Sonardyne UK (Head Office) T. +44 (0) 1252 872288 F. +44 (0) 1252 876100 E. [email protected] www.sonardyne.com Datasheet Navigation Sensor Hub (NSH) Description The Type 8098 Navigation Sensor Hub (NSH) forms part of a Navigation Processor; a ‘one-box’ solution designed to meet the complete on-board requirements of any acoustic operation. The NSH is the interface between the in-water acoustic instruments, sensors and the Navigation Computer which runs the acoustics positioning software. In addition to accurately time-stamping incoming data from external devices such as gyro, VRU and GPS, the NSH also provides power and communications for shipborne acoustic transceivers. A range of hardware interface cards are available for interfacing Sonardyne transceivers and external sensors. By simply plugging these cards into the rear of the unit, the role of the Navigation Sensor Hub can be transformed from supporting simple to complex acoustic operations. The NSH includes an IEEE-1588/PTP precision time source that can be linked to GPS PPS input. Multiple NSHs automatically synchronise their clocks. All incoming data is time stamped to sub-microsecond accuracy; outgoing transmissions and triggers can be scheduled to the same precision. Depending on the application (DP, drilling or survey operations), the NSH can be configured in standalone, dual-independent or dualredundant modes. Key Features Dual 10/100 Fast Ethernet Uplink Up to16 serial ports RS232/485 6 powered transceiver serial ports providing 24/48 V DC power Up to 4 trigger in/out ports IEEE-1588/PTP precision time source Sub-microsecond time-stamping on all Tx/Rx data Configurable for stand-alone, dualindependent or dual-redundant modes Sonardyne UK (Head Office) T. +44 (0) 1252 872288 F. +44 (0) 1252 876100 E. [email protected] www.sonardyne.com Specifications Navigation Sensor Hub (NSH) Fan Filters Reset Switch Front Processor Activity LED I/O Activity LED’s PSU Status Transceiver Supply Status PSU Temp Card Slots Mains On / Off 12 11 10 9 8 7 6 5 4 3 2 1 Port A Rear Port B • Reserved IEC Socket 100-240VAC • Trigger Responder Serial Ports • Dual RS232 • Dual 485 • RS232 / Current Loop • RJ45 Ethernet • 24V Transceiver • 48V Transceiver • Port A - Management • Port B - Serial Feature Processor Memory Motherboard Ports and Connectors Power Supply Environmental Specifications Safety EMC Dimensions (LxWxH) Operating Storage Relative Humidity Shock Type 8098 Freescale PowerQUICC™ II Pro Processor running at 1000 MIPS One single SO-CDIMM DDR2 PC4200 512MB Module Proprietary Sonardyne Type 8098-046 AC IEC power connector socket 12 x Interface card connectors Auto sensing AC input voltage 100-240 V, 50/60 Hz Max current : 2 A @ 240 V, 4 A @110 V Ave. operating current: 0.32 A @ 240 V -5º to 40º C (23º to 104ºF) -20º to 55º C (-4º to 131º F) 20% - 80% (non-condensing) 10 G acceleration peak to peak 5-17 Hz, 0.1” double amplitude displacement 17-640 Hz, 1.5 G acceleration peak to peak Complies with EN61010-1 Complies with Immunity & Emission requirements of EN60945 384 mm (15.1”) x 482 mm (18.9”) x 88 mm (3.4”) Specifications subject to change without notice - 04/2015