ELECTRICAL SOLUTIONS A. System Overview Multi-Tap Connector with Clear Insulation, Single-Sided, with Mounting Holes For Use with Aluminum or Copper Code Conductors B1. Cable Ties Type PCSBMT-S • Flexible design – can be used as a tap, splice, or dead end connector • Body made from high strength, extruded aluminum alloy to provide premium electrical and mechanical performance • Two isolated mounting holes at either end of connector facilitate direct mounting using 1/4'' bolts • Insulated with clear PVC to eliminate the need for taping and allow for visual inspection of the complete conductor insertion • Each port pre-filled with oxide inhibiting joint compound seals out air and moisture to deter surface oxidation • Wide wire range-taking capability minimizes inventory requirements • Plated steel or aluminum set screw provides high strength, durable electrical contact between conductor and connector • UL Listed and CSA Certified for use up to 600 V and temperature rated 90°C B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct W M L C2. Surface Raceway C3. Abrasion Protection H S Part Number PCSBMT2/0-4S-3Y PCSBMT2/0-6S-2Y PCSBMT2/0-8S-2Y PCSBMT2/0-10S2Y PCSBMT2/0-12S1Y PCSBMT250-4S-2Y PCSBMT250-6S-2Y PCSBMT250-8S-2Y PCSBMT250-10S2Y PCSBMT250-12S1Y PCSBMT350-4S-2Y PCSBMT350-6S-2Y PCSBMT350-8S-2Y PCSBMT350-10S1Y PCSBMT350-12S1Y PCSBMT600-4S-2Y PCSBMT600-6S-2Y PCSBMT600-8S-2Y PCSBMT600-10S1Y PCSBMT600-12S1Y Conductor Size Range 2/0 – #14 AWG STR #10 – #14 AWG SOL 250 kcmil – #10 AWG STR 350 kcmil – #10 AWG STR 600 kcmil – #6 AWG STR No. of Ports 4 6 8 10 12 4 6 8 10 12 4 6 8 10 12 4 6 8 10 12 Figure Dimensions (In.) L 4.20 5.55 6.89 8.24 9.58 5.78 7.66 9.53 11.41 13.29 6.17 8.17 10.17 12.17 14.17 7.84 10.41 12.97 15.53 18.09 W 1.31 1.31 1.31 1.31 1.31 2.00 2.00 2.00 2.00 2.00 2.25 2.25 2.25 2.25 2.25 2.25 2.25 2.25 2.25 2.25 H 1.50 1.50 1.50 1.50 1.50 2.25 2.25 2.25 2.25 2.25 2.63 2.63 2.63 2.63 2.63 2.88 2.88 2.88 2.88 2.88 S 0.67 0.67 0.67 0.67 0.67 0.94 0.94 0.94 0.94 0.94 1.00 1.00 1.00 1.00 1.00 1.28 1.28 1.28 1.28 1.28 M 3.61 4.96 6.30 7.65 8.99 4.94 6.82 8.69 10.57 12.45 5.25 7.25 9.25 11.25 13.25 6.65 9.22 11.78 14.34 16.90 Mounting Hole Size (In.) 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Hex Key Size (In.) 1/2 1/2 1/2 1/2 1/2 23/32 23/32 23/32 23/32 23/32 7/8 7/8 7/8 7/8 7/8 15/16 15/16 15/16 15/16 15/16 Std. Pkg. Qty. 3 2 2 2 1 2 2 2 2 1 2 2 2 1 1 2 2 2 1 1 C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)