ELECTRICAL SOLUTIONS A. System Overview Pan-Steel® Double Wrapped Cable Ties – MLTD Series • Self-locking head design speeds installation and locks into place at any length along the tie body • Cable tie body passes through the head two times for additional strength • Available in heavy, extra-heavy, and super-heavy cross sections • Available in AISI 304 stainless steel for general-purpose applications • Available in AISI 316 stainless steel for the most corrosive environments • Super-heavy double wrapped tested for short circuit applications up to 71.5 kA C1. Wiring Duct 2 Part Number Length* In. mm Min. Loop Tensile Strength** Lbs. N B2. Cable Accessories B3. Stainless Steel Ties 1 Max. Bundle Diameter In. mm B1. Cable Ties Min. Bundle Diameter In. mm Width In. mm Thickness In. mm Recommended Std. Std. Installation Pkg. Ctn. Tool*** Qty. Qty. C2. Surface Raceway AISI 304 Stainless Steel – MLTD Double Wrapped Ties Heavy Cross Section MLT2DH-L 2.0 51 18.5 470 600 2670 1.00 25.4 0.31 7.9 0.010 0.25 MLT4DH-L MLT5DH-L 4.0 5.0 102 127 28.0 34.0 711 863 600 600 2670 1.00 25.4 0.31 2670 1.00 25.4 0.31 7.9 7.9 0.010 0.010 0.25 0.25 MLT6DH-Q 6.0 152 40.0 1016 600 2670 1.00 25.4 0.31 7.9 0.010 0.25 Extra-Heavy Cross Section MLT4DEH-Q 4.0 102 29.5 749 800 3560 1.00 25.4 0.50 12.7 0.010 0.25 25 125 MLT6DEH-Q MLT8DEH-Q MLT4DEH15-Q MLT6DEH15-Q 6.0 8.0 4.0 6.0 152 203 102 152 41.5 53.5 29.5 41.5 1054 800 3560 1359 800 3560 749 1000 4450 1054 1000 4450 0.010 0.010 0.015 0.015 0.25 0.25 0.38 0.38 25 25 25 25 125 125 125 125 MLT8DEH15-Q 8.0 203 53.5 1359 1000 4450 1.00 25.4 0.50 12.7 0.015 0.38 25 125 Super-Heavy Cross Section MLT4DSH-Q 4.0 102 29.5 749 1200 5340 1.00 25.4 0.62 15.9 0.015 0.38 MLT6DSH-Q MLT8DSH-Q 152 203 41.5 53.5 1054 1200 5340 1.00 25.4 0.62 15.9 0.015 1359 1200 5340 1.00 25.4 0.62 15.9 0.015 0.38 0.38 6.0 8.0 1.00 1.00 1.00 1.00 25.4 25.4 25.4 25.4 0.50 0.50 0.50 0.50 12.7 12.7 12.7 12.7 GS4MT, HTMT, PPTMT, ST2MT ST2MT, RT2HT, RT2HTN, PBTMT RT2HT, RT2HTN, PBTMT 50 250 50 50 250 250 25 250 C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors 25 125 25 25 125 125 D3. Grounding Connectors 25 125 25 25 25 25 125 125 125 125 E1. Labeling Systems 25 125 AISI 316 Stainless Steel – For MLTD Double Wrapped Ties Extra-Heavy Cross Section MLT4DEH-Q316 4.0 102 29.5 749 MLT6DEH-Q316 MLT8DEH-Q316 MLT4DEH15-Q316 MLT6DEH15-Q316 6.0 8.0 4.0 6.0 152 203 102 152 41.5 53.5 29.5 41.5 1054 800 3560 1359 800 3560 749 1000 4450 1054 1000 4450 0.010 0.010 0.015 0.015 0.25 0.25 0.38 0.38 MLT8DEH15-Q316 8.0 203 53.5 1359 1000 4450 1.00 25.4 0.50 12.7 0.015 0.38 800 3560 1.00 25.4 0.50 12.7 0.010 1.00 1.00 1.00 1.00 25.4 25.4 25.4 25.4 0.50 0.50 0.50 0.50 12.7 12.7 12.7 12.7 0.25 Super-Heavy Cross Section MLT4DSH-Q316 4.0 102 29.5 749 1200 5340 1.00 25.4 0.63 15.9 0.015 0.38 MLT6DSH-Q316 MLT8DSH-Q316 152 203 41.5 53.5 1054 1200 5340 1.00 25.4 0.63 15.9 0.015 1359 1200 5340 1.00 25.4 0.63 15.9 0.015 0.38 0.38 6.0 8.0 ST2MT, RT2HT, RT2HTN, PBTMT RT2HT, RT2HTN, PBTMT 25 125 25 25 125 125 *Other lengths available, contact Panduit Customer Service. **Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page B3.32. ***For information on installation tools, refer to pages B3.14 – B3.16. E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)