1N5400 THRU 1N5408 R GENERAL PURPOSE PLASTIC RECTIFIER FEATURES DO-201AD 1.0(25.4) MIN JF The plastic package has Underwrites Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique High surge current capability 3.0A operation at TL=75 C with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 260 C/10 seconds at terminals 0.375"(9.5mm) lead length,5lbs.(2.3kg)tension Component in accordance to RoHs 2002/95/EC and WEEE 2002/96/EC 0.210(5.3) 0.190(4.8) DIA 0.375(9.50) 0.285(7.20) MECHANICAL DATA Case: JEDEC DO-201AD molded plastic body Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.042ounce, 1.19 grams 1.0(25.4) MIN 0.052(1.32) 0.048(1.22) DIA Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols 1N 5400 1N 5401 1N 5402 1N 5403 1N 5404 1N 5405 1N 5406 1N 5407 1N 5408 50 100 200 300 400 500 600 800 1000 35 70 140 210 280 350 420 560 700 50 100 200 300 400 500 600 800 1000 Units Maximum DC Blocking Voltage to TA=105 C VRRM VRMS VDC Maximum average Forward Rectified Current 0.5"(12.5mm)lead length at TL=105 C I(AV) 3.0 Amps Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) IFSM 200.0 Amps Maximum Instantaneous Forward Voltage at 3.0 A VF 1.0 Volts Maximum Reverse current at rated DC Blocking Voltage IR Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage TA =25 C TA =100 C Typical Thermal Resistance (Note 2) R Typical Junction Capacitance (Note 1) Maximum Full Load Reverse Current,Full Cycle Average .375"(9.5mm)Lead Length @TL=75°C CJ Operating and Storage temperature Range 10.0 A 100.0 JA Volts Volts Volts 40.0 C/W 50.0 PF HTIR 30 TJ TSTG -65 to+150 A C Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length , P.C.B. mounted JINAN JINGHENG ELECTRONICS CO., LTD. 6-30 HTTP://WWW.JINGHENGGROUP.COM SILICON RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current -3.0Amperes S E M I C O N D U C T O R FIG.2-TYPICAL INSTANTANEOUS FORWARD VOLTAGE.(V) 4 100 3 30 2 INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT (AMPERES) FIG.1-FORWARD CURRENT DERATING CURVE SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES 1N5400 THRU 1N5408 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) lead length 1 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 10 3 1 0.1 TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE 0.3 PEAK FORWARD SURGE CURRENT(AMPERES) 0.01 0.4 100 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 50 FIG.4-TYPICAL REVERSE CHARACTERISTICS 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1 10 INSTANTANEOUS REVERSE CURRENT ( A) 0 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE 200 200 JUNCTION CAPACITANCE(pF) 0.6 150 10 TJ=100 C 1.0 0.1 TJ=25 C 0.01 100 TJ=25 C 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE % 50 1 1 5 10 50 120 100 REVERSE VOLTAGE.( VOLTS) JINAN JINGHENG ELECTRONICS CO., LTD. 6-31 HTTP://WWW.JINGHENGGROUP.COM 140