SR1045

SR1020 THRU SR10 20 0
R
SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 20 to 200 Volts
Forward Current - 10.0Amperes
S E M I C O N D U C T O R
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
Metal silicon junction ,majority carrier conduction
Guard ring for overvoltage protection
Low power loss ,high efficiency
High current capability ,Low forward voltage drop
Single rectifier construction
JF
High surge capability
SR10100
For use in low voltage ,high frequency inverters,
free wheeling ,and polarity protection applications
High temperature soldering guaranteed:260°C/10 seconds,
0.159(4.05)
0.140(3.55)
0.25"(6.35mm)from case
Component in accordance to RoHS 2011/65/EU
0.053(1.34)
TO-220AC
0.185(4.70)
0.410(10.42)
0.161(4.10)
0.388(9.85)
0.147(3.74)
DIA
0.175(4.44)
0.055(1.39)
0.045(1.14)
0.113(2.88)
0.283(7.20)
0.102(2.60)
0.244(6.20)
0.610(15.50)
0.571(14.50)
PIN
1
2
1.161(29.50)
0.114(2.90)
1.106(28.10)
0.560(14.22)
0.098(2.50)
0.512(13.00)
0.047(1.20)
0.037(0.94)
0.027(0.68)
MECHANICAL DATA
0.023(0.58)
Case: JEDEC TO-220AC molded plastic body
0.014(0.35)
0.208(5.28)
0.192(4.88)
Terminals: Lead solderable per MIL-STD-750,method 2026
Polarity: As marked
Mounting Position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25°C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive
load. For capacitive load,derate by 20%.)
Symbols
SR
1020
SR
1030
SR
1045
SR
1060
SR
10100
SR
10150
SR
10200
20
30
45
60
100
150
200
14
21
32
42
70
105
140
20
30
45
60
100
150
200
Units
Maximum DC blocking voltage
VRRM
VRMS
VDC
Maximum average forward rectified current
(see Fig.1)
I(AV)
10.0
Amps
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load
(JEDEC method)
IFSM
150.0
Amps
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum instantaneous forward voltage
at 10.0 A(Note 1 )
Maximum instantaneous reverse T A =25°C
current at rated DC blocking
TA =100°C
voltage(Note 1)
T A =125°C
IR
Typical thermal resistance (Note 2)
R
Operating junction temperature range
TJ
TSTG
Storage temperature range
0.60
VF
JC
0.75
0.85
0.90
200
50
5
-
-
5
0.95
A
mA
2.5
°C/W
°C
-65 to+150
°C
2.Thermal resistance from junction to case
2-1
Volts
-65 to+150
Notes: 1.Pulse test: 300 s pulse width,1% duty cycle
JINAN JINGHENG ELECTRONICS CO., LTD.
Volts
Volts
Volts
HTTP://WWW.JINGHENGGROUP.COM
RATINGS AND CHARACTERISTIC CURVES SR1020 THRU SR10200
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
12
175
10
150
RESISTIVE OR INDUCTVE LOAD
8
PEAK FORWARD SURGE
CURRENT(A)
AVERAGE FORWARD CURRENT
(A)
FIG.1-FORWARD CURRENT DERATING CURVE
6
4
2
0
0
20
40
60
80
100
120
125
100
75
50
25
140 150
0.1
1
10
100
LEAD TEMPERATURE ( C)
NUMBER OF CYCLES AT 60Hz
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.4-TYPICAL REVERSE CHARACTERISTICS
20
10
TJ=125℃
(mA)
TJ=125℃
10
TJ=25 C
1
INSTANTANEOUS REVERSE CURRENT
INSTANTANEOUS FORWARD CURRENT( AMPERES)
50
PULSE WIDTH=300 S
1% DUTY CYCLE
0.1
SR10100-SR10200
SR1020-SR1060
1
TJ=75℃
0.1
0.01
TJ=25℃
0.01
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
0.001
INSTANTANEOUS FORWARD VOLTAGE (V)
SR10100-SR10200
SR1020-SR1060
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE%
FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
TRANSIENT THERMAL IMPEDANCE, ℃/ W
FIG.5-TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE(pF)
4000
TJ=25℃
f=1.0MHZ
Vsig=50mVp-p
1000
SR10100-SR10200
SR1020-SR1060
100
0.1
1
10
100
REVERSE VOLTAGE. VOLTS
JINAN JINGHENG ELECTRONICS CO., LTD.
100
10
1
0.1
0.01
0.1
1
10
100
T, PULSE DURATION ,sec.
2-2
HTTP://WWW.JINGHENGGROUP.COM