DP6™ PLUS Patch Panels COSP377-WW-ENG

DP6 ™ PLUS Patch Panels
S P E C I F I C AT I O N S H E E T
specifications
Industry standard field bus connector shall
terminate up to three 18 – 22 AWG connectors or
shielded/unshielded cable and shall terminate with
the use of a screwdriver. Connector shall mount in
patch panels and/or wall plates. The plug end
shall be removable from the socket module for
disconnection, diagnostic, and termination purposes.
Mini-Com ® BAS Connector Module
Orange module:CMBRS485OR
Black module:
CMBRS485BL
Blue module:
CMBRS485BU
Green module:CMBRS485GR
Red module:
CMBRS485RD
Yellow module:
CMBRS485YL
technical information
PanZone Active Zone Cabling Box
AWG conductor:
Nominal current rating:
Contact resistance:
Voltage rating:
Electric shock protection
to DIN VDE 0470:
Stripping:
Wire end ferrule,
DIN 46 228/1:
Clamping screw:
Tightening torque:
Pitch (mm/In.):
Colors:
In-ceiling:
®
22 AWG min/18 AWG max
10 A
4.5 mOhms
300 V max
IP 20 (safe from finger touch)
7mm
.2mm2 min /2.5mm2 max
M 2.5
0.4 Nm min/0.5 Nm max
.20''/5.08mm
Connector (Plug and Socket) – Black,
Module – Orange, Black, Blue, Green, Red or Yellow
key features and benefits
Modularity
Dual module snaps in and out of all Panduit® Mini-Com ®
faceplates, modular patch panels, and surface mount boxes for
fast moves, adds, and changes
Screw terminals
No punchdown tool required; terminates with screwdriver
(SD 0.6 x 3.5 DIN 5264)
Applications
·LON
· BACnet MSTP
· Modbus* RTU
· Low voltage pass through
Zone application
Provides a common demarcation point for BAS networks and low
voltage power for building systems
Connector (Plug and Socket) Ease of connection and disconnection of power gives the
ability to segment networks
applications
The Mini-Com ® BAS Connector Module
supports deployment of field bus networks and
low voltage system wiring within the IT
network pathways. The module creates a
demarcation point for the field bus cabling to
be “patched” along with other building
networks (Ethernet, Video, Audio) within the
zone enclosure from the controller out to the
endpoints. This allows for a smooth transition
to IP Enabled devices as they are deployed.
The Mini-Com ® BAS Connector Module easily
integrates with other Panduit offerings such as
zone cabling, DPoE™, jack modules and
copper/fiber cabling systems to leverage a
common network infrastructure.
*Modbus is a registered trademark of Modbus Organization, Inc.
w w w. p a n d u it.c o m
PZICEA
®
Mini-Com Modular Faceplate
Patch Panel with Labels
24 port:
CPPL24WBLY
48 port:
CPPL48WBLY
Insulated Ferrules – Single Wire
DIN End Sleeve
22 AWG white:
FSD75-6-D
20 AWG gray:
FSD76-6-D
18 AWG red:
FSD77-6-D
Ferrule Crimping Tools
Ferrule
end sleeve:
CT-1123
Mini-Com® BAS Connector Module
Mini-Com ® BAS Connector Module
Electrical Performance
Parameters
Nominal Current Rating
Volume Resistance
Performance
10 A
4.5 mOhms
Voltage
Cable Gauge
300 V Max
18 – 22 AWG
Top View
1.37
[34.8]
1.92
[48.7]
Front View
Side View
.72
[18.3]
.54
[13.8]
1.24
[31.5]
Dimensions are in inches. [Dimensions in brackets are metric].
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
©2015 Panduit Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
D-COSP377-WW-ENG
Replaces WW-COSP60
1/2015