip Ferrite Beads Product Dimensions Recommended Land Pattern MM (INCHES) DIMENSIONS ARE: Series A B C D G H I 4532 4.5 ± 0.2 (.177 ± .008) 3.2 ± 0.2 (.126 ± .008) 1.5 ± 0.2 (.059 ± .008) 0.5 ± 0.2 (.020 ± .008) 3.0 (.118) 3.0 (.118) 1.5 (.059) 4516 4.5 ± 0.2 (.177 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.5 ± 0.2 (.020 ± .008) 3.0 (.118) 1.4 (.055) 1.5 (.059) 3266 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.5 ± 0.2 (.020 ± .008) 2.2 (.118) 1.4 (.053) 1.1 (.043) 3261 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.1 ± 0.2 (.043 ± .008) 0.5 ± 0.2 (.020 ± .008) 2.0 (.079) 1.4 (.053) 1.1 (.043) 3225 3.2 ± 0.2 (.126 ± .008) 2.5 ± 0.2 (.098 ± .008) 1.3 ± 0.2 (.051 ± .008) 0.5 ± 0.2 (.020 ± .008) 2.2 (.118) 2.3 (.091) 1.1 (.043) 2029 2.0 ± 0.2 (.079 ± .008) 1.2 ± 0.2 (.047 ± .008) 0.9 ± 0.2 (.035 ± .008) 0.5 ± 0.2 (.020 ± .008) 1.0 (.040) 1.0 (.040) 1.0 (.040) 1608 1.6 ± 0.2 (.063 ± .008) 0.8 ± 0.2 (.031 ± .008) 0.8 ± 0.2 (.031 ± .008) 0.5 ± 0.2 (.020 ± .008) 0.7 (.028) 0.7 (.128) 0.7 (.128) Reel Dimensions CARRIER TAPE WIDTH: D CAVITY PITCH: E D 176 Series Pcs. per Reel Gross Weight (g) D E G T 4532 1,000 170 12.0 (.472) 8.0 (.315) 14.0 + 0 (.551 + 0) 16.5 (.650) 4516 2,000 180 12.0 (.472) 8.0 (.315) 14.0 + 0 (.551 + 0) 16.5 (.650) 3266 2,000 140 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) 3261 3,000 150 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) 3225 2,000 160 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) 2029 4,000 120 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) 1608 4,000 90 8.0 (.315) 4.0 (.157) 10.0 + 0 (.394 + 0) 12.5 (.492) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features ■ ■ ■ Applications Four beads in one package High speed and high impedance Nickel barrier ■ ■ ■ Waveform correction in: • Personal computers • Electrical equipment • Communication equipment Prevents noise intrusion in video, LCD Parallel signal line MA Series Chip Ferrite Bead Arrays Electrical Specifications Model Number Impedance (Ω) at 100MHz RDC (Ω) Max. IDC (mA) Max. MA3216-600M4 MA3216-800M4 MA3216-121M4 MA3216-201M4 MA3216-301M4 MA3216-471M4 MA3216-601M4 MA3216-102M4 MA3216-600T4 MA3216-121T4 MA3216-201T4 MA3216-301T4 MA3216-601T4 MA3216-102T4 MA3216-500S4 MA3216-800S4 MA3216-121S4 MA3216-201S4 MA3216-301S4 60 80 120 200 300 470 600 1000 60 120 200 300 600 1000 50 80 120 200 300 0.12 0.15 0.20 0.30 0.45 0.45 0.50 0.80 0.12 0.20 0.30 0.45 0.50 0.80 0.20 0.25 0.25 0.30 0.40 200 150 100 100 100 100 100 100 200 200 150 150 100 50 200 200 200 200 200 General Specifications Operating Temperature ...................................-55 °C to +125 °C Storage Temperature ..-55 °C to +125 °C Storage Condition ......................+40 °C max. at 70 % RH Impedance Tolerance....................±25 % Reflow Soldering ......................230 ˚C, 10 seconds max. Resistance to Soldering Heat ...............................260 ˚C, 10 seconds Model Designator M4 ...............................High Impedance T4 ........................................Low Speed S4 .......................................High Speed Rated Current ..................Based on max. temperature rise of +40 °C Terminal Strength (Force “F” applied for 30 seconds) 3216 Series ............................1.2 F (Kg) Materials Core Material .................................Ferrite Internal Conductor...............................Ag Terminal .....................................Ag/Ni/Sn Electrical Specifications (continued) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 177 Surface Mount Inductor MA Series ChipChip Ferrite BeadCapability Arrays Matrix Electrical Specifications (Continued) 178 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Surface Mount Inductor MA Series ChipChip Ferrite BeadCapability Arrays Matrix Product Dimensions Recommended Land Pattern DIMENSIONS ARE: Recommended Soldering MM (INCHES) Reel Dimensions 3000 pcs. per reel. Gross weight: 140g. REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 179 180 IV. Through-Hole Inductors Product Capability Matrix ......................................................................................182 Product Specifications • RLB Series Radial Inductors ............................................................................183 • FSR1013 Radial Shielded Inductors ................................................................190 • PT121 Radial High Q Inductors ......................................................................191 • LPA Series Axial Power Inductors ..................................................................192 • LPV Series Radial Power Inductors ................................................................193 181 Surface Mount Chip InductorProduct Capability Matrix Matrix Through-Hole Inductors Capability Product Selection Guide NonModel RLB0608 RLB0812 RLB1014 RLB0712 RLB0912 RLB0914 RLB1314 FSR1013 PT121 LPA0618 LPA1020 LPA1226 LPV1620 LPV1823 LPV2023 182 Shielded Power Shielded Axial • • • • • • • Ind. • • • • • • • • • • • • • • • • • Radial • • • • • • Product Size (mm) High Q • • • • • • • • • Inductance Range Length Height µH 5.0 6.7 8.7 6.7 8.7 8.7 11.7 10.5 8.0 18.0 20.0 26.0 16.0 18.0 20.0 6.5 10.0 12.0 10.0 10.0 12.0 12.0 13.0 11.2 6.0 10.0 12.0 20.0 23.0 23.0 1.0 to 1000 47 to 47000 100 to 82000 10 to 560 1.5 to 1000 3.3 to 1000 3.3 to 15000 1000 to 47000 100 to 33000 10 to 1000 10 to 1000 10 to 1000 10 to 1000 10 to 1000 10 to 2000 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Four types available ■ Power supplies ■ High rated current for high current ■ DC/DC converters circuits ■ Available in E12 series ■ RoHS compliant* ■ General use RLB Series Radial Inductors General Specifications Temperature Rise ...............................................................................................................................................20 ˚C max. at rated current Operating Temperature........................................................................................................................................................-20 °C to +80 °C Storage Temperature ..........................................................................................................................................................-25 °C to +85 °C Materials Core Material.........................................................................................................................................................................Ferrite DR core Wire............................................................................................................................................................................Enameled copper wire Terminal................................................................................................................................................................................................Cu/Sn Tube ..............................................................................................................................................................Shrinkable tube 125 °C, 600 V Product Dimensions RLB0608, RLB0812, RLB1014, RLB0712, RLB0914 Series RLB0912 Series RLB1314-680K thru RLB1314-153K RLB1314-3R3M thru RLB1314-470K A B C D E F W (DIA.) Inductance Range RLB0608 5.0 ± 0.5 (.197 ± .020) 6.5 +1.0/-0.5 (.256 +.039/-.020) 28.0 ± 5.0 (1.102 ± .197) 20.0 ± 5.0 (.787 ± .197) 2.5 + 0 (.098 + 0) 2.0 ± 0.5 (.079 ± .020) 0.50 (.020) 1.0 µH — 1000 µH RLB0812 6.7 ± 0.5 (.264 ± .020) 10.0 ± 1.0 (.394 ± .039) 25.0 ± 5.0 (.984 ± .197) 18.0 ± 5.0 (.709 ± .197) 2.5 + 0 (.098 + 0) 3.0 ± 0.5 (.118 ± .020) 0.65 (.026) 47 µH — 47 mH RLB1014 8.7 ± 0.5 (.343 ± .020) 12.0 ± 1.0 (.472 ± .039) 25.0 ± 5.0 (.984 ± .197) 18.0 ± 5.0 (.709 ± .197) 2.5 + 0 (.098 + 0) 5.0 ± 0.8 (.197 ± .031) 0.65 (.026) 100 µH — 82 mH RLB0712 6.7 ± 0.5 (.264 ± .020) 10.0 ± 1.0 (.394 ± .039) 25.0 ± 5.0 (.984 ± .197) 18.0 ± 5.0 (.709 ± .197) 2.5 + 0 (.098 + 0) 3.0 ± 0.5 (.118 ± .020) 0.65 (.026) 10 µH — 560 µH RLB0912 8.7 ± 0.5 (.343 ± .020) 10.0 ± 1.0 (.394 ± .039) 5.0 ± 1.0 (.197 ± .039) — 2.5 + 0 (.098 + 0) 5.0 ± 0.8 (.197 ± .031) 0.65 (.026) 1.5 µH — 1000 µH RLB0914 8.7 ± 0.5 (.343 ± .020) 12.0 ± 1.0 (.472 ± .039) 25.0 ± 5.0 (.984 ± .197) 18.0 ± 5.0 (.709 ± .197) 2.5 + 0 (.098 + 0) 5.0 ± 0.8 (.197 ± .031) 0.65 (.026) 3.3 µH — 1000 µH 11.7 ± 0.8 (.461 ± .031) 12.0 ± 1.0 (.472 ± .039) 15.0 ± 5.0 (.591 ± .197) — 2.5 + 0 (.098 + 0) 9.0 ± 1.0 (.354 ± .039) Per Specs. 3. 3µH — 47 µH 11.7 ± 0.8 (.461 ± .031) 12.0 ± 1.0 (.472 ± .039) 15.0 ± 5.0 (.591 ± .197) — 2.5 + 0 (.098 + 0) 7.0 ± 0.8 (.276 ± .031) 0.80 (.031) 68 µH — 15 mH Series RLB1314 DIMENSIONS ARE: *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) 183 Surface Mount Chip Inductors Inductor Capability Matrix RLB Series Radial Electrical Schematic Typical Part Marking Inductance Code: - First two digits are significant - Third digit represents the number of zeroes to follow • = Start RLB0608 Series Electrical Characteristics BOURNS Part No. RLB0608-1R0ML RLB0608-1R2ML RLB0608-1R5ML RLB0608-1R8ML RLB0608-2R2ML RLB0608-2R7ML RLB0608-3R3ML RLB0608-3R9ML RLB0608-4R7ML RLB0608-5R6KL RLB0608-6R8KL RLB0608-8R2KL RLB0608-100KL RLB0608-120KL RLB0608-150KL RLB0608-180KL RLB0608-220KL RLB0608-270KL RLB0608-330KL RLB0608-390KL RLB0608-470KL RLB0608-560KL RLB0608-680KL RLB0608-820KL RLB0608-101KL RLB0608-121KL RLB0608-151KL RLB0608-181KL RLB0608-221KL RLB0608-271KL RLB0608-331KL RLB0608-391KL RLB0608-471KL RLB0608-561KL RLB0608-681KL RLB0608-821KL RLB0608-102KL Inductance (µH) 1.0 ± 20 % 1.2 ± 20 % 1.5 ± 20 % 1.8 ± 20 % 2.2 ± 20 % 2.7 ± 20 % 3.3 ± 20 % 3.9 ± 20 % 4.7 ± 20 % 5.6 ± 10 % 6.8 ± 10 % 8.2 ± 10 % 10.0 ± 10 % 12.0 ± 10 % 15.0 ± 10 % 18.0 ± 10 % 22.0 ± 10 % 27.0 ± 10 % 33.0 ± 10 % 39.0 ± 10 % 47.0 ± 10 % 56.0 ± 10 % 68.0 ± 10 % 82.0 ± 10 % 100.0 ± 10 % 120.0 ± 10 % 150.0 ± 10 % 180.0 ± 10 % 220.0 ± 10 % 270.0 ± 10 % 330.0 ± 10 % 390.0 ± 10 % 470.0 ± 10 % 560.0 ± 10 % 680.0 ± 10 % 820.0 ± 10 % 1000.0 ± 10 % Q ref. 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 50 50 50 50 50 50 50 50 50 50 50 45 45 45 45 55 55 55 55 55 Test freq. (MHz) L, Q 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 SRF (MHz) min. 105.0 90.0 75.0 70.0 65.0 60.0 50.0 45.0 40.0 35.0 30.0 25.0 20.0 15.0 13.0 11.0 10.0 9.0 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.8 4.4 4.2 3.8 3.6 3.3 3.0 2.8 2.4 2.2 2.0 1.8 RDC (ohms) max. 0.10 0.15 0.20 0.22 0.24 0.27 0.30 0.30 0.35 0.35 0.40 0.40 0.45 0.50 0.55 0.60 0.65 0.75 0.85 0.90 1.00 1.20 1.30 1.50 1.70 1.90 2.10 2.30 2.50 2.75 4.68 6.00 6.50 8.50 9.00 9.60 11.50 IDC (mA) max. 1030 980 920 880 830 790 750 720 670 640 620 590 550 530 500 480 460 430 410 390 370 350 340 320 305 290 275 235 200 180 165 150 140 135 125 120 100 Packaging: 800 pieces per bag 184 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Surface Mount Chip Inductors Inductor Capability Matrix RLB Series Radial RLB0812 Series Electrical Characteristics BOURNS Part No. RLB0812-470KL RLB0812-560KL RLB0812-680KL RLB0812-820KL RLB0812-101KL RLB0812-121KL RLB0812-151KL RLB0812-181KL RLB0812-221KL RLB0812-271KL RLB0812-331KL RLB0812-391KL RLB0812-471KL RLB0812-561KL RLB0812-681KL RLB0812-821KL RLB0812-102KL RLB0812-122KL RLB0812-152KL RLB0812-182KL RLB0812-222KL RLB0812-272KL RLB0812-332KL RLB0812-392KL RLB0812-472KL RLB0812-562KL RLB0812-682KL RLB0812-822KL RLB0812-103KL RLB0812-123KL RLB0812-153KL RLB0812-183KL RLB0812-223KL RLB0812-273KL RLB0812-333KL RLB0812-393KL RLB0812-473KL Inductance (µH) 47 ± 10 % 56 ± 10 % 68 ± 10 % 82 ± 10 % 100 ± 10 % 120 ± 10 % 150 ± 10 % 180 ± 10 % 220 ± 10 % 270 ± 10 % 330 ± 10 % 390 ± 10 % 470 ± 10 % 560 ± 10 % 680 ± 10 % 820 ± 10 % 1000 ± 10 % 1200 ± 10 % 1500 ± 10 % 1800 ± 10 % 2200 ± 10 % 2700 ± 10 % 3300 ± 10 % 3900 ± 10 % 4700 ± 10 % 5600 ± 10 % 6800 ± 10 % 8200 ± 10 % 10000 ± 10 % 12000 ± 10 % 15000 ± 10 % 18000 ± 10 % 22000 ± 10 % 27000 ± 10 % 33000 ± 10 % 39000 ± 10 % 47000 ± 10 % Q ref. 30 30 30 30 45 45 45 45 45 45 45 45 45 45 45 45 45 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 Test freq. (MHz) L, Q 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.0796 0.0796 0.0796 0.0796 0.0796 0.0796 0.0796 0.0796 0.0796 SRF (MHz) min. 6.00 5.50 5.00 4.50 4.20 3.60 3.40 3.20 3.00 2.80 2.50 2.30 2.20 2.00 1.70 1.50 1.40 1.10 0.90 0.80 0.75 0.70 0.60 0.55 0.50 0.48 0.44 0.40 0.36 0.32 0.30 0.28 0.24 0.20 0.16 0.13 0.10 RDC (ohms) max. 0.40 0.45 0.50 0.50 0.60 0.70 0.90 1.00 1.20 1.40 1.60 1.80 2.00 2.50 2.90 3.10 3.90 4.40 6.00 7.00 8.00 9.00 12.00 14.00 16.00 18.00 24.00 30.00 39.00 46.00 54.00 76.00 92.00 102.00 140.00 150.00 162.00 IDC (mA) max. 450 400 360 340 320 300 280 260 240 220 200 180 160 150 140 130 120 110 100 90 80 70 60 55 50 45 40 36 34 32 30 27 25 22 20 18 16 Packaging: 400 pieces per bag Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 185 Surface Mount Chip Inductors Inductor Capability Matrix RLB Series Radial RLB1014 Series Electrical Characteristics BOURNS Part No. RLB1014-101KL RLB1014-121KL RLB1014-151KL RLB1014-181KL RLB1014-221KL RLB1014-271KL RLB1014-331KL RLB1014-391KL RLB1014-471KL RLB1014-561KL RLB1014-681KL RLB1014-821KL RLB1014-102KL RLB1014-122KL RLB1014-152KL RLB1014-182KL RLB1014-222KL RLB1014-272KL RLB1014-332KL RLB1014-392KL RLB1014-472KL RLB1014-562KL RLB1014-682KL RLB1014-822KL RLB1014-103KL RLB1014-123KL RLB1014-153KL RLB1014-183KL RLB1014-223KL RLB1014-273KL RLB1014-333KL RLB1014-393KL RLB1014-473KL RLB1014-563KL RLB1014-683KL RLB1014-823KL Inductance (µH) 100 ± 10 % 120 ± 10 % 150 ± 10 % 180 ± 10 % 220 ± 10 % 270 ± 10 % 330 ± 10 % 390 ± 10 % 470 ± 10 % 560 ± 10 % 680 ± 10 % 820 ± 10 % 1000 ± 10 % 1200 ± 10 % 1500 ± 10 % 1800 ± 10 % 2200 ± 10 % 2700 ± 10 % 3300 ± 10 % 3900 ± 10 % 4700 ± 10 % 5600 ± 10 % 6800 ± 10 % 8200 ± 10 % 10000 ± 10 % 12000 ± 10 % 15000 ± 10 % 18000 ± 10 % 22000 ± 10 % 27000 ± 10 % 33000 ± 10 % 39000 ± 10 % 47000 ± 10 % 56000 ± 10 % 68000 ± 10 % 82000 ± 10 % Q ref. 45 45 45 45 40 40 40 40 35 35 35 35 50 50 50 50 50 50 50 50 45 45 40 40 50 50 50 45 45 45 45 40 35 35 35 30 Test freq. (KHz) L, Q 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 79.6 79.6 79.6 79.6 79.6 79.6 79.6 79.6 79.6 79.6 79.6 79.6 SRF (MHz) min. 3.20 3.00 2.80 2.50 2.10 2.00 1.95 1.85 1.55 1.30 1.15 1.00 0.90 0.80 0.70 0.60 0.55 0.50 0.45 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.18 0.17 0.16 0.15 0.14 0.12 RDC (ohms) max. 0.85 0.95 1.05 1.15 1.30 1.50 1.70 1.85 2.30 2.55 2.85 3.10 4.10 4.70 5.80 7.40 8.40 9.60 10.50 12.00 14.00 16.00 18.00 24.50 32.00 36.00 48.00 52.00 58.00 62.00 90.00 100.00 150.00 200.00 220.00 240.00 IDC (mA) max. 350 330 310 300 280 260 240 230 210 200 190 180 160 150 130 115 110 95 80 70 65 60 55 50 45 40 35 30 28 26 24 22 20 18 16 14 Packaging: 150 pieces per bag 186 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Surface Mount Chip Inductors Inductor Capability Matrix RLB Series Radial RLB0712 Series Electrical Characteristics BOURNS Part No. RLB0712-100KL RLB0712-120KL RLB0712-150KL RLB0712-180KL RLB0712-220KL RLB0712-270KL RLB0712-330KL RLB0712-390KL RLB0712-470KL RLB0712-560KL RLB0712-680KL RLB0712-820KL RLB0712-101KL RLB0712-121KL RLB0712-151KL RLB0712-181KL RLB0712-221KL RLB0712-271KL RLB0712-331KL RLB0712-391KL RLB0712-471KL RLB0712-561KL Inductance (µH) 10 ± 10 % 12 ± 10 % 15 ± 10 % 18 ± 10 % 22 ± 10 % 27 ± 10 % 33 ± 10 % 39 ± 10 % 47 ± 10 % 56 ± 10 % 68 ± 10 % 82 ± 10 % 100 ± 10 % 120 ± 10 % 150 ± 10 % 180 ± 10 % 220 ± 10 % 270 ± 10 % 330 ± 10 % 390 ± 10 % 470 ± 10 % 560 ± 10 % Test freq. (Hz) Q ref. 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 L 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k Q ref. 30 30 30 30 30 60 50 50 45 40 35 55 40 30 25 25 25 55 L 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k Q 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M SRF (MHz) min. 16.0 12.0 10.0 10.0 9.0 8.0 7.0 6.0 6.0 5.0 5.0 5.0 4.0 4.0 3.5 3.0 3.0 2.5 2.5 2.0 2.0 2.0 RDC IDC (ohms) max. (mA) max. 0.07 1100 0.08 1000 0.09 900 0.10 750 0.12 700 0.13 650 0.15 600 0.16 550 0.18 450 0.21 400 0.24 360 0.35 340 0.40 320 0.45 300 0.50 280 0.75 260 0.90 240 1.00 220 1.10 200 1.20 180 1.50 160 1.80 150 Packaging: 400 pieces per bag SRF (MHz) min. 78.0 63.0 50.0 41.0 33.0 27.0 21.0 17.0 13.0 11.0 9.0 7.2 5.7 4.5 3.6 2.9 2.3 1.9 RDC (ohms) max. 0.008 0.010 0.018 0.022 0.028 0.043 0.056 0.086 0.140 0.170 0.280 0.330 0.560 0.720 1.100 1.700 2.300 4.300 RLB0912 Series Electrical Characteristics BOURNS Part No. RLB0912-1R5ML RLB0912-2R2ML RLB0912-3R3ML RLB0912-4R7ML RLB0912-6R8ML RLB0912-100KL RLB0912-150KL RLB0912-220KL RLB0912-330KL RLB0912-470KL RLB0912-680KL RLB0912-101KL RLB0912-151KL RLB0912-221KL RLB0912-331KL RLB0912-471KL RLB0912-681KL RLB0912-102KL Inductance (µH) 1.5 ± 20 % 2.2 ± 20 % 3.3 ± 20 % 4.7 ± 20 % 6.8 ± 20 % 10.0 ± 10 % 15.0 ± 10 % 22.0 ± 10 % 33.0 ± 10 % 47.0 ± 10 % 68.0 ± 10 % 100.0 ± 10 % 150.0 ± 10 % 220.0 ± 10 % 330.0 ± 10 % 470.0 ± 10 % 680.0 ± 10 % 1000.0 ± 10 % Test freq. (Hz) Q 7.960 M 7.960 M 7.960 M 7.960 M 7.960 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 2.520 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M 0.796 M 0.252 M IDC (A) max. 5.4 4.5 3.6 3.1 2.5 2.1 1.7 1.4 1.1 0.96 0.79 0.66 0.53 0.44 0.36 0.30 0.25 0.20 Packaging: 300 pieces per bag; available in ammo-pak (use Model RLH0912) - 1000 pieces per box Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 187 Surface Mount Chip Inductors Inductor Capability Matrix RLB Series Radial RLB0914 Series Electrical Characteristics BOURNS Part No. RLB0914-3R3ML RLB0914-4R7ML RLB0914-6R8ML RLB0914-100KL RLB0914-120KL RLB0914-150KL RLB0914-180KL RLB0914-220KL RLB0914-270KL RLB0914-330KL RLB0914-390KL RLB0914-470KL RLB0914-560KL RLB0914-680KL RLB0914-820KL RLB0914-101KL RLB0914-121KL RLB0914-151KL RLB0914-181KL RLB0914-221KL RLB0914-271KL RLB0914-331KL RLB0914-391KL RLB0914-471KL RLB0914-561KL RLB0914-681KL RLB0914-821KL RLB0914-102KL 188 Inductance (µH) 3.3 ± 20 % 4.7 ± 20 % 6.8 ± 20 % 10.0 ± 10 % 12.0 ± 10 % 15.0 ± 10 % 18.0 ± 10 % 22.0 ± 10 % 27.0 ± 10 % 33.0 ± 10 % 39.0 ± 10 % 47.0 ± 10 % 56.0 ± 10 % 68.0 ± 10 % 82.0 ± 10 % 100.0 ± 10 % 120.0 ± 10 % 150.0 ± 10 % 180.0 ± 10 % 220.0 ± 10 % 270.0 ± 10 % 330.0 ± 10 % 390.0 ± 10 % 470.0 ± 10 % 560.0 ± 10 % 680.0 ± 10 % 820.0 ± 10 % 1000.0 ± 10 % Q ref. 20 20 20 50 50 50 40 40 40 40 30 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 40 Test freq. (MHz) L, Q 7.960 7.960 7.960 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 SRF (MHz) min. 70.0 50.0 30.0 20.0 15.0 10.0 9.5 9.0 8.5 8.0 7.0 6.0 5.0 4.5 4.0 3.5 3.0 2.8 2.6 2.4 2.2 2.0 1.9 1.8 1.7 1.6 1.5 1.3 RDC IDC (ohms) max. (A) max. 0.027 3.60 0.033 3.20 0.039 3.00 0.048 2.70 0.055 2.50 0.060 2.40 0.065 2.30 0.090 1.90 0.110 1.80 0.120 1.70 0.130 1.60 0.140 1.50 0.200 1.30 0.210 1.20 0.230 1.10 0.280 1.00 0.320 0.90 0.370 0.80 0.540 0.75 0.600 0.70 0.680 0.65 0.760 0.60 0.850 0.55 1.300 0.50 1.400 0.45 1.600 0.40 1.800 0.35 2.100 0.30 Packaging: 200 pieces per bag Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Surface Mount Chip Inductors Inductor Capability Matrix RLB Series Radial RLB1314 Series Electrical Characteristics Test freq. (Hz) BOURNS Part No. Inductance (µH) Q Ref. L Q SRF RDC IDC (MHz) Typ. (ohms) max. (A) max. RLB1314-3R3ML 3.3 ± 20 % 90 1k 7.96 M 59.00 0.008 RLB1314-4R7ML 4.7 ± 20 % 100 1k 7.96 M 45.00 RLB1314-6R8ML 6.8 ± 20 % 80 1k 7.96 M RLB1314-100ML 10.0 ± 20 % 140 1k RLB1314-150ML 15.0 ± 20 % 120 RLB1314- 220KL 22.0 ± 10 % RLB1314-330KL W Dia. F 5.600 0.8 ± 0.05 (.032 ± .002) 9.0 ± 1.0 (.354 ± .04) 0.009 4.700 0.8 ± 0.05 (.032 ± .002) 9.0 ± 1.0 (.354 ± .04) 34.00 0.012 3.900 0.7 ± 0.05 (.028 ± .002) 9.0 ± 1.0 (.354 ± .04) 2.52 M 26.00 0.015 3.200 0.7 ± 0.05 (.028 ± .002) 9.0 ± 1.0 (.354 ± .04) 1k 2.52 M 19.00 0.019 2.600 0.7 ± 0.05 (.028 ± .002) 9.0 ± 1.0 (.354 ± .04) 110 1k 2.52 M 14.00 0.026 2.200 0.7 ± 0.05 (.028 ± .002) 9.0 ± 1.0 (.354 ± .04) 33.0 ± 10 % 100 1k 2.52 M 10.00 0.045 1.800 0.6 ± 0.05 (.024 ± .002) 9.0 ± 1.0 (.354 ± .04) RLB1314-470KL 47.0 ± 10 % 90 1k 2.52 M 8.30 0.056 1.500 0.6 ± 0.05 (.024 ± .002) 9.0 ± 1.0 (.354 ± .04) RLB1314-680KL 68.0 ± 10 % 80 1k 2.52 M 6.70 0.092 1.200 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-101KL 100.0 ± 10 % 70 1k 796 K 5.40 0.120 1.000 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-151KL 150.0 ± 10 % 70 1k 796 K 4.30 0.200 0.820 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-221KL 220.0 ± 10 % 40 1k 796 K 3.40 0.250 0.680 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-331KL 330.0 ± 10 % 40 1k 796 K 2.70 0.420 0.550 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-471KL 470.0 ± 10 % 30 1k 796 K 2.30 0.510 0.460 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-681KL 680.0 ± 10 % 30 1k 796 K 1.90 0.790 0.380 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-102KL 1000.0 ± 10 % 40 1k 252 K 1.60 1.300 0.310 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-152KL 1500.0 ± 10 % 30 1k 252 K 1.30 1.700 0.250 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-222KL 2200.0 ± 10 % 60 1k 252 K 1.10 2.900 0.210 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-332KL 3300.0 ± 10 % 50 1k 252 K 0.90 3.700 0.170 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-472KL 4700.0 ± 10 % 50 1k 252 K 0.76 5.600 0.140 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-682KL 6800.0 ± 10 % 60 1k 252 K 0.65 9.400 0.120 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-103KL 10000.0 ± 10 % 80 1k 79.6 K 0.53 12.000 0.100 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) RLB1314-153KL 15000.0 ± 10 % 70 1k 79.6 K 0.41 15.000 0.082 0.8 ± 0.05 (.032 ± .002) 7.0 ± 0.8 (.276 ± .032) DIMENSIONS ARE: MM (INCHES) Packaging: RLB1314 (3R3M to 470K) = 150 pieces per bag; RLB1314 (680K to 153K) = 130 pieces per bag. REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 189 Features ■ High inductance up to 47mH ■ High Q level ■ RoHS compliant* FSR1013 Series - Radial Shielded Inductors Materials Core ....................................................................................................................................................................................Ferrite POT core Wire ............................................................................................................................................................................Enameled copper wire Bobbin ..............................................................................................................................................................................................Phenolic Terminal ................................................................................................................................................................................................Cu/Sn Adhesive ......................................................................................................................................................................................Epoxy resin Temperature Rise ..............................................................................................................................................40 °C max. at rated current Packaging ..........................................................................................................................................................................182 pcs. per bag Dimensions MM (INCHES) DIMENSIONS ARE: Electrical Characteristics BOURNS Part No. FSR 1013-102KL FSR 1013-122KL FSR 1013-152KL FSR 1013-182KL FSR 1013-222KL FSR 1013-272KL FSR 1013-332KL FSR 1013-392KL FSR 1013-472KL FSR 1013-562KL FSR 1013-682KL FSR 1013-822KL FSR 1013-103KL FSR 1013-123KL FSR 1013-153KL FSR 1013-183KL FSR 1013-223KL FSR 1013-273KL FSR 1013-333KL FSR 1013-393KL FSR 1013-473KL 190 Inductance (mH) 1.0 ± 10 % 1.2 ± 10 % 1.5 ± 10 % 1.8 ± 10 % 2.2 ± 10 % 2.7 ± 10 % 3.3 ± 10 % 3.9 ± 10 % 4.7 ± 10 % 5.6 ± 10 % 6.8 ± 10 % 8.2 ± 10 % 10.0 ± 10 % 12.0 ± 10 % 15.0 ± 10 % 18.0 ± 10 % 22.0 ± 10 % 27.0 ± 10 % 33.0 ± 10 % 39.0 ± 10 % 47.0 ± 10 % Q min. 40 40 40 40 40 40 30 30 30 30 20 20 50 50 50 50 40 40 40 30 30 Test freq. (Hz) L 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k 1k Q 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 252.0 k 79.6 k 79.6 k 79.6 k 79.6 k 79.6 k 79.6 k 79.6 k 79.6 k 79.6 k SRF (kHz) min. 740 670 500 480 410 390 350 340 320 310 280 260 240 210 190 180 140 130 125 120 110 RDC (Ω) max. 4.0 5.0 6.0 7.0 10.0 11.0 12.0 13.0 23.0 25.0 30.0 32.0 35.0 50.0 58.0 63.0 90.0 100.0 115.0 185.0 205.0 Rated Curr. IDC (mA) 150 140 130 115 100 95 85 80 70 65 60 50 45 40 38 35 30 28 25 23 22 REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. ■ Available with 3M tape (#56) for outer Features covering (standard version) or heat shrink tube (“S” version) ■ Low cost, high quality ■ Excellent temperature stability ■ High currents Applications ■ E12 series 100 µH to 33mH ■ Telecommunications ■ Open construction ■ RoHS compliant* PT121 Series - Radial High Q Inductors Electrical Specifications (@ 25 °C) Part Number PT12110L PT12111L PT12112L PT12113L PT12114L PT12115L PT12116L PT12117L PT12118L PT12119L PT12120L PT12121L PT12123L PT12124L PT12125L PT12126L PT12127L PT12128L PT12129L PT12130L PT12131L PT12132L PT12133L PT12134L PT12135L PT12136L PT12137L PT12138L PT12139L PT12140L Product Dimensions Q (ref.) Measure frequency Q and Inductance kHz Self Resonant frequency MHz min. (2) DCR Ω (max.) Rated I DC mA (max.) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.60 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.00 12.00 15.00 18.00 22.00 27.00 33.00 80 80 80 80 80 80 80 80 80 80 80 90 90 90 90 90 90 90 90 90 90 90 90 100 100 100 100 100 100 100 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 796.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 79.6 79.6 79.6 79.6 79.6 79.6 79.6 5.30 4.50 3.80 3.30 2.90 2.60 2.30 2.10 1.90 1.70 1.60 1.30 1.20 1.10 1.00 0.90 0.80 0.70 0.70 0.60 0.60 0.50 0.50 0.40 0.40 0.40 0.30 0.30 0.30 0.30 2.0 2.0 2.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 4.0 6.0 9.0 9.0 9.0 13.0 13.0 13.0 13.0 18.0 18.0 26.0 26.0 40.0 40.0 60.0 60.0 80.0 80.0 80.0 200 200 200 200 200 200 200 200 200 200 200 150 150 150 100 100 100 100 50 50 50 50 50 40 40 40 30 30 30 30 NOTES: (1) Version J: Inductance Value ±5 % is also available. Please add ’J’ to above part number if Inductance Value ±5 % is required (i.e. PT12110J) (2) PT121 Series Inductance Typical (1) mH ±10 % PT121S Series Recommended PCB Layout Material Terminal..........................................Cu/Sn Measurements are made at 25 °C using HP4277A LCZ Meter Self Resonant Frequency is for reference only. DIMENSIONS: MM (INCHES) TOLERANCE: ± 0.25 (0.010) Electrical Schematic Full encapsulated units with Epoxy Resin are also available. Please consult factory for details. “S” Version uses heat shrink tube for outer cover. Diameter and height are slightly higher than standard version. (See product dimensions.) REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 191 Features Applications ■ High current up to 5 A ■ ■ RoHS compliant* ■ ■ DC/DC onverters Power supplies General use LPA Series Axial Power Inductors General Specifications Temperature Rise ..................45 ˚C max. at rated current Operating Temperature -20 °C to +80 °C Storage Temperature ..-25 °C to +85 °C Product Dimensions Electrical Schematic Materials Core Material ..................Ferrite DR core Wire ....................Enameled copper wire Terminal ........................................Cu/Sn Tube........Shrinkable tube 125 °C, 600 V DIMENSIONS ARE: MM (INCHES) Electrical Characteristics and Product Dimensions BOURNS Part No. 192 Inductance (µH) 1KHz RDC (Ω) max. IDC (A) max. LPA0618-100KL 10 ± 10 % 0.075 2.00 LPA0618-250KL 25 ± 10 % 0.150 1.20 LPA0618-500KL 50 ± 10 % 0.200 0.80 LPA0618-101KL 100 ± 10 % 0.300 0.60 LPA0618-251KL 250 ± 10 % 1.000 0.40 LPA0618-501KL 500 ± 10 % 2.000 0.25 LPA0618-102KL 1000 ± 10 % 3.000 0.20 LPA1020-100KL 10 ± 10 % 0.050 3.50 LPA1020-250KL 25 ± 10 % 0.085 2.50 LPA1020-500KL 50 ± 10 % 0.120 2.00 LPA1020-101KL 100 ± 10 % 0.180 1.40 LPA1020-251KL 250 ± 10 % 0.500 0.80 LPA1020-501KL 500 ± 10 % 1.000 0.60 LPA1020-102KL 1000 ± 10 % 2.200 0.40 LPA1226-100KL 10 ± 10 % 0.030 5.0 LPA1226-250KL 25 ± 10 % 0.045 4.0 LPA1226-500KL 50 ± 10 % 0.080 3.0 LPA1226-101KL 100 ± 10 % 0.125 2.0 LPA1226-251KL 250 ± 10 % 0.300 1.2 LPA1226-501KL 500 ± 10 % 0.500 0.8 LPA1226-102KL 1000 ± 10 % 1.200 0.6 A max. Dimensions B max. W dia. 6.0 (.236) 6.0 (.236) 6.0 (.236) 6.0 (.236) 6.0 (.236) 6.0 (.236) 6.0 (.236) 10.0 (.394) 10.0 (.394) 10.0 (.394) 10.0 (.394) 10.0 (.394) 10.0 (.394) 10.0 (.394) 12.0 (.472) 12.0 (.472) 12.0 (.472) 12.0 (.472) 12.0 (.472) 12.0 (.472) 12.0 (.472) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 26.0 (1.024) 26.0 (1.024) 26.0 (1.024) 26.0 (1.024) 26.0 (1.024) 26.0 (1.024) 26.0 (1.024) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.65 ± 0.05 (.026 ± .002) 0.8 ± 0.05 (.031 ± .002) 0.8 ± 0.05 (.031 ± .002) 0.8 ± 0.05 (.031 ± .002) 0.8 ± 0.05 (.031 ± .002) 0.8 ± 0.05 (.031 ± .002) 0.8 ± 0.05 (.031 ± .002) 0.8 ± 0.05 (.031 ± .002) REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ High current up to 10 A ■ ■ RoHS compliant* ■ DC/DC converters Power supplies LPV Series Radial Power Inductors General Specifications Temperature Rise ..................45 ˚C max. at rated current Operating Temperature -20 °C to +80 °C Storage Temperature ..-25 °C to +85 °C Product Dimensions Electrical Schematic Materials Core Material ..................Ferrite DR core Wire ....................Enameled copper wire Terminal ........................................Cu/Sn Tube........Shrinkable tube 125 °C, 600 V DIMENSIONS ARE: MM (INCHES) Electrical Characteristics and Product Dimensions BOURNS Part No. Inductance (µH) 1KHz RDC (Ω) max. IDC (A) max. LPV1620-100ML 10 ± 20 % 0.024 5.0 LPV1620-250KL 25 ± 10 % 0.040 4.0 50 ± 10 % 0.060 3.0 LPV1620-101KL 100 ± 10 % 0.090 2.0 LPV1620--251KL 250 ± 10 % 0.180 1.5 LPV1620-501KL 500 ± 10 % 0.400 1.0 LPV1620-102KL 1000 ± 10 % 0.800 0.7 LPV1823-100M 10 ± 20 % 0.009 8.0 LPV1823-250KL 25 ± 10 % 0.022 6.0 LPV1823-500KL 50 ± 10 % 0.036 4.0 LPV1823-101KL 100 ± 10 % 0.090 3.0 LPV1823-251KL 250 ± 10 % 0.150 2.0 LPV1823-501KL 500 ± 10 % 0.300 1.2 LPV1823-102KL 1000 ± 10 % 0.600 1.0 LPV2023-100M 10 ± 20 % 0.008 10.0 LPV2023-500KL 50 ± 10 % 0.032 5.0 LPV2023-101KL 100 ± 10 % 0.060 4.0 LPV2023-251KL 250 ± 10 % 0.140 2.5 LPV2023-501KL 500 ± 10 % 0.280 1.5 LPV2023-102KL 1000 ± 10 % 0.550 1.2 LPV2023-202KL 2000 ± 10 % 1.200 0.8 LPV1620-500KL REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. A max. 16.0 (.630) 16.0 (.630) 16.0 (.630) 16.0 (.630) 16.0 (.630) 16.0 (.630) 16.0 (.630) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 18.0 (.709) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) Dimensions B max. F 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 20.0 (.787) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 23.0 (.906) 8.0 ± 1.5 (.315 ± .059) 8.0 ± 1.5 (.315 ± .059) 8.0 ± 1.5 (.315 ± .059) 8.0 ± 1.5 (.315 ± .059) 8.0 ± 1.5 (.315 ± .059) 8.0 ± 1.5 (.315 ± .059) 8.0 ± 1.5 (.315 ± .059) 14.0 ± 1.5 (.551 ± .059) 14.0 ± 1.5 (.551 ± .059) 14.0 ± 1.5 (.551 ± .059) 9.0 ± 1.5 (.354 ± .059) 9.0 ± 1.5 (.354 ± .059) 9.0 ± 1.5 (.354 ± .059) 9.0 ± 1.5 (.354 ± .059) 15.5 ± 1.5 (.610 ± .059) 15.5 ± 1.5 (.610 ± .059) 15.5 ± 1.5 (.610 ± .059) 12.5 ± 1.5 (.492 ± .059) 12.5 ± 1.5 (.492 ± .059) 12.5 ± 1.5 (.492 ± .059) 12.5 ± 1.5 (.492 ± .059) W dia. 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.2 ± 0.1 (.047 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.3 ± 0.1 (.051 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 1.0 ± 0.1 (.039 ± .004) 193 194 V. Surface Mount Data Line Dual Chokes Product Capability Matrix ......................................................................................196 Product Specifications • DR221 Series Dual Chokes ..............................................................................197 • DR331 Series Dual Chokes ..............................................................................199 • DR332 Series Dual Chokes ..............................................................................202 • Model SM-73818E Dual Chokes ....................................................................205 195 Surface Mount Chip Data Inductor Line Chokes Capability ProductMatrix Capability Matrix Product Selection Guide Model L (µH) I (A) Winding Application DR221-113AE 11 0.25 Bifilar Can bus DR221-223AE 22 0.25 Bifilar Can bus DR221-333AE 33 0.2 Bifilar Can bus DR221-513AE 50 0.2 Bifilar Can bus DR221-474AE 47 0.1 Bifilar Can bus DR331-113AE 11 0.5 Bifilar Can bus DR331-253AE 25 0.5 Sector Can bus DR331-513AE 50 0.5 Sector Can bus DR331-474AE 47 0.5 Bifilar Can bus DR331-105AE 100 0.5 Bifilar Can bus DR331-475AE 470 0.2 Bifilar Can bus DR332-113E 11 0.5 Bifilar Can bus DR332-253E 25 0.5 Sector Can bus DR332-513E 51 0.5 Sector Can bus DR332-474E 470 0.5 Bifilar Telecom DR332-475E 4700 0.2 Bifilar Telecom SM73818AE 51 0.5 Bifilar Can bus 196 Features Applications ■ Lead free ■ For the suppression of EMI in data and signal lines, e.g. CAN Bus ■ RoHS compliant* ■ Sector windings ■ Wide frequency range over 500 MHz ■ Rated current 0.1 to .025 A ■ High quality toroidal core DR221 Series Surface Mount Data Line Chokes Electrical Characteristics (@ 25 °C) L1, L2 Bourns @ 10kHz, Part 0.1 Vrms Number (µH) DR221-113AE 11.0 +50 %/-30 % Freq. Range (MHz) 100~500 DR221-223AE 22.0 +50 %/-30 % 40~300 900 0.23 0.17 250 DR221-333AE 33.0 +50 %/-30 % 30~250 1000 0.27 0.20 200 DR221-513AE 50.0 +50 %/-30 % 20~150 1400 0.32 0.24 200 DR221-474AE 470 +50 %/-30 % 2.5~60 1100 0.35 0.28 100 Product Dimensions RDC (Ω) Rated Impedance (Each Winding) Current Min. (Ω) Max. Typ. (mA) 450 0.18 0.13 250 Recommended PCB Layout Rated Voltage ........50 Vdc/100 Vac (ref.) Hipot (1 sec.)..........500 Vac/60 Hz, 3 mA Operating Temperature ....-40 to +125 °C Storage Temperature ......-40 to +125 °C Temperature Rise ..................25 °C max. at rated current Resistance to Solder Heat ......................................260 °C 10 sec. Core ..............................................Ferrite Wire ......Enameled copper wire (Class F) Base ................................LCP (UL 94V-0) Terminal ....................................Cu/Ni/Sn Adhesive................................Epoxy resin Weight ................................................2 g Packaging ....................500 pcs. per reel Schematic DIMENSIONS: MM (INCHES) How to Order DR221 - 513 AE Model Value/Tolerance See Model-Value Table Termination AE = Cu/Ni/Sn (Lead Free) Solder Profile Typical Part Marking *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 197 Surface Mount Chip Inductor Capability Matrix DR221 Series Surface Mount Data Line Chokes Packaging Specifications DIMENSIONS: MM (INCHES) 500 PCS. PER REEL Impedance vs. Frequency 198 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Lead free ■ For the suppression of EMI in data and signal lines, e.g. CAN Bus ■ RoHS compliant* ■ Bifilar or sector windings ■ Wide frequency range over 1000MHz ■ Rated current 0.2 to 0.5A ■ Open construction is more economical than DR332 Series DR331 Series Surface Mount Data Line Chokes Electrical Characteristics (@ 25 °C) Bourns Part Number L (1-4) @ 100 kHz, 0.1 Vrms (µH) LL (1-4) @ 100 kHz, 0.1 Vrms (Typ.) (2-3 Short) RDC (Ω) (Winding) Max. Rated Current Max. Winding DR331-113BE 11.0 +25 % 0.05 µH 0.12 0.5 A Bifilar DR331-253AE 25.0 +25 % 1.50 µH 0.20 0.5 A Sector DR331-513AE 51.0 +25 % 2.00 µH 0.30 0.5 A Sector DR331-513BE 51.0 +25 % 2.00 µH 0.30 0.5 A Bifilar DR331-104AE 100.0 +25 % 0.85 µH 0.10 0.5 A Sector DR331-474BE 470.0 +25 % 0.28 µH 0.28 0.5 A Bifilar DR331-105BE 1000.0 +25 % 0.29 µH 0.40 0.5 A Bifilar DR331-475BE 4700.0 +25 % 0.30 µH 0.70 0.2 A Bifilar Rated Voltage ..................80 Vdc/42 Vac Hipot (1 sec.)..........250 Vac/60 Hz, 3 mA *Operating Temperature ..-40 to +135 °C *Storage Temperature ......-40 to +135 °C Temperature Rise ..................30 °C max. at rated current Resistance to Solder Heat ......................................260 °C 10 sec. Core ..............................................Ferrite Wire ......Enameled copper wire (Class F) Base ............................PPHS (UL 94V-0) Terminal ....................................Cu/Ni/Sn Adhesive................................Epoxy resin Packaging ..................1500 pcs. per reel How to Order Product Dimensions Recommended PCB Layout DR331 - 253 A E Model Value Code See Model-Value Table Winding Type A = Sector B = Bifilar Terminal E = Cu/Ni/Sn (Lead Free) DIMENSIONS: MM (INCHES) Schematic Typical Part Marking *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 199 DR331 Series Surface Mount Data Line Chokes Solder Profile Impedance vs. Frequency 200 Insertion Loss vs. Frequency Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DR331 Series Surface Mount Data Line Chokes Packaging Specifications DIMENSIONS: MM (INCHES) 1500 PCS. PER REEL REV. 06/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 201 Features Applications ■ Lead free ■ For the suppression of EMI in data and signal lines, e.g. CAN Bus ■ RoHS compliant* ■ Bifilar or sector windings ■ Wide frequency range over 1000MHz ■ Rated current 0.2 to 0.5A ■ Model DR331 recommended for new designs DR332 Series Surface Mount Data Line Chokes Electrical Characteristics (@ 25 °C) Bourns Part Number L (1-4) @ 100 kHz, 0.1 Vrms (µH) LL (1-4) @ 100 kHz, 0.1 Vrms (Typ.) (2-3 Short) RDC (Ω) (Winding) Max. (Ω) Rated Current Max. Winding DR332-113AE 11.0 +25 % 0.05 µH 0.12 0.5 A Bifilar DR332-253AE 25.0 +25 % 1.50 µH 0.20 0.5 A Sector DR332-513AE 51.0 +25 % 2.00 µH 0.30 0.5 A Sector DR332-474AE 470.0 +25 % 0.28 µH 0.28 0.5 A Bifilar DR332-105AE 1000.0 +25 % 0.29 µH 0.40 0.5 A Bifilar DR332-475AE 4700.0 +25 % 0.30 µH 0.70 0.2 A Bifilar Note: For tape and reel packaging, add “E” at the end of part number. Product Dimensions Recommended PCB Layout Rated Voltage ..................80 Vdc/42 Vac Hipot (1 sec.)..........250 Vac/60 Hz, 3 mA *Operating Temperature ..-40 to +135 °C *Storage Temperature ......-40 to +135 °C Temperature Rise ..................30 °C max. at rated current Resistance to Solder Heat ......................................260 °C 10 sec. Core ..............................................Ferrite Wire ......Enameled copper wire (Class F) Base ............................PPHS (UL 94V-0) Terminal ....................................Cu/Ni/Sn Adhesive................................Epoxy resin Packaging ..................1500 pcs. per reel *Model DR443-475: Operating Temperature ....-40 to +100 °C Storage Temperature ......-40 to +100 °C How to Order DR332 - 513 AE Model DIMENSIONS: MM (INCHES) Value Code See Model-Value Table Termination AE = Cu/Ni/Sn (Lead Free) Schematic Typical Part Marking 202 REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DR332 Series Surface Mount Data Line Chokes Solder Profile Impedance vs. Frequency REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Insertion Loss vs. Frequency 203 DR332 Series Surface Mount Data Line Chokes Packaging Specifications DIMENSIONS: MM (INCHES) 1500 PCS. PER REEL 204 REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Features Applications ■ Small surface mount component ■ For the suppression of EMI in data and signal lines, e.g., CAN Bus ■ High quality toroidal core ■ Unit height of 5.2mm max. ■ Supplied in 16 mm conductive poly- strene tape (SM73818AE) ■ Recommended for reflow solder processing SM73818AE- Dual Inductor Electrical Specifications (@ 25°C) Typical Part Marking Product Dimensions Ls (1-4)...............51µH ± 30% @ 100KHz 0.1mA Le (1-4) ....................2µH Max @ 100KHz 0.1mA [short (2-3)] Turns Ratio .................................1:1 ±2% Polarity..........................1,2@same phase Hipot.............250VDC between windings for 1 second DCR (1-4) .........................0.3 ohms max. DCR (2-3) .........................0.3 ohms max. DCR typical .....................................0.1 Operating Temperature .....-40 to +135°C Storage Temperature ........-40 to +135°C Rated Current........100mA DC @ +125°C Rated Voltage.................80VDC / 42VAC LCP Thermal Plastic .................UL 94V-0 Terminal .....................................Cu/Ni/Sn Weight ...............................................0.2g Packaging......1500 pcs. per 330mm reel Schematic MM (INCHES) DIMENSIONS: 1 4 2 3 0.25 TOLERANCE: ± (0.010) Packaging Dimensions Model SM73818AE W 16.00 (.630) P 8.00 (.315) E 1.75 (.069) F 7.50 (.296) D 1.55 (.061) REV. 05/05 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. D1 1.50 (.059) P0 4.00 (.158) P2 2.00 (.079) A0 6.22 (.245) B0 9.60 (.378) K0 5.50 (.216) t 0.40 (.015) 205 Notes 206 Notes 207 Notes 208 Worldwide Sales Offices Country Phone Fax Benelux: Brazil: China: France: Germany: Ireland/UK: Italy: Japan: Malaysia (KL Office): Malaysia (Penang Office): Singapore: Switzerland: Taiwan: UK/Ireland: USA: +41 (0)41 768 5555 +55 11 5505 0601 +86 21 64821250 +33 (0)2 5473 5151 +49 (0)69 800 78212 +44 (0)1276 691087 +41 (0)41 768 5555 +81 49 269 3204 +60 3 71183138 +60 4 6581771 +65 6348 7227 +41 (0)41 768 5555 +886 2 25624117 +44 (0)1276 691087 +1-951-781-5500 +41 (0)41 768 5510 +55 11 5505 4370 +86 21 64821249 +33 (0)2 5473 5156 +49 (0)69 800 78299 +44 (0)1276 691088 +41 (0)41 768 5510 +81 49 269 3297 +60 3 71183139 +60 4 6582771 +65 6348 1272 +41 (0)41 768 5510 +886 2 25624116 +44 (0)1276 691088 +1-951-781-5006 Non-Listed European Countries: +41 (0)41 768 5555 +41 (0)41 768 5510 Region Phone Fax Asia-Pacific: Europe: North America: +886 2 25624117 +41 (0)41 768 5555 +1-951-781-5500 +886 2 25624116 +41 (0)41 768 5510 +1-951-781-5700 Technical Assistance www.bourns.com Bourns® products are available through an extensive network of manufacturer’s representatives, agents and distributors. To obtain technical applications assistance, a quotation, or to place an order, contact a Bourns representative in your area. Specifications subject to change without notice. Actual performance in specific customer applications may differ due to the influence of other variables. Customers should verify actual device performance in their specific applications. “Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries. COPYRIGHT© 2008, BOURNS, INC. • LITHO IN U.S.A. • WAG • 05/08 • 4M/IC0827