Product datasheet HTL 105/230…240 HALOTRONIC-PROFESSIONAL HTL | Electronic transformers for low-voltage halogen lamps Areas of application _ Effect and accent lighting _ Living rooms _ Object lighting _ Conference rooms _ Restaurants _ Recessed and surface-mounted furniture luminaires _ Shop lighting _ Event rooms __ Product benefits _ Very low power loss thanks to high efficacy _ Through-wiring possible on the primary side _ Large temperature range _ Protective operation throughout the entire partial-load range for long lamp life _ High efficiency and reliability Product features _ Line frequency: 50…60 Hz _ RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 _ Line harmonics according to EN 61000-3-2 _ Immunity according to EN 61547 _ Safety: to EN 61347 _ Short-circuit protection, overload protection, overtemperature protection: electronically reversible _ Electrical isolation between the primary side and the secondary side _ Switching between electronic transformer and lamp not permitted _ Energy efficiency: ≥ 91 % (according to ErP regulation 2012/1194/EC) _ Dimmable on the leading edge and trailing edge June 4, 2016, 10:30:29 HTL 105/230…240 © 2016, OSRAM GmbH. All rights reserved. Page 1 of 5 Product datasheet Technical data Electrical data Lamp wattage 35…105 W Line current 0.44 A 1) Input voltage DC 176…275 V Power factor λ 0.95 Operating frequency 40 kHz 3) Nominal output voltage 11.6 / 11.3 V 4) Nominal voltage 230…240 V Input voltage AC 207…264 V Mains frequency 50…60 Hz System wattage 108.00 W Max. ECG no. on circuit breaker 10 A (B) 23 Max. ECG no. on circuit breaker 16 A (B) 38 Galvanic isolation primary/secondary 4.00 kV 5) ECG efficiency 95 % 6) Inrush current 0.6 A 7) 2) 1) Effectively __ 2) Minimum 3) Approximately 4) 105 W / 35 W 5) eff 6) At full load 7) Maximum Dimensions & weight Length 170.0 mm Width 44.0 mm Height 34.0 mm June 4, 2016, 10:30:29 HTL 105/230…240 © 2016, OSRAM GmbH. All rights reserved. Page 2 of 5 Product datasheet Cable cross-section, input side 2.5 mm² 1) Cable cross-section, output side 4.0 mm² 1) Wire preparation length, input side 14 / 8.0 mm 2) Wire preparation length, output side 14 / 8.0 mm 2) Mounting hole spacing, length 140.0 mm Product weight 160.00 g 1) Maximum 2) Cable sheath / Wire Temperatures & operating conditions Ambient temperature range -20…+50 °C Maximum temperature at tc test point 80 °C Additional product data Design / version Long with cable clamp Capabilities __ Dimming method Trailing- or leading-edge phase control for inductive load dimmers Overload protection Automatic switch off, reversible Overheating protection Automatic switch off, reversible Short-circuit protection Automatic switch-off, reversible Max. cable length to lamp/LED module 2.0 m Cable/wire types, input side H03VV-F 2x0.50 / H03VV-F 2x0.75 / H03VVH2-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 mm² Cable/wire types, output side H03VV-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x1.5 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 / NYM-J 3x2.5 mm² Dimmable Yes Dimming range 0…100 % No-load proof Yes Suitable for fixtures with prot. class II Suitable for emergency lighting Yes Certificates & standards Approval marks – approval ENEC 10 / VDE / VDE-EMC / EAC Standards Acc. to EN 61347/Acc. to EN 55015/Acc. to EN 610003-2/Acc. to EN 61547/Acc. to EN 61047 Type of protection IP20 June 4, 2016, 10:30:29 HTL 105/230…240 © 2016, OSRAM GmbH. All rights reserved. Page 3 of 5 Product datasheet Download Data File Addon Technical Information ATI HTL 105 (GB) Certificates EMC-Marks approval HTi DALI 105 DIM Certificates ENEC-Marks approval Certificates ENEC-Marks approval HTi 105 DIM Certificates EAC HT family Certificates ENEC-Certificate HTL_HTM_HTN_HTi Certificates VDE-EMC-Certificate HTL_HTi Dali Declarations of conformity EC-DOC Halotronic Installation/Operation notice Technical guide - HALOTRONIC for low-voltage halogen lamps Installation/Operation notice HALOTRONIC Manual __ Operating instructions EAC - HTL HTM HTN CAD data 3-dim HTL 105230-240 and HTL 225230-240 9900052 CAD data 3-dim HTL 105230-240 and HTL 225230-240 9900052 CAD data 3-dim HTL 105230-240 and HTL 225230-240 9900052 CAD data PDF HTL 105230-240 and HTL 225230-240 9900052 Logistical Data Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4008321927019 HTL 105/230…240 Shipping carton box 10 235 mm x 89 mm x 183 mm 3.83 dm³ 1711.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Disclaimer June 4, 2016, 10:30:29 HTL 105/230…240 © 2016, OSRAM GmbH. All rights reserved. Page 4 of 5 Product datasheet Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. __ June 4, 2016, 10:30:29 HTL 105/230…240 © 2016, OSRAM GmbH. All rights reserved. Page 5 of 5