specifications A vertical cable management solution of flexible D-rings shall be used on standard communication racks. The vertical D-rings used for open access shall be manufactured from a Polycarbonate material and shall be black in color. The vertical cable management D-rings shall be a one-piece design. The front arm of the product shall be able to rotate ninety degrees to allow entire cable bundles to be inserted. The vertical cable management solution of flexible D-rings shall be installed with two screws less than 0.25" diameter. NETWORK CONNECTIVITY GROUP SPEC SHEET Vertical Cable Management D-rings technical information Vertical D-rings Dimensions: CMVDR1: CMVDR1S: CMVDR2: CMVDR2S: CMVDRC: HxWxD=2.38x2.05x5.72in. (60.45x52.07x145.20mm) HxWxD=2.38x2.05x3.26in. (60.45x52.07x82.80mm) HxWxD=2.38x3.30x5.72in. (60.45x83.82x145.20mm) HxWxD=2.38x3.30x3.26in. (60.45x83.82x82.80mm) HxWxD=1.75x8.75x5.66in. (44.45x222.25x143.76mm) 1": 1" short: 2": 2" short: Center: Capacity: CMVDR1: CMVDR1S: CMVDR2: CMVDR2S: CMVDRC: 96 CAT 5 cables 48 CAT 5 cables 192 CAT 5 cables 96 CAT 5 cables 432 CAT 5 cables 19" rack: 23" rack: Packaging: Packaged one per bag Standards: Meets all EIA requirements as defined in EIA-310D. Manufactured from a material that meets UL94-V0 specifications key features and...benefits EIA mounting holes Capable of being applied to any standard EIA rack system Flexible arm Provides open access that allows installation of complete cable bundles Rounded edges Prevents sharp edges in contact with cable insulation 1/4" screw holes Utilize a wide variety of screws to secure product to wall or rack applications The PANDUIT ® Vertical Cable Management D-rings are designed to contain cables in a vertical pathway. The cable management D-rings are a labor saving solution that provides the installer the ability to insert complete cable bundles. Use these vertical D-rings in conjunction with horizontal D-rings for a complete open access solution on rack systems. Products may also be mounted onto a wall or other flat surfaces with a variety of screws. V i s i t o u r w e b s it e a t : w w w. p a n d u i t . c o m / n c g CMVDR1 CMVDR1S CMVDR2 CMVDR2S CMVDRC Racks CMR19X84 CMR23X84 Horizontal D-ring Systems 2RU front and rear: 2RU front: 1RU front and rear: 1RU front: CMPH2 CMPHF2 CMPH1 CMPHF1 Accessories 12-24 mounting screws: Flat post standoff: Flat post standoff, flame retardant: Flat post standoff, TAK-TY ® compatible: Flat post standoff, TAK-TY compatible, flame retardant: Bend radius clip: 1RU strain relief clip: 2RU strain relief clip: Bundle retainer: Adhesive bundle retainer: S1224-C PPF2S-S25-V PPF2S-S25-V69 PPF2SV-S25-V PPF2SV-S25-V69 CMSRC2 WMSRC1 WMSRC2 BR2-1.3 BR2-1.3-A installer tip CMVDRC requires 8.25" center to center hole spacing for adjacent racks. Flexible Vertical D-rings MOUNTING CONFIGURATIONS 1 Inside Dimensions: 1.23x4.85in. (31.24x123.20mm) 6 Inside Dimensions: 2.40x4.85in. (60.90x123.20mm) 2 Inside Dimensions: 1.23x2.40in. (31.24x60.90mm) 7 Inside Dimensions: 2.40x2.40in. (60.90x60.90mm) 3 4 5 Inside Dimensions: 5.09x4.72in. (129.29x119.88mm) 1. CMVDR1 2. CMVDR1S 3. CMVDRC mounted to front of rack 4. CMVDRC mounted to front of rack and CMVDRC mounted to back of rack 5. Two CMVDRC parts mounted to front of rack. One opens toward the back 6. CMVDR2 7. CMVDR2S The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. WORLD HEADQUARTERS PANDUIT CORP. Tinley Park, Illinois, USA Customer Service: 800-777-3300 Technical Support: 866-405-6654 Fax: 708-444-6993 NETWORK CONNECTIVITY GROUP Email: [email protected] Internet: www.panduit.com/ncg PANDUIT CANADA Markham, Ontario Phone: 800-777-3300 PANDUIT EUROPE LTD. London, UK Phone: 44 208-601-7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: (65) 6379 6700 WORLDWIDE SUBSIDIARIES AND SALES OFFICES Dimensions contained herein are for reference purposes only. For specific dimensional requirements consult the factory. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. For Pricing and Further Information – Contact your local authorized PANDUIT Distributor or Sales Office PANDUIT JAPAN Tokyo, Japan Phone (81) (3) 3767-7011 PANDUIT LATIN AMERICA Jalisco, Mexico Phone: (52) 3 666-2501 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: (61) 3-9794 9020 ©PANDUIT Corp. 2002 ALL RIGHTS RESERVED SA-WASP1035B Printed in U.S.A.