PL IA NT Features S CO M ■ *R oH ■ ■ ■ Applications Lead free device (RoHS Compliant*) Small SC70-6L package ESD protection >25k V Protects 4 bidirectional or 5 unidirectional lines ■ ■ ■ ■ Notebook computers Cell phones Digital cameras PDAs CDSC706-T05C~T24C – TVS Diode Arrays General Information The CDSC706-T series provides ESD and EFT protection for the external ports of portable electronic devices such as cell phones, handheld electronics and personal computers. The ESD protection provided by the component enables a data port to withstand a minimum ±8 KV Contact / ±15 KV Air Discharge per the ESD test method specified in IEC 61000-4-2. The device measures 2.0 mm x 2.10 mm and is available in a SC70-6 package and intended to be mounted directly onto an FR4 printed circuit board. The Bourns® device will meet IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements in normal use. 1 6 2 5 3 4 E T E L O S B O Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Peak Pulse Power (tp = 8/20 µs)1 PPK 100 W Storage Temperature TSTG -55 to +150 °C TOPR -55 to +150 °C Operating Temperature Note: 1. See Peak Pulse Power vs. Pulse Time. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter CDSC706- Symbol Unit T05C T12C T15C T24C Breakdown Voltage Minimum @ 1 mA VBR 6 13.3 16.7 26.7 V Working Peak Voltage VWM 5 12 15 24 V ID 5 1 1 1 µA CJ 60 30 25 20 pF Leakage Current @ VWM Capacitance Typical @ 0 V, 1 MHz ESD Protection per IEC 61000-4-2 Minimum Contact Discharge Minimum Air Discharge 8 15 kV kV EFT Protection per IEC 61000-4-4 @ 5/50 ns 40 A Surge Protection per IEC 61000-4-5 @ 8/20 µs *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 12 @9A 23.8 @ 4.2 A 33.3 @3A 55.5 @ 1.8 A V CDSC706-T05C~T24C – TVS Diode Arrays Mechanical Characteristics This is a molded JEDEC SC70-6L package with lead free 100 % Sn plating on the terminations. It weighs approximately 7 mg. Product Dimensions Recommended Footprint 0.15 - 0.30 (0.006 - 0.012) 1.72 (0.068) 0.65 (0.026) 6 5 4 2.00 - 2.20 (0.078 - 0.087) 1 2 0.10 (0.004) 3 0.26 - 0.46 (0.010 - 0.018) 1.90 - 2.15 (0.074 - 0.084) 0.80 - 1.10 (0.031 - 0.043) 0.65 (0.026) 0.50 (0.020) 0.60 (0.024) DIMENSIONS = MILLIMETERS (INCHES) How To Order 1.30 (0.051) 0.08 - 0.25 (0.003 - 0.001) 1.15 - 1.35 (0.045 - 0.055) 1.30 (0.512) 0.80 - 1.00 (0.031 - 0.040) E T E L O S B O 0 - 10 ° DIMENSIONS = MILLIMETERS (INCHES) Block Diagram CD SC706 - T 05 C Common Code CD = Chip Diode Package SC706 = SC70-6L Package Model T = Transient Voltage Suppressor Working Peak Reverse Voltage 05 = 5 VWM (Volts) Suffix C = Bidirectional Diode 1 6 2 5 3 4 Typical Part Marking CDSC706-T05C CDSC706-T12C CDSC706-T15C CDSC706-T24C ........................................................................ ........................................................................ ........................................................................ ........................................................................ 05C 12C 15C 24C Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CDSC706-T05C~T24C – TVS Diode Arrays Performance Graphs Pulse Waveform IPP – Peak Pulse Current (% of IPP) Peak Pulse Power vs Pulse Time PPP – Peak Pulse Power (W) 10,000 1,000 100 W, 8/20 µs Waveform 100 10 0.1 120 Test Waveform Parameters tt = 8 µs td = 20 µs tt 100 80 et 60 40 td = t|IPP/2 20 E T E L O S B O 0 1 10 100 1,000 10,000 0 10 5 15 20 25 30 t – Time (µs) td – Pulse Duration (µs) Typical Clamping Voltage vs Peak Pulse Current Power Derating Curve 100 Peak Pulse Power 8/20 µs 80 % of Rated Power VC – Clamping Voltage - Volts 16 12 8 4 40 20 Average Power 0 0 2 0 4 6 8 10 IPP – Peak Pulse Current (Amps) 30 25 15 5 2 0.2 -5 -490.00 ns 10.00 ns 0 25 50 75 100 125 TL = Lead Temperature - °C Overshoot & Clamping Voltage 5 Volts per Division 60 510.00 ns ESD Test Pulse: 25 kilovolt, 1/30 ns (waveshape) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 150 CDSC706-T05C~T24C – TVS Diode Arrays Packaging Information The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer E T E L O S B O C Device Leader ....... ....... ....... ....... ....... ....... ....... ....... End 10 pitches (min.) W1 Start 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel — SC70-6L 2.25 ±0.10 (0.088 - 0.004) 2.34 ±0.10 (0.092 - 0.004) 1.22 ±0.10 (0.048 - 0.004) 1.55 ±0.05 (0.061 - 0.002) 178 (7.008) 50.0 Min. (1.969) 13.0 ±0.20 (0.512 - 0.008) 1.75 ±0.10 (0.069 - 0.004) 3.50 ±0.05 (0.138 - 0.002) 4.00 ±0.10 (0.157 - 0.004) 4.00 ±0.10 (0.157 - 0.004) 2.00 ±0.05 (0.079 - 0.002) 0.20 ±0.10 (0.008 - 0.004) 8.00 ±0.20 (0.315 - 0.008) 14.4 Max. (0.567) Reliable Electronic Solutions Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com 3,000 06/07 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.