Features ■ ■ ■ ■ ■ ■ ■ Powers ringing SLICs Overcurrent protection Surface mount design Non-isolated outputs Ultraquiet outputs Superior transient response 10 REN capability ■ ■ ■ ■ ■ ■ Compact design Simplifies assembly & test Fast time-to-market Remote inhibit Eliminates ALEL caps Patent 6,195,273 SPT5504CL SLIC Power Module General Information Input Specifications Voltage ...................................4.75 VDC Min. 5 VDC Nom. 5.25 VDC Max. Current No Load..............................120 mA Nom. 140 mA Max. IBAT1 = 100 mA .................1660 mA Nom. 1700 mA Max. IBAT2 = 100 mA ...................750 mA Nom. 780 mA Max. Disabled ................................20 mA Max. Remote Enable Low = Enable .................0.4 VDC Max. (open = enable) High = Disable ...................4.0 VDC Min. (source ≤1 mA) Output Specifications The SPT5504CL is a member of Bourns Switch Power SLIC Power module family. The output voltages provide low-noise operation for very quiet off-hook conditions and on-hook transmissions. The SPT5504CL is capable of 7 W total output power, with up to 100 mA available from each output rail. The SPT5504CL’s easy to use surface mount design and compact footprint Output Decoupling minimize the board space dedicated to power (less than 1.4 in2). Its robust design ensures reliable power and eliminates the need for Aluminum Electrolytic capacitors. By integrating the entire power solution, the OEM customer saves time and money in engineering, debugging, purchasing hardto-source components, test and inventory. Fault Protection E T E L O S B O Power ......................................................7 W VBAT1 Voltage .................................... -65 V Min. -63 V Nom. -61 V Max. Current ..................................0 to 100 mA 10 REN (2 s on, 4 s off) 120 mA Min. (trip < 150 ms) Ripple Voltage ...........................15 mV Nom. 30 mV Max. (IBAT1 = 50 mA) Temperature Coefficient (T -25 °C) ...................................... -20 mV/°C Nom. -40 mV/°C Max. VBAT2 Voltage (Two 50 mA Outputs) ................................................ -25 V Min. -24 V Nom. -23 V Max. Current ..................................0 to 100 mA Ripple Voltage ..........................5 mA Nom. 20 mA Max. (IBAT2 = 50 mA) Temperature Coefficient (T -25 °C) .......................................1.2 mV/°C Nom. 4 mV/°C Max. VBAT2 Load Regulation (IBAT2 = 0 to 50 mA).......0.5 mV/mA Nom. 1 mV/mA Max. VBAT2 Setpoint Accuracy.............2 % Nom. 4 % Max. Cross Regulation (IBAT1 = 0 to 100 mA) ......................................0.1 mV/mA Nom. 0.2 mV/mA Max. Although not specifically required for proper/specified operation of the SPT5504CL, external decoupling capacitors may be employed to reduce noise and interaction with adjacent circuits. Output decoupling can be achieved by placing 0.1 µf ceramic caps at the load. Note that larger cap values can substantially increase the start-up currents drawn from the 5 V source. F1 F1 may be used in distributed systems to isolate single-board failures. should be ≥ 2.5 A, i2t ≥ 0.2 A2 sec, R ≤ 25 mΩ. Input Decoupling Local input decoupling is recommended to reduce the apparent source impedance to the SPT5504CL. C2 0.1 µF, X7R ceramic C1 100 µF, 10 V, low ESR tantalum (AVX TPS series or Kemet T495 series). Product Dimensions 16 1 31.8 (1.250) 2.54 (0.100) 14 PLCS. 2.54 14 PLCS. (0.100) 24.38 (0.96) 8 9 3.30 4 PLCS. (0.13) 36.1 (1.42) 2.54 TYP. (0.100) 1.0 TYP. (0.040) 11.18 MAX. (0.44) DIMENSIONS = MILLIMETERS (INCHES) TOLERANCES = (.xx) = ± .25 (.01) (.xxx) = ± .13 (.005) General Specifications MBTF .................................2,100 kHrs Nom. Bellcore TR332 (40 °C) Operating Temperature 0 LFM..................................-40 to +85 °C Storage Temperature...........-55 to +125 °C Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SPT5504CL SLIC Power Module Product Schematic 1 F1 C1 5V <3 A INHIBIT 2 C2 3 +5 Vin 4 NC 16 14 VBAT1 VBAT2_a 12 6 7 GND 8 -63 V, 100 mA 13 VBAT2_b 11 10 GND 9 -24 V, 50 mA -24 V, 50 mA RETURN RECOMMEND SOLID GROUND PLANE ON COMPONENT SIDE OF MOTHER BOARD UNDER SPT5504CL. PIN DESCRIPTIONS: 5 Vin 4.75-5.25 VDC input, <2.5 A VBAT1 -63 V, 100 mA output VBAT2 -24 V, 2 x 50 mA outputs GND Common input and output returns Inhibit Logic level remote inhibit (>4.0 V, source 1 mA). Enabled when open or <0.4 V. NC No connection E T E L O S B O Reliable Electronic Solutions Asia-Pacific: TEL +886- (0)2 25624117 • FAX +886- (0)2 25624116 Europe: TEL +41-41 768 5555 • FAX +41-41 768 5510 The Americas: TEL +1-951 781-5500 • FAX +1-951 781-5700 www.bourns.com COPYRIGHT© 2005, BOURNS, INC. LITHO IN U.S.A., REV. 1/05