ELECTRICAL SOLUTIONS A. System Overview Vertical D-Rings • Patented cable manager ring • Standard EIA hole spacing allows product to be mounted to any standard rack • Flexible material allows arm to rotate so entire cable bundle can be inserted and removed • 1/4" mounting holes allow for a variety of screws to secure the D-ring to a surface • Material: Black Polycarbonate B2. Cable Accessories Part Number Part Description CMVDR1 Vertical D-ring. Outside dimensions 5.70"L x 2.00"W. CMVDR1 CMVDR2 CMVDR1S B1. Cable Ties Fiber 252 ScTP 48 UTP 96 Std. Std. Pkg. Ctn. Qty. Qty. 1 10 CMVDR1S Vertical D-ring. Outside dimensions 3.30"L x 2.00"W. 132 32 52 1 10 CMVDR2 Vertical D-ring. Outside dimensions 5.70"L x 3.00"W. 504 96 192 1 10 CMVDR2S Vertical D-ring. Outside dimensions 3.30"L x 3.00"W. 252 48 96 1 10 CMVDRC Center mounted vertical D-ring for routing cables between two adjacent racks. Requires 8.25" spacing between the center lines of the adjacent rack’s mounting holes. Outside dimensions 5.60"L x 8.00"W. 1000 200 400 1 10 CMVDR2S D1. Terminals Tak-Ty ® Hook & Loop Cable Tie Mounts • For use with hook and loop cable ties, see page B1.87, B1.88 • Unique cradle design provides maximum stability for cable bundle • For indoor use only D2. Power Connectors • Dimensions: 1.10"L x 1.12"W x 0.34"H (27.9mm x 28.4mm x 8.6mm) D3. Grounding Connectors 1.10 (2.80) .142 (3.6) 1.12 (28.5) E1. Labeling Systems .87 (22.1) .34 (8.4) Used with Cable Ties‡ E2. Labels Max. Static Load Material Nylon 6.6 ABMT-S6-C69 .11 (2.8) .68 (17.3) ABMT-A-C20 ABMT-S6-C20 ABMT-S6-C60 C2. Surface Raceway C4. Cable Management CMVDRC ABMT-S6-C C1. Wiring Duct C3. Abrasion Protection All product color is black. Part Number ABMT-A-C B3. Stainless Steel Ties HLS, HLT, TTS, UCT Flame Retardant Nylon 6.6 Color Natural Black Lbs. g 0.38 174 Mounting Method* Pre-installed Rubber Adhesive Std. Pkg. Qty. 100 Std. Ctn. Qty. 1000 100 1000 Natural 100 1000 Black Black 100 1000 100 1000 Natural — — #6 (M3) Screw E3. Pre-Printed & Write-On Markers 100 1000 ‡Cable tie cross section sizes: HLT = Tak-Ty ™ Hook & Loop Ties, HLS = Tak-Ty ™ Hook & Loop Strip Tie, TTS = Tak-Tape ™ Roll, UCT = Ultra-Cinch ™ Tie. *For proper selection of adhesives see page B2.53. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index