Opti-Core® Dielectric Conduited Fiber Cable S P E C I F I C AT I O N S H E E T technical information Opti-Core® Dielectric Conduited Fiber (DCF) Cable is an integral part of the Panduit end-to-end fiber optic solution, designed to support today's data needs while meeting tomorrow's ever-advancing network requirements. Rugged conduit extruded over cable outer jacket eliminates the need for additional channel protection and provides a smaller crush resistant pathway for improved design flexibility and lower installed cost. All-dielectric construction eliminates the need for grounding and bonding, thereby reducing installation time and cost. All Opti-Core® Dielectric Conduited Fiber (DCF) are Riser rated (OFNR) and compliant with Low Smoke Zero Halogen (LSZH) specifications. Opti-Core® Dielectric Conduited Fiber (DCF) fiber types include OM1, OM2, OM3 and OM4 multimode, and OS2 singlemode. Available in 2, 4, 6, 8, and 12 fiber counts. application Designed for use in horizontal installations and backbones within buildings to provide high-density connectivity and ease of installation. Rugged, durable, with crush resistance six times greater than unarmored cable, the need to route through conduit is eliminated. construction physical properties Cable type: Dielectric conduited fiber cable Conduit outside diameter (OD): 10.0mm +/- 0.5mm Cable jacket ratings: Riser, Low Smoke Zero Halogen Bend radius, minimum (installation): 20 x Conduit OD Fiber types: Singlemode:OS2 9/125μm Multimode: OM1 62.5/125um OM2 50/125um OM3 50/125um OM4 50/125um Cable tensile strength (installation): 1320N Fiber count: 2, 4, 6, 8, 12 Conduit rating: C (UL)/UL listed riser UL 2024 Conduit color: Singlemode- Yellow OM1, OM2- Orange OM3, OM4- Aqua Also available in Black Cable compressive load: 600 N/cm Armor Compression Load: 725 N/cm Cable flex: 500 cycles Conduit inner diameter (OD): 10mm Bend radius, minimum (installed): 10 x Conduit OD Cable tensile strength (installed): 396N Cable impact resistance, maximum: 5.88 N-m 12-fiber conduit and cable weight: environmental properties optical properties Fiber attenuation: Multimode: 3.5dB/km 1.5dB/km Singlemode:0.7dB/km 0.7dB/km 68.2448 kg/km @ @ @ @ 850nm @ 850nm 1300nm @ 1300nm 1310nm @ 1310nm 1550nm @1550nm Operating temperature: -10°C to +60°C (14°F to 140°F) Installation temperature: -10°C to +50°C (14°F to 122°F) Storage and shipping temperature: -10°C to +50°C (14°F to 122°F) standards Dual-Rated LSZH Inner Cable Conduit NEC article 770: NEC compliance NEC article 770: NEC compliance UL 1666: North American flame test UL 2024: North American flame test OFNR-LS (UL) OFN-LS (UL): North American fire safety listing C(UL)/UL listed riser UL 2024: North American fire safety listing RoHS 2002/95/EC: Compliant RoHS 2002/95/EC: Compliant ICEA-S-83-596: Compliant NES-713: Toxicity index of inner cable/conduit IEC-60332-3C: Test on electric and optical fibre cables under fire conditions – Part 3 IEC 60754-2: Acid gas generation of inner jacket IEC 61034-2: Measurement of smoke density of cables burning under defined conditions – Part 2 GR-409: Horizontal backbone cable w w w. p a n d u it.c o m Opti-Core® Dielectric Conduited Fiber Cable part number Character 1 2 3 4 5 6 7 8 9 10 Example F S A D 5 1 2 - B L 1 and 2 – Fiber Product FS = OM1, OM2, OS2 Fiber FO = OM3, OM4 Fiber 3 – Cable Construction A = Dielectric conduited distribution (indoor) 4 – Flame/Smoke Rating D = Riser, Low Smoke Zero Halogen 5 – Fiber Type 9 = Singlemode (OS2 ITU G.652.D) 6 = Multimode (OM1) 5 = Multimode (OM2) X = Multimode (OM3) Z = Multimode (OM4) 6 and 7 – *8, 9, and Fiber Count 02 = 2-fiber 04 = 4-fiber 06 = 6-fiber 08 = 8-fiber 12 = 12-fiber 10 – Conduit -BL = Black Conduit *Opti-Core Dielectric Conduited Fiber Cable conduit colors are: Singlemode = Yellow Multimode = Orange and Aqua If black conduit is desired, please add -BL to end of part number. Dielectric Conduited Fiber Cable Cable Outer Jacket Aramid Strength Members Diameter 10.5m +/- .5m Dielectric Conduit Optical Fiber Buffer w w w. p a n d u it.c o m Opti-Core® Dielectric Conduited Fiber Cable DCF Fiber Strain Relief The DCF Fiber Strain Relief (FCCSR10BL) is used with the DCF (Dielectric Conduited Fiber Cable) to control the bend radius at the transition of fiber distribution or breakout cables where they exit an armored conduit. The armored conduit fiber cable will be typically installed inside a zone enclosure or at a machine center panel. Installing the DCF Fiber Strain Relief with the DCF fiber cables can prevent any possible reliability issues related to bend radius. FCCSR10BL 61 [2.39] REF. 60 [2.37] FCCSR10BL 20 [0.79] 22 [0.87] Dimensions are in inches. [Dimensions in brackets are metric]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2016 Panduit Corp. ALL RIGHTS RESERVED. FBSP57--WW-ENG 4/2016