SR1020D2 THRU SR10 20 0D2 R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 200 Volts Forward Current - 10.0Amperes S E M I C O N D U C T O R FEATURES TO-263 D2PAK J SR F 20 1 50 6 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction Guard ring for overvoltage protection Low power loss ,high efficiency High current capability ,Low forward voltage drop Single rectifier construction High surge capability For use in low voltage ,high frequency inverters, free wheeling ,and polarity protection applications High temperature soldering guaranteed:260℃/10 seconds, 0.360(9.14) 0.25"(6.35mm)from case 0.320(8.13) Component in accordance to RoHS 2011/65/EU 0.420(10.67) 0.380(9.65) 0.190(4.83) 0.160(4.06) 0.245(6.22) MIN 0.055(1.40) 0.045(1.14) 0.066(1.68) 0.036(0.92) 1 K 0.639(16.22) 0.560(14.22) 2 0.053(1.34) 0.047(1.20) MECHANICAL DATA 0.131(3.32) 0.090(2.29) 0.095(2.41) Case: JEDEC TO-263 molded plastic body 0.018(0.46) 0.134(3.40) 0.037(0.94) 0.027(0.69) 0.083(2.10) 0.014(0.35) 0.105(2.67) Terminals: Solderable per MIL-STD-202,method 208 Polarity: As marked Dimensions in inches and (millimeters) Mounting Position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25℃ ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols SR 1020D2 SR 1030D2 SR 1045D2 SR 1060D2 SR 10100D2 SR 10150D2 SR 10200D2 20 30 45 60 100 150 200 14 21 32 42 70 105 140 20 30 45 60 100 150 200 Units Maximum DC blocking voltage VRRM VRMS VDC Maximum average forward rectified current (see Fig.1) I(AV) 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 150.0 Amps Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum instantaneous forward voltage at 10.0 A(Note 1 ) Maximum instantaneous reverse T A =25°C current at rated DC blocking TA =100°C voltage(Note 1) T A =125°C IR Typical thermal resistance (Note 2) R Operating junction temperature range TJ TSTG Storage temperature range Notes: 1.Pulse test: 300 0.60 VF JC 0.75 0.85 0.90 200 50 5 - - 5 0.95 A mA 2.5 C/W C -65 to+150 C s pulse width,1% duty cycle 2-1 Volts -65 to+150 2.Thermal resistance from junction to case JINAN JINGHENG ELECTRONICS CO., LTD. Volts Volts Volts HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES SR1020D2 THRU SR10200D2 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 12 175 10 150 RESISTIVE OR INDUCTVE LOAD 8 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 6 4 2 0 0 20 40 60 80 100 120 125 100 75 50 25 140 150 0.1 1 10 100 LEAD TEMPERATURE ( C) NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 10 TJ=125℃ (mA) TJ=125℃ 10 TJ=25 C 1 INSTANTANEOUS REVERSE CURRENT INSTANTANEOUS FORWARD CURRENT( AMPERES) 50 PULSE WIDTH=300 S 1% DUTY CYCLE 0.1 SR10100D2-SR10200D2 SR1020D2-SR1060D2 1 TJ=75℃ 0.1 0.01 TJ=25℃ 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.001 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) SR10100D2-SR10200D2 SR1020D2-SR1060D2 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, ℃/ W FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 4000 TJ=25℃ f=1.0MHZ Vsig=50mVp-p 1000 SR10100D2-SR10200D2 SR1020D2-SR1060D2 100 0.1 1 10 100 REVERSE VOLTAGE. VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 100 10 1 0.1 0.01 0.1 1 10 100 T, PULSE DURATION ,sec. 2-2 HTTP://WWW.JINGHENGGROUP.COM