ELECTRICAL SOLUTIONS A. System Overview Control Panel Mounts • Installed behind control panel switch • Ideal for high strain areas where cable is routed from panel to panel door • Compatible with most control panel switch designs • Indoor use only B1. Cable Ties B2. Cable Accessories A B3. Stainless Steel Ties B C C1. Wiring Duct Part Number CPM87S-C Used with Cable Ties‡ M, I, S CPM122S-C M, I, S Length A In. mm 2.01 51.1 Width B In. mm .89 22.6 Height C In. mm .17 4.3 Material Zinc plated steel Std. Std. Mounting Pkg. Ctn. Method Qty. Qty. Control panel switch 100 1000 2.82 1.22 .17 Zinc plated steel Control panel switch 71.7 31.0 4.3 100 1000 C2. Surface Raceway C3. Abrasion Protection ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard. C4. Cable Management Pan-Post ™ Standoff • Supports cable bundles above or away from surface • For indoor use only D1. Terminals • Material: Nylon 6.6 D2. Power Connectors .72" (18.3) D3. Grounding Connectors A E1. Labeling Systems 1.00" (25.4) .62" .75" (19.1) (15.9) Part Number PP1S-S10-X PP1S-S12-X PP2S-S10-X PP2S-S12-X Used with Cable Ties‡ M, I, S 1.10" (27.9) Height A In. mm 2.00 50.8 2.00 50.8 4.60 116.8 4.60 116.8 E2. Labels Color Natural Mounting Method #10 (M5) Screw #12 (M5.5) Screw #10 (M5) Screw Std. Pkg. Qty. 10 10 10 Std. Ctn. Qty. 100 100 100 #12 (M5.5) Screw 10 100 ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard. E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)