SPT5204QL

Features
■
■
■
■
■
■
Powers SLICs and RSLICs
Overcurrent protection
Surface mount design
Non-isolated output
Ultraquiet outputs
Superb transient response
■
■
■
■
■
10 REN capability
Compact design
Simplifies assembly & test
Fast time-to-market
Eliminates ALEL caps
SPT5204QL SLIC Power Module
General Information
Input Specifications
Voltage ......................................10 VDC Min.
12 VDC Nom.
15 VDC Max.
Current (at 12 Vin)
No Load................................48 mA Nom.
55 mA Max.
IBAT1 = 100 mA ...................720 mA Nom.
750 mA Max.
IBAT2 = 100 mA ...................320 mA Nom.
340 mA Max.
Output Specifications
The SPT5204QL is a member of Bourns
Switch Power ringing SLIC power module
family. The output voltages provide lownoise operation for very quiet off-hook
conditions and on-hook transmissions. The
SPT5204QL is capable of 7 W total output
power, with up to 100 mA available from
each output rail.
The part is available in a surface mount
configuration. The compact design
Output Decoupling
provides a small footprint, minimizing real
estate usage on the main board.
The SPT5204QL is a robust design that
meets the electrical and environmental
specifications for powering RSLICs. By
integrating the entire power solution, the
OEM customer saves time and money in
engineering, debugging, purchasing hardto-source components, test and inventory.
Fault Protection
E
T
E
L
O
S
B
O
Power ......................................................7 W
VBAT1
Voltage .................................... -65 V Min.
-63 V Nom.
-61 V Max.
Current ..................................0 to 100 mA
10 REN (2s on, 4s off)
120 mA Min. (trip < 150 ms)
Ripple Voltage ...........................40 mV Nom.
(IBAT1 = 50 mA)
Temperature Coefficient (T -25 °C)
..........................................9 mV/°C Nom.
25 mV/°C Max.
VBAT2
Voltage (Two Outputs) ............. -25 V Min.
-24 V Nom.
-23 V Max.
Current ..................................0 to 100 mA
(50 mA each output)
Ripple Voltage ...........................20 mV Nom.
(IBAT2 = 50 mA)
Temperature Coefficient (T -25 °C)
.......................................1.2 mV/°C Nom.
4 mV/°C Max.
VBAT2 Load Regulation
(IBAT2 = 0 to 50 mA)
......................................0.5 mV/mA Nom.
1 mV/mA Max.
VBAT2 Setpoint Accuracy
.................................................2 % Nom.
4 % Max.
Cross Regulation (IBAT1 = 0 to 100 mA)
......................................0.1 mV/mA Nom.
0.2 mV/mA Max.
Although not specifically required for
proper/specified operation of the
SPT5204QL, external decoupling
capacitors may be employed to reduce
noise and interaction with adjacent circuits.
Output decoupling can be achieved by
placing 0.1 µf ceramic caps at the load.
F1
F1
may be used in distributed systems to
isolate single-board failures.
should be ≥ 2 A, i2t ≥ 0.2 A2 sec,
R ≤ 25 mΩ.
Input Decoupling
Local input decoupling is recommended to
reduce the apparent source impedance to
the SPT5204QL.
C2 0.1 µF, X7R ceramic
C1 3 x 33 µF, 25 V, low ESR tantalum
(AVX TPS series or Kemet T495
series).
Product Dimensions
16
1
2.54 14 PLCS.
(0.100)
2
3
24.38
(0.96)
8
9
3.30 4 PLCS.
(0.13)
36.1
(1.42)
7
8
31.8
(1.250)
14
13
11
10
2.54
TYP.
(0.100)
1.0
TYP.
(0.040)
AIRFLOW
General Specifications
MBTF .................................1,570 kHrs Nom.
Bellcore TR332 (40 °C)
Operating Temperature
0 LFM..................................-40 to +70 °C
100 LFM..............................-40 to +85 °C
Storage Temperature...........-55 to +125 °C
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
11.18 MAX.
(0.44)
2.54
(0.100)
14 PLCS.
DIMENSIONS = MILLIMETERS
(INCHES)
TOLERANCES = (.xx) = ± .25
(.01)
(.xxx) = ± .13
(.005)
SPT5204QL SLIC Power Module
Product Schematic
Temperature Derating
Vin = 12 V; VB1 = 15 mA; VB2 = 75 mA (3 off-hook, 1 ringing, 5 REN)
or Vin = 12 V; VB1 = 3 mA; VB2 = 100 mA (4 off-hook)
7
8
+12 Vin
VBAT1
VBAT2_b
C1
C2
VBAT2_a
2
3
14
13
10
-63 V, 100 mA
-24 V, 50 mA
11
GND
GND
100
-24 V, 50 mA
80
% MAXIMUM OUTPUT
12 V
<2 A
F1
Return
100 LFM
40
E
T
E
L
O
S
B
O
RECOMMEND SOLID GROUND PLANE ON COMPONENT
SIDE OF MOTHER BOARD UNDER SPT5204QL.
PIN DESCRIPTIONS:
12 Vin
10-15 VDC input, <2 A
VBAT1
-63 V, 100 mA
VBAT2
-24 V, 2 x 50 mA outputs
GND
Common input and output returns
0 LFM
60
20
0
-40
-30
-20
70
80
90
100
110
AMBIENT TEMPERATURE (°C)
Reliable Electronic Solutions
Asia-Pacific:
TEL +886- (0)2 25624117 • FAX +886- (0)2 25624116
Europe:
TEL +41-41 768 5555 • FAX +41-41 768 5510
The Americas: TEL +1-951 781-5500 • FAX +1-951 781-5700
www.bourns.com
COPYRIGHT© 2005, BOURNS, INC. LITHO IN U.S.A., REV. 1/05