ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Two-Hole, Vertical Four-Barrel Lug For Use with Stranded Aluminum or Copper Code Conductors Type LAM4SB • Four barrels provide termination of four conductors • Vertical configuration saves space • Made from high strength, extruded aluminum alloy to provide premium electrical and mechanical performance • Tin-plated to inhibit corrosion • Wide wire range-taking capability minimizes inventory requirements • Inspection window to visually assure full conductor insertion • Plated steel or aluminum set screw provides high strength, durable electrical contact between conductor and connector • UL Listed and CSA Certified for use up to 600 V and UL temperature rated 90°C B3. Stainless Steel Ties L W C1. Wiring Duct HOLE SPACING P C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors H2 T Part Number LAM4SB600-38-1Y Conductor Size Range #2 AWG – 600 kcmil Stud Hole Size (In.) 3/8 LAM4SB750-38-1Y 1/0 AWG – 750 kcmil 3/8 H1 Figure Dimensions (In.) Stud Hole Spacing (In.) 1.38 Hex Key Size (In.) 3/8 L 4.91 W 2.47 H1 3.00 H2 1.88 T 0.75 P 2.34 Std. Pkg. Qty. 1 1.38 3/8 4.91 2.84 3.00 1.88 0.75 2.34 1 The use of Panduit oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See page D2.155. Four-Hole, Four-Barrel Lug For Use with Stranded Aluminum or Copper Code Conductors Type LAM4D • Four barrels provide termination of four conductors • Made from high strength, extruded aluminum alloy to provide premium electrical and mechanical performance • Tin-plated to inhibit corrosion • Wide wire range-taking capability minimizes inventory requirements • Inspection window to visually assure full conductor insertion • Plated steel or aluminum set screw provides high strength, durable electrical contact between conductor and connector • LAM4LD connector is provided with dual set screws to allow premium clamping of conductor to connector for heavy duty applications • For use up to 600 V and temperature rated 90°C • Available with NEMA hole sizes and spacing L L E1. Labeling Systems HOLE SPACING E2. Labels W P E3. Pre-Printed & Write-On Markers E5. Lockout/ Tagout & Safety Solutions F. Index W HOLE SPACING HOLE SPACING T E4. Permanent Identification HOLE SPACING H T Figure 1 P H Figure 2 Figure Dimensions (In.) Part Number ◆ LAM4D250-12-1Y Figure No. 1 Conductor Size Range # 6 AWG – 250 kcmil Stud Hole Size (In.) 1/2 Stud Hole Spacing (In.) 1.75 Hex Key Size (In.) 5/16 L 4.25 W 4.04 H 1.19 T 0.31 P 3.25 Std. Pkg. Qty. 1 ◆ LAM4D350-12-1Y 1 # 6 AWG – 350 kcmil 1/2 1.75 5/16 4.50 4.72 1.37 0.31 3.25 1 ◆ LAM4LD600-12-1 2 #2 – 600 kcmil 1/2 1.75 3/8 5.50 5.31 1.50 0.38 3.25 1 ◆ LAM4LD1000-12-1 2 350 – 1000 kcmil 1/2 1.75 3/8 6.19 7.11 1.88 0.56 3.44 1 The use of Panduit oxide inhibiting joint compound (CMP-100) is recommended for pad to pad and conductor connections. See page D2.155. ◆NEMA hole sizes and spacing. Prime items appear in BOLD.