A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems Code Conductor, Two-Hole, Long Barrel with Window Lug C. Fiber Optic Systems For Use with Stranded Copper Conductors • Meets TIA-607-B requirements for network systems grounding applications • Tested by Telcordia – meets NEBS Level 3 with AWG conductor • Requires crimping tools and dies, see pages M.46 – M.49 • UL Listed and CSA Certified with AWG conductor for use up to 35 KV** and temperature rated 90°C when crimped with Panduit and specified competitor crimping tools and dies D. Power over Ethernet E. Zone Cabling F. Wireless W HOLE SPACING HOLE SPACING G. Outlets L B B T INSPECTION WINDOW INSPECTION WINDOW 90° 45° B T T L L H. Media Distribution Figure 1: Straight Figure 2: 45° Bent I. Physical Infrastructure Management Figure 3: 90° Bent W INSPECTION WINDOW W HOLE SPACING HOLE SPACING W J. Overhead & Underfloor Routing INSPECTION WINDOW W W HOLE SPACING • Color-coded barrels marked with Panduit and specified competitor die index numbers for proper crimp die selection • Long barrel maximizes number of crimps and provides premium wire pull-out strength and electrical performance • Inspection window to visually assure full conductor insertion • Tin-plated to inhibit corrosion • Available with NEMA hole sizes and spacing T B HOLE SPACING 90° L INSPECTION WINDOW B INSPECTION WINDOW 45° B T L K. Surface Raceway L. Cabinets, Racks & Cable Management M. Grounding & Bonding N. Industrial O. Labeling & Identification P. Cable Management Accessories Q. Index M.36 L Figure 4: Slotted, Straight Part Number LCC10-14JAW-L* LCC10-14JAWH-L* Figure 5: Slotted, 45° Bent Copper Figure Conductor No. Size 4 5 LCC10-14JAWF-L* 6 LCC10-14AW-L* #14 – #10 AWG STR, #12 – #10 AWG SOL Figure 6: Slotted, 90° Bent Stud Hole Size In. 1/4 Stud Hole Spacing In. 0.50 – 0.63 W 0.42 B 0.53 L 1.93 1/4 0.50 – 0.63 0.42 0.53 1.78 Figure Dimensions In. 1/4 0.50 – 0.63 0.42 0.53 1.56 1 1/4 0.63 0.42 0.53 1.93 LCC8-10AW-L 1 #10 0.63 0.41 0.70 2.01 LCC8-14AWH-L 2 1/4 0.63 0.48 0.70 1.91 LCC8-14AWF-L 3 LCC8-38DW-L 1 #8 AWG 1/4 0.63 0.48 0.70 1.61 3/8 1.00 0.60 0.70 2.70 Panduit Crimping Tool‡ CT-1570, CT-1701 Panduit Wire Die Color Strip Std. and Die Length Busbar Pkg. No.‡ In. Pattern^ Qty. 50 B B — 9/16 B B B CT-1700, CT-930, CT-2930/L, CT-2930/LE Red P21 B 3/4 B B, D 50 50 50 50 50 50 50 ‡See pages M.50 – M.53 for Panduit and competitor tool and die information. *Not tested to NEBS Level 3 requirements. **Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V. ^See page M.30 for busbar patterns. ◆NEMA hole sizes and spacing. Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD. A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems Code Conductor, Two-Hole, Long Barrel with Window Lug (continued) Part Number LCC6-10ABW-L Copper Figure Conductor No. Size 4 Stud Hole Size In. #10 Stud Hole Spacing In. 0.63 – 0.75 W 0.46 B 1.07 L 2.52 Figure Dimensions In. LCC6-14JAW-L 4 1/4 0.50 – 0.63 0.48 1.07 2.49 LCC6-14JAWH-L 5 1/4 0.50 – 0.63 0.48 1.07 2.08 LCC6-14JAWF-L 6 1/4 0.50 – 0.63 0.48 1.07 1.66 LCC6-14AW-L 1 1/4 0.63 0.48 1.07 2.49 LCC6-38DW-L 1 3/8 1.00 0.62 1.07 3.08 LCC6-12W-L 1 1/2 1.75 0.75 1.07 3.97 LCC4-14AW-L 1 1/4 0.63 0.55 1.05 2.50 #6 AWG Panduit Crimping Tool‡ Panduit Wire Die Color Strip Std. and Die Length Busbar Pkg. No.‡ In. Pattern^ Qty. 50 B B B CT-1700, CT-930, CT-2930/L, CT-2930/LE Blue P24 1 1/8 B B B, D 1 1/8 N 50 50 LCC4-12W-L 1 1 #4 – #3 AWG STR, #2 AWG SOL 3/8 1/2 1.00 1.75 0.62 0.75 1.05 1.05 3.09 4.01 1 LCC2-38DW-Q 1 LCC2-12W-Q 1/4 0.63 0.60 1.16 2.67 3/8 1.00 0.66 1.16 3.24 1 1/2 1.75 0.75 1.16 4.41 LCC1/0-14AW-X 1 1/4 0.63 0.76 1.44 3.07 LCC1/0-38DW-X 1 3/8 1.00 0.76 1.44 3.57 LCC1/0-12W-X 1 1/2 1.75 0.80 1.44 4.74 LCC2/0-14AW-X 1 1/4 0.63 0.85 1.50 3.23 LCC2/0-38DW-X 1 3/8 1.00 0.85 1.50 3.67 LCC2/0-12W-X 1 1/2 1.75 0.85 1.50 4.83 LCC3/0-38DW-X 1 3/8 1.00 0.96 1.50 3.70 LCC3/0-12W-X 1 LCC4/0-38DW-X 1 ◆ LCC4/0-12W-X LCC250-38DW-X ◆ LCC250-12W-X 1 #2 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 1 1 250 kcmil 1/2 1.75 0.96 1.50 4.87 3/8 1.00 1.06 1.56 3.81 1/2 1.75 0.96 1.56 3.81 3/8 1.00 1.17 1.61 3.89 1/2 1.75 1.17 1.61 4.12 ‡See pages M.50 – M.53 for Panduit and competitor tool and die information. *Not tested to NEBS Level 3 requirements. **Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V. ^See page M.30 for busbar patterns. ◆NEMA hole sizes and spacing. www.panduit.com E. Zone Cabling 50 F. Wireless 50 50 G. Outlets 50 CT-1700, CT-930, CT-2930/L, CT-2930/LE 1 1/8 Gray P29 50 50 N B CT-1700, CT-930, CT-2930/L, CT-2930/LE Brown P33 1 1/4 B, D N B CT-930, CT-2930/L, CT-2930/LE Pink P42 1 1/2 B, D N B CT-930, CT-2930/L, CT-2930/LE Black P45 1 9/16 B, D N CT-930, CT-2930/L, CT-2930/LE Orange P50 CT-930, CT-2930/L, CT-2930/LE Purple P54 CT-930, CT-2930/L, CT-2930/LE Yellow P62 H. Media Distribution B, D 1 1/8 LCC2-14AW-Q D. Power over Ethernet 50 B LCC4-38DW-L C. Fiber Optic Systems B, D 1 9/16 N N 1 5/8 N B, D 1 11/16 N 25 25 25 10 10 10 10 10 10 I. Physical Infrastructure Management J. Overhead & Underfloor Routing K. Surface Raceway L. Cabinets, Racks & Cable Management M. Grounding & Bonding 10 10 N. Industrial 10 10 O. Labeling & Identification 10 10 P. Cable Management Accessories Q. Index Table continues on page M.38 For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see back cover). M.37 A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems Code Conductor, Two-Hole, Long Barrel with Window Lug (continued) C. Fiber Optic Systems D. Power over Ethernet E. Zone Cabling Part Number ◆ LCC350-12W-X LCC350-38DW-X ◆ LCC400-12W-6 LCC400-38DW-6 F. Wireless ◆ LCC500-12W-6 LCC500-38DW-6 G. Outlets ◆ LCC600-12W-6 LCC600-38DW-6 H. Media ◆ LCC750-12W-6 Distribution LCC750-38DW-6 I. Physical Infrastructure Management J. Overhead & Underfloor Routing Copper Figure Conductor No. Size 1 1 350 kcmil 1 1 400 kcmil 1 1 500 kcmil 1 1 600 kcmil 1 1 750 kcmil Stud Hole Size In. 1/2 Stud Hole Spacing In. 1.75 W 1.28 B 2.24 L 5.76 3/8 1.00 1.28 2.24 4.58 1/2 1.75 1.28 2.30 5.84 3/8 1.00 1.39 2.30 4.66 1/2 1.75 1.54 2.50 6.12 3/8 1.00 1.54 2.50 4.94 1/2 1.75 1.70 2.69 6.36 3/8 1.00 1.70 2.69 5.18 1/2 1.75 1.89 2.88 6.65 3/8 1.00 1.89 2.88 5.71 Figure Dimensions In. Panduit Wire Die Color Strip Std. and Die Length Busbar Pkg. No.‡ In. Pattern^ Qty. N 10 Red CT-930, P71 CT-2930/L, 2 5/16 Red B, D 10 CT-2930/LE P71 Panduit Crimping Tool‡ CT-930, CT-2930/L, CT-2930/LE CT-930, CT-2930/L, CT-2930/LE CT-930, CT-2930/L, CT-2930/LE CT-930, CT-2930/L, CT-2930/LE Blue P76 Blue P76 Brown P87 Brown P87 Green P94 Green P94 Black P106 Black P106 2 3/8 2 9/16 2 3/4 2 15/16 N 6 B, D 6 N 6 B, D 6 N 6 B, D 6 N 6 B, D 6 ‡See pages M.50 – M.53 for Panduit and competitor tool and die information. *Not tested to NEBS Level 3 requirements. **Consult cable manufacturer for voltage stress relief instructions with applications greater than 2000 V. ^See page M.30 for busbar patterns. ◆NEMA hole sizes and spacing. K. Surface Raceway L. Cabinets, Racks & Cable Management M. Grounding & Bonding N. Industrial O. Labeling & Identification P. Cable Management Accessories Q. Index M.38 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.