PanView iQ™ Interconnect Fiber Patch Cords – Plenum (OFNP) S P E C I F I C AT I O N S H E E T specifications Interconnect fiber patch cords shall include a PanView iQ™ LC Connector on one end, which shall include a copper conductor on top of the plug, which shall mate with a PanView iQ™ patch panel. The other end of the Interconnect fiber patch cord shall include a standard, duplex LC connector, which shall be compatible with LC based transceiver interfaces in equipment such as switches and routers. The fiber patch cords shall be available in singlemode and multimode configuration. Fiber interconnect cords shall enable intelligent physical infrastructure management for interconnect architecture by verifying switch port connection and communicating with the system software to allow improved network visibility. technical information All connectors exceed TIA/EIA-455-21A: 500 mating cycles Compliant with: TIA/EIA-568-C.3 and ISO/IEC 11801 IEC-61754-20 (International Interface Standard) TIA-604-10 (FOCIS-10) NFPA 262 (OFNP) flame ratings Insertion loss: Per connection: 0.10dB typical, 0.25dB max. (OM3, OM4) 0.35dB max. (LC singlemode) Return loss: 26dB min. (10Gig multimode) 55dB min. (singlemode) Intermateability requirements: Meet all individual type requirements Packaging: Supplied one per bag, carton of 10 key features and benefits 100% performance tested Assurance that each patch cord will deliver the critical optical performance requirements Documented metrics Insertion loss data recorded for every patch cord Lifetime traceability Test data is traceable to a QC number on each patch cord Metallic continuity element Provides continuity through the connector enabling the PanView iQ™ System to robustly monitor patch cord connectivity Plenum Rated Jacket Meets NFPA 262 (OFNP) flame ratings for standard compliant safety Singlemode endface Every singlemode end face is inspected to be in 100% compliance with geometry as defined in Telcordia GR-326-CORE, Issue 3. UPC polishing delivers return loss of 55dB minimum Certified 10 GbE performance 10Gig patch cords and pigtails are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300m for OM3 and up to 550 meters for OM4 at 850nm to assure high performance and reliability Variety of length Meets individual length requirements for greater system flexibility applications w w w. p a n d u i t . c o m PanView iQ ™ Fiber Patch Cords Singlemode LC-PViQ LC OFNP: PVQ9PE10LQM##.# OM3 Multimode LC-PViQ LC, OFNP: PVQXPE10LQM##.# OM4 Multimode LC-PViQ LC, OFNP: PVQZPE10LQM##.# PanView IQ ™ Fiber Trays Standard requirements: Panduit’s PanView iQ™ System Hardware, which includes intelligent patch panels, modules and cabling, seamlessly feeds information directly into the Physical Infrastructure Manager (PIM™) Software Platform to provide continuous real-time patch field monitoring and visibility of physical infrastructure connectivity, for enhanced system reliability and security, and capacity management. PViQ™ Patch Panels support tiered installations to provide customers with the flexibility of installing PanView iQ ™ System passive connectivity that may be upgraded to fully managed at a future time. PanView iQ™ Interconnect Fiber Patch Cords enable intelligent physical infrastructure management for interconnect architectures by communicating with the system software, to allow improved network visibility. Interconnect fiber patch cords can reduce patch panel requirements by 50% over cross-connect designs, reducing installation and deployment costs. Modular, intelligent, blank 24-port PVQ-FMT no adapters: OM3 multimode MTP: PVQ-FMTMTP-ZX OM4 multimode MTP: PVQ-FMTMTP-ZZ singlemode MTP: PVQ-FMTMTP-9 PanView iQ™ Intelligence Modules Panel manager (PM): PVQ-PM Expansion module (EM): PVQ-EM NOTE: PM requires PanView iQ™ Power Supply (not included). PanView iQ™ Power Supply 12 volt power supply (North America): PVQ-PS12VDC-S (Europe): PVQ-PS12VDC-E (UK): PVQ-PS12VDC-U (Japan): PVQ-PS12VDC-J (China): PVQ-PS12VDC-C PIM ™ Software Platform and Modules Base functionality module: PIM-BASE Connectivity management module: PIM-CONNECT* Maintenance support, and warranty agreement: PIM-CAMA Software and documentation: PIM-MEDIA ##.# — Available in ½ meter length increments from 00.5m to 10.0m *To order this module, add the appropriate letter to the end of the part number, based on the size of the installation: -S (<50 racks); -M (50-199 racks); -L (200-399 racks); -X (400+ racks). For example, the part number for the Connectivity Management Module for 250 racks is PIM-CONNECT-L. PanView iQ ™ Interconnect Fiber Patch Cords – Plenum (OFNP) Cable twist ties Cable twist ties Standard cable label includes: Part number and serial number Cable Print Legend Equipment and patch panel labels Cable Print Legend Standard Duplex LC Connectors PViQ™ Connector Assembly Example Description: PVQ9PE10LQM05.0 = PanView™ Interconnect Fiber Patch Cord, 9/125µm singlemode, OFNP 1.6mm jacketed, standard duplex LC – to – PanView™ Duplex LC, 5.0 meters long P V Q 9 P E 1 0 L Q M 0 5 . 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 7 and 8 – Connector A 10 – Standard LC duplex fiber connector 1, 2, and 3 – Product Family PVQ – PanView iQ™ Interconnect Cords (Std. Duplex LC – to – PanView LC) 9 and 10 – Connector B LQ – PanView™ LC Duplex Fiber Connector 4 – Fiber Type 9 – OS1/OS2 9/125µm singlemode X – OM3 10Gig 50/125µm Z – OM4 10Gig 50/125µm 11 – Length Unit of Measure M – Meters 5 – Jacket Rating P - Plenum (OFNP) 12, 13, 14 and 15 – Length in Meters Available: 00.5 – 10.0 in ½ meter increments 6 – Jacket Diameter E – 1.6mm Duplex Zip Cord Cable WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 and reference PVSP64--WW-ENG ©2012 Panduit Corp. ALL RIGHTS RESERVED. PVSP64--WW-ENG 5/2012