Sonardyne UK (Head Office) T. +44 (0) 1252 872288 F. +44 (0) 1252 876100 E. [email protected] www.sonardyne.com Datasheet Navigation Controller Unit (NCU) Description The Type 8020 Navigation Controller Unit (NCU) forms part of a Data Fusion Engine, a ‘one-box’ solution designed to meet the complete on-board requirements of any acoustic operation. The NCU is the interface between the in-water acoustic instruments, sensors and the Navigation Computer which runs the acoustics positioning software. In addition to accurately time stamping incoming data from external devices such as GPS, the NCU also provides power and communications for ship-borne acoustic transceivers. A range of hardware interface cards are available for interfacing Sonardyne transceivers and external sensors. By simply plugging these cards into the rear of the unit, the role of the Navigation Controller Unit can be transformed from supporting simple to complex acoustic operations. For certain DP and drilling operations, the NCU can be configured to offer dual and triple redundancy. Key Features • Interfaces all sensors and acoustic transceivers • Accurate time stamping for next generation tracking methods • Houses sensor specific interfaces • Provides power and communications to acoustic transceivers • Configurable for dual and triple redundancy Sonardyne UK (Head Office) T. +44 (0) 1252 872288 F. +44 (0) 1252 876100 E. [email protected] www.sonardyne.com Specifications Navigation Controller Unit (NCU) Front Rear Feature Processor Memory Motherboard Ports and Connectors Power Supply Environmental Specifications Safety EMC Dimensions (LxWxH) Operating Storage Relative Humidity Shock Type 8020 Motorola Coldfire MCF5307 running at 70 MIPS One single Date Rate(SDR) DIMM Socket fitted with 32MB SDRAM Proprietary Sonardyne Type 8020-046 AC mains IEC power connector socket 12 x Interface card connectors Auto sensing AC input voltage 100-240V, 50-60 Hz Max current : 0.5A @ 240V, 1A @110V Ave. operating current: 0.32A @ 240V 0º to 35º C (32º to 95ºF) -40º to 65º C (-40º to 149º F) 20% - 80% (non-condensing) 10G acceleration peak to peak 5-17Hz, 0.1” double amplitude displacement 17-640Hz, 1.5G acceleration peak to peak Complies with EN61010-1 Complies with Immunity & Emission requirements of RN60945 384mm (15.1”) x 482mm (18.9”) x 88mm (3.4”) Specifications subject to change without notice - 03/2007