ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Flat Pan-Post ™ Standoffs • Standard EIA hole spacing allows product to be mounted with user supplied screws up to 1/4" diameter • Organize cables in standard cabinets and racks .61 (15.5) B2. Cable Accessories .75 (19.0) Part Number PPF2S-S25-V M, I, S PPF2S-S25-V69 PPF2SV-S25-V C4. Cable Management M, I, S, HS, LH, H, HLM, HLS PPF2SV-S25-V69 1.38 (34.9) .37 (9.4) TYP .19 (4.8) REF Used with Cable Ties‡ .26 (6.6) 1.62 (41.3) REF .40 (10.2) TYP C1. Wiring Duct C3. Abrasion Protection .61 (15.5) REF .28 (7.2) 1.50 (38.1) REF B3. Stainless Steel Ties C2. Surface Raceway • Mounting method: 1/4" (M6) screw • Use where space is limited • For indoor use only .19 (4.8) REF 5.50 (139.7) 5.60 (142.2) PPF2S PPF2SV Material Nylon 6.6 Flame Retardant Nylon 6.6 Color Mounting Method Nylon 6.6 Natural Two 1/4" (M6) screws Std. Pkg. Qty. Std. Ctn. Qty. 5 100 Std. Pkg. Qty. Std. Ctn. Qty. 100 1000 Flame Retardant Nylon 6.6 ‡Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, HLM = Miniature Tak-Ty ® Hook & Loop Ties and HLS = Standard Tak-Ty ® Hook & Loop Ties . D1. Terminals Right Angle Bases D2. Power Connectors • Support cable above the mounting surface .75" (19.1) .50" (12.7) D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers A Used with Cable Part Number Ties‡ RAFCBI1-S6-C20 I RAFCBI2-S6-C20 I RAFCBI3-S6-C20 I Max. Flat Cable Width In. mm 1.00 25.4 2.00 50.8 3.00 76.2 Length A In. mm 1.75 44.4 2.78 70.6 3.81 96.8 Material Color Environment Mounting Method Nylon 6.6 Black Indoors #6 (M3) Screw ‡Cable tie cross section sizes: I = Intermediate. E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.