T X 6 0 0 0 ™ H e a d ro o m Pe r fo r m a n c e P l a t fo r m The TX6000 ™ solution is a fully integrated system designed for optimum network performance and reliability. The solution provides end-users with assurance that the TX6000™ system will exceed the ANSI/TIA-568-C.2 Category 6 standard relative to the following key electrical parameters: Insertion Loss, Near-End Crosstalk (NEXT) Power Sum NEXT, ACR, Power Sum ACR, and Return Loss. To determine the guaranteed headroom performance shown below, over 100 channels were constructed, tested, and analyzed. ■ These channels consisted of three and four connector topologies – in both short and long cabling runs – to ensure true worst-case conditions ■ Testing was conducted at swept frequencies from 1 MHz to 250 MHz per industry standards Horizontal Cable TX6000™ U/UTP Cable Work Area Mini-Com® TX6™ PLUS Jack Module The testing represents “real world” conditions through the use of an industry recognized hand-held tester, not test analyzers or computer models Telecommunications Room DP6 ™ PLUS Patch Panel Mini-Com® TX6™ PLUS Jack Module Consolidation Point GP6™ PLUS Punchdown System Patch Cords TX6™ PLUS Patch Cords System Components ■ Applications Guaranteed Channel Headroom 1000BASE-T 1.2 Gb/s ATM, 622 Mb/s ATM, 155 Mb/s ATM Electrical Value Over Standard (dB*) Insertion Loss 5.0% 100BASE-TX TP-PMD NEXT 6.0dB 10BASE-TX Future applications intended for Category 6 cabling PSNEXT 7.5dB ACR-N 7.0dB Standard Compliance PSACR-N 9.0dB ISO 11801 ACR-F 7.0dB ANSI/TIA-568-C.2 PSACR-F 9.0dB Return Loss 2.0dB 1000BASE-TX Token Ring 4/16 TIA-569-B ANSI/TIA-606-A In order to ensure headroom performance, all systems must be installed per applicable standards by a Panduit Certified Installer. Consolidation Point Work Area Cord Workstation Workstation Outlet Horizontal Cable Telecommunications Room Cross-Connect/Interconnect Jumper or Modular Cord Channel Panduit is a Solutions Enabler Partner for IP Communications within the Cisco Technology Developer Program. Equipment Cord Switch T X 6 0 0 0 ™ H e a d ro o m Pe r fo r m a n c e P l a t fo r m Power Sum ACR-F Power Sum ACR-N 70 70 60 PS ACR-F (dB) 50 60 50 40 30 20 10 0 PS ACR (dB) 40 0 0 50 100 150 200 #REF! 250 300 350 400 450 500 550 Frequency (MHz) Pair 1 30 Pair 2 Pair 3 Pair 4 Cat6 TIA Channel PSACR-F Return Loss 60 20 Return Loss (dB) 50 0 0 10 0 0 50 100 150 0 PS NEXT Pair 1 Cat6 TIA Channel PSNEXT Insertion Loss Pair 4 200 250 300 350 400 450 500 550 40 30 20 10 0 Frequency (MHz) 0 0 PS NEXT Pair 3 Insertion Loss Pair 2 PS NEXT Pair 2 Insertion Loss Pair 1 Cat6 TIA Channel IL 50 100 150 200 PS NEXT Pair 4 Insertion Loss Pair 3 250 300 350 400 450 500 550 Frequency (MHz) Pair 1 Pair 2 Pair 3 Pair 4 Cat6 TIA Channel Return Loss Panduit report and all calculations and graphs were done by Panduit from data supplied by Intertek ETL SEMKO on 3 tests performed on the specific channel specified in report # & 'Cover Page'!J10 T X 6 0 0 0™ S o l u t i o n P a r t N u m b e r s Cable Type Part Number Description Category 6 U/UTP Riser PUR6004*-UY High-performance Category 6 riser (CMR cable with separator). Conductors are 23 AWG construction. ETL tested and verified for Category 6 performance. Category 6 U/UTP Plenum PUP6004*-UY High-performance Category 6 plenum (CMP cable with separator). Conductors are 23 AWG construction. ETL tested and verified for Category 6 performance. *Available in Black (BL), Blue (BU), Green (GR), International Gray (IG), Orange (OR), Red (RD), Violet (VL), White (WH) and Yellow (YL). Work Area Part Number Description Mini-Com® TX6 ™ PLUS Jack Module CJ688TGIW** Category 6, RJ45, 8-position, 8-wire universal module. TX6 ™ PLUS Patch Cord UTPSP***Y Category 6 patch cord with TX6™ PLUS Modular Plug on both ends. **See catalog for available colors. ***For lengths 3' to 20' (increments of 1') 25', 30', 35' and 40' change the length in the part number to the desired length. Telecommunications Room ™ Part Number Description Category 6, 24-port, flat punchdown patch panel. DP6 PLUS Flat Patch Panel DP24688TGY DP6 ™ PLUS Flat Patch Panel DP48688TGY Category 6, 48-port, flat punchdown patch panel. DP6 PLUS Angled Patch Panel DPA24688TGY Category 6, 24-port, angled punchdown patch panel. DP6 ™ PLUS Angled Patch Panel DPA48688TGY Category 6, 48-port, angled punchdown patch panel. ™ Consolidation Point Part Number GP6 ™ PLUS Punchdown System GPKBW24Y Description Category 6, punchdown termination kit. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800-777-3300 and reference COFL05 ©2011 Panduit Corp. ALL RIGHTS RESERVED. WW-COFL05 Replaces SA-COFL01 11/2011