ELECTRICAL SOLUTIONS A. System Overview Masonry Push Mounts • Used to secure wire, cable, or tubing to masonry surfaces • Installed quickly into pre-drilled holes; design holds bundle securely • Material: Impact Modified Weather Resistant Nylon 6.6 B1. Cable Ties B B2. Cable Accessories C A Grip Length A Used with Cable Ties‡ Part Number B3. Stainless Steel Ties Height B Hole Diameter C In. mm In. mm In mm 0.97 24.6 0.25 6.4 0.19 5.0 0.97 24.6 0.27 6.9 0.25 6.4 Std. Std. Mounting Pkg. Ctn. Color Environment Method Qty. Qty. C1. Wiring Duct Pan-Ty ® Masonry Push Mounts MPMS19-C0 M, I, S MPMS25-C0 MPMH38-L0 M, I, S, HS, LH, H, HLM 1.25 31.8 0.30 7.5 0.38 9.5 MPMWH32-L0 M, I, S, HS, LH, H, HLM 1.41 35.8 0.28 7.1 0.32 8.0 Black Indoors/ Outdoors Fir Tree Hole Mount 100 500 100 500 50 500 50 500 Super-Grip ® Masonry Push Mounts SGMPMS19-C0 SGMPMS25-C0 SGM, SGI, SGS SGMPMH38-L0 SGMPMWH32-L0 SGM, SGI, SGS, SGLH, SGH 0.97 24.6 1.19 30.2 0.19 5.0 0.97 24.6 1.24 31.5 0.25 6.4 1.25 31.8 1.49 37.8 0.38 9.5 1.41 35.8 0.28 7.1 0.32 8.0 1.41 35.8 1.63 41.4 0.31 8.0 Black Indoors/ Outdoors Fir Tree Hole Mount 100 500 100 500 50 500 50 500 100 500 Hyper-V ™ Masonry Push Mounts HVMPM32-C0 HV Black Outdoors Fir Tree Hole Mount C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy-Standard, LH = Light-Heavy, H = Heavy, HLM = Miniature Tak-Ty ® Hook & Loop Ties, HLS = Standard Tak-Ty ® Hook & Loop Ties. E1. Labeling Systems Wood Push Mount • Used to secure wire, cable, or tubing to wood surfaces • Barbed design holds mount in place – rated for 60 lb. pullout E2. Labels .31 (7.9) .50 (12.7) E3. Pre-Printed & Write-On Markers .19 (4.8) .75 (19.1) Part Number WPMH-C Used with Cable Ties‡ M, I, S, HS, LH, H, HLM Material Plated Steel Environment Indoors/Outdoors E4. Permanent Identification Mounting Method Hammer into wood Std. Pkg. Qty. 100 ‡Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy, H = Heavy and HLM = Miniature Tak-Ty ® Hook & Loop Ties. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E5. Lockout/ Tagout & Safety Solutions F. Index