ELECTRICAL SOLUTIONS A. System Overview Pan-Steel® Nylon 11 Selectively Coated Cable Ties – MLTC Series • Self-locking head design speeds installation and locks into place at any length along the tie body • Nylon 11 coating provides additional edge protection and prevents corrosion between dissimilar metals • • • • AISI 316 stainless steel for the most corrosive environments Available in heavy cross section UV resistant, low smoke, halogen-free material Temperature tolerance -40°F (-40°C) to 285°F (140°C) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Part Number Max. Bundle Diameter In. mm Min. Loop Tensile Min. Bundle Length* Strength** Diameter In. mm Lbs. N In. mm Width In. mm Thickness^ In. mm Recommended Installation Tool*** Std. Std. Pkg. Ctn. Qty. Qty. AISI 316 Stainless Steel – For Nylon 11 Selectively Coated Cable Ties Heavy Cross Section 2.0 MLTC2H-LP316 4.0 MLTC4H-LP316 6.0 MLTC6H-LP316 MLTC8H-LP316 8.0 MLTC10H-LP316 10.0 51 102 7.9 201 14.3 362 250 250 1112 0.50 1112 0.50 12.7 0.31 12.7 0.31 7.9 7.9 0.010 0.010 0.25 0.25 152 203 20.5 521 26.8 679 250 250 1112 0.50 1112 0.50 12.7 0.31 12.7 0.31 7.9 7.9 0.010 0.010 0.25 0.25 254 33.0 838 250 1112 0.50 12.7 0.31 7.9 0.010 0.25 GS4MT, ST2MT, HTMT, PPTMT, PBTMT 50 50 250 250 50 50 250 250 50 250 *Other lengths available, contact Panduit Customer Service. **Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page B3.32. ***For information on installation tools, refer to pages B3.14 – B3.16. ^Base material less coating. C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)