PanView iQ™ (PViQ ™) Patch Panels S P E C I F I C AT I O N S H E E T specifications PanView iQ ™ Patch Panels The modular patch panel shall offer the choice of an installation that is fully intelligent or “intelligent ready” for future upgrades. The modular patch panel design shall accommodate copper RJ45 jack modules. The front of the panel shall include multi-colored LEDs located above each port that indicate the connectivity status, as well as multi-functional push buttons (when intelligence modules have been connected) for diagnostic and configuration navigation. The panel shall offer a “common” method for labeling in compliance with TIA/EIA 606-A labeling standards. The modular patch panel shall be available in both flat and angled versions. Flat unshielded: Angled, unshielded: Flat shielded: Angled, shielded: Panel manager (PM): Expansion module (EM): Weight: Flat: 0.84 lbs. (0.38 kg) Angled: 1.15 lbs. (0.522 kg) Mounting: Mounts to standard EIA 19" or 23" racks (use extender brackets for 23" racks) Packaging: Includes mounting/grounding screws, installation instructions, and Ultimate ID ® Label Covers PVQ-EM Kit with (4) PanView iQ ™ Patch Panels, (1) PanView iQ ™ PM, (3) PanView iQ ™ EMs, and accessories Flat unshielded kit: PVQ-MIQPS96F Angled unshielded kit: PVQ-MIQPS96A NOTE: PM requires PanView iQ ™ Power Supply (not included). key features and benefits Modular design Accommodates intelligence modules that utilize no additional rack space (zero RU) for scalability and growth of network management in a low risk and cost-effective manner Modular connectivity Accepts all Mini-Com ® UTP Modules to reduce risk associated with cable maintenance and expansion, while offering greater choice of options Simultaneous patching Uses multi-colored LEDs to guide technicians through moves, adds, and changes, reducing time and improving accuracy of MAC activities Accepts a multi-function interface unit to enable patch cord tracing and diagnostic navigation from front of panel, offering convenience, improved speed and accuracy of maintenance, and troubleshooting applications w w w. p a n d u i t . c o m PVQ-PM PanView iQ ™ Hardware Kits Flat: 1.72"H x 19.0"W x 1.23"D (43.7mm x 482.6mm x 31.3mm), 1 RU Angled: 1.72"H x 19.0"W x 4.64"D (43.7mm x 482.6mm x 117.7mm), 1 RU Eliminating the need for additional rack space, the PViQ™ Patch Panels allow for direct installation of PViQ™ Intelligence Modules within the same rack unit profile. This approach gives IT Managers the option to phase installations PVQ-MIQAPS24 NOTE: PM requires PanView iQ ™ Power Supply (not included). Dimensions: Panduit’s PViQ™ System Hardware, which includes intelligent patch panels, modules, and cabling, seamlessly feeds information directly into the Physical Infrastructure Manager™ (PIM™) Software Platform to provide continuous real-time patch field monitoring and visibility of physical infrastructure connectivity for enhanced system reliability and security and capacity management. PVQ-MIQAPU24 PVQ-MIQPS24 PanView iQ ™ Intelligence Modules technical information Local addressability PVQ-MIQPU24 PanView iQ ™ Patch Panel Accessories Transitional cover for angled panels (0 RU): PVQ-MIQAPCVR PanView iQ ™ Patch Cords Interconnect – Basic Category 6 UTP: PVQ-BIU6C3BU^^ Category 6 UTP: PVQ-BIU6C1MBU^^^ Category 6 UTP: PVQ-BIU6L1MBU^^^ Interconnect – Enhanced UTP 10Gig: PVQ-EU6AC3BU^^ UTP metric: PVQ-EU6AC1MBU^^^ STP 10Gig: PVQ-ES6X3BU^^ STP metric: PVQ-ES6X1MBU^^^ Cross-Connect Category 6 UTP: PVUTPSPC*BBUY UTP metric: PVUTPSPC**MBBUY STP 10Gig : PVSTP6X***MB^ UTP 10Gig : PVUTP6X***MB^ PanView iQ ™ Power Supply 12 volt power supply (North America): PVQ-PS12VDC-S (Europe): PVQ-PS12VDC-E (UK): PVQ-PS12VDC-U (Japan): PVQ-PS12VDC-J (China): PVQ-PS12VDC-C PIM ™ Software Platform and Modules (installing passive connectivity now and upgrading to a fully managed system at a later time) and to quickly swap out modules for upgrades or repairs without disrupting cabling or data traffic through the panels. An interface unit at the center of the panel adds further built-in functionality such as patch cord tracing and maintenance operations, without the need for additional control equipment. PViQ™ Patch Panels are available in flat and angled solutions for UTP and STP copper connectivity, for both interconnect and cross-connect architectures. Base functionality module: PIM-BASE Connectivity management module: PIM-CONNECT‡ Maintenance, support and warranty agreement: PIM-CAMA Software and documentation: PIM-MEDIA *Available in 3, 5, 7, 9, 14, or 20 feet. **Available in 1, 2, 3, 5, 7, or 10 meters. ***Available in 1, 2, 3, 5, or 10 meters. ^Available in BU (Blue), GR (Green), RD (Red), YL (Yellow), or BL (Black). ^^Available in 3, 5, 7, 10, 14, or 20 feet. Available in BU (Blue) or WH (White). ^^^Available in 1, 2, 3, 5, or 10 meters. Available in BU (Blue) or WH (White). ‡To order this module, add the appropriate letter to the end of the part number, based on the size of the installation: -S (<50 racks); -M (50-199 racks); -L (200-399 racks); -X (400+ racks). For example, the part number for the Connectivity Management Module for 250 racks is PIM-CONNECT-L. PanView iQ™ (PViQ™) Patch Panels P a n V i e w i Q™ T e s t D a t a Environmental Testing Operating Temperature (ambient) 0°C to 45°C (32°F to 113°F) Operating Humidity Up to 90%, non-condensing -40°C to 70°C (-40°F to 158°F) Storage Temperature Storage Humidity Up to 90%, non-condensing Operating Altitude -1000' to 10,000' (-305M to 3,048M) Regulatory Compliance USA, Canada, European Union (CE Mark), Japan, Australia / N.Z., Korea Designed to meet all international requirements as part of PViQ system Electromagnetic Compatibility USA, Canada, European Union (CE Mark), Japan, Australia / N.Z., Korea FCC Part 15 Subpart B Class A limit; ICES-003; VCCI; AS/NZS CISPR 22; EN 55022 Class A limit; EN 55024; KN22 Designed to meet all international requirements as part of PViQ system Safety Approvals Designed to meet all international requirements USA, Canada, European Union (CE Mark), Japan, Australia / N.Z., Korea IEC 60950-1 CB Certificate, UL 60950-1; CAN/CSA c22.2 No. 60950-1; EN 60950-1; KCC Mark 1.23 [31.31] 1.23 [31.31] 4.64 [117.75] 19.00 [482.60] 19.00 [482.60] 1.72 1.72 [43.69] [43.69] 1.72 [43.69] Dimensions are in inches. [Dimensions in brackets are metric]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2012 Panduit Corp. ALL RIGHTS RESERVED. PVSP77--WW-ENG Replaces WW-PVSP25 12/2012