Mini-Com Shielded Jack Modules TG Style Termination Part Numbers: CJS6X88TG**Y, CJSK6X88TG**, CJSQ6X88TGBL, CJSH6X88TG**Y, CJS688TG**Y, CJSK688TG**, CJSQ688TG**, CJSH688TG**Y, CJS5E88TG**Y, CJSK5E88TG**, CJSH5E88TG**Y INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 PN366M Strain relief clip Jack Wire cap Blue - Cat. 6A White - Cat. 6 Red - Cat. 5e CABLE PREPARATION STEPS S/FTP Individual foil pair screen 2.00" (50.8mm) CWST Conductors Braid 0.50" (12.7mm) SF/UTP 2.00" (50.8mm) Overall foil screen CWST Conductors Braid 0.50" (12.7mm) U/FTP 2.00" (50.8mm) Individual foil pair screen Drain Wire Conductors CWST Drain wire F/UTP Drain Wire Overall foil screen 2.00" (50.8mm) CWST Conductors 0.50" (12.7mm) Drain wire For Technical Support: www.panduit.com/resources/install_maintain.asp ** = color. Page 1 of 3 INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 PN366M TERMINATION STEPS 2 1 4 3 0.5" (12.7mm) 2 Trim pair separator and/or ripcord, if present. 5 6 EGJT Do not pre-arrange conductors. (OR) 7 7 T568B Wiring T568A Wiring 1. R R F F (OR) 1. 2. 1. 2. (OR) 1. 2. R R F F For Technical Support: www.panduit.com/resources/install_maintain.asp Page 2 of 3 INSTALLATION INSTRUCTIONS © Panduit Corp. 2015 8 Trim conductors flush PN366M 9 10 Trim drain wire, if present 11 13 12 EGJT Grounding Kit, CJSGK-X (See note 5) REMOVAL STEPS 2 1 3 Notes: 1. For specified performance, follow TIA/EIA 568-C installation guidelines. 2. Shielded jack modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter. 3. Shielded jack modules may be re-terminated a minimum of 20 times. 4. For technical and performance information, contact Panduit Technical Support. 5. CJSGK-X Grounding Kit is REQUIRED for all Mini-Com Modular Patch Panels, but is optional for Mini-Com All Metal Shielded Modular Patch Panels. As with all Communication Components, the following statements apply: 1. Never install communications wiring during a lightning storm. 2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. 3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 4. Use caution when installing or modifying communication wiring. E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 3 of 3 Phone: 866-405-6654