QuickNet Trunk Cable Assemblies: FBSP050--WW-ENG

QuickNet™ Trunk Cable Assemblies
S P E C I F I C AT I O N S H E E T
technical information
Trunk Cable Assemblies allow for rapid deployment of high-density permanent links in a
single assembly for data center applications requiring quick infrastructure installation, such
as main, horizontal, and zone distribution cabling areas. These assemblies optimize cable
routing to ensure efficient use of pathway space and significantly reduce installation time
and cost. They are built with modular, high performance, Multiple-Fiber Push-On/Pull-Off
(MPO) and discrete single fiber connectors. This also provides compatibility, flexibility, and
system performance in all permanent link applications.
Trunk Cable Assemblies are factory terminated and tested to deliver verified optical
performance and reliability for improved network integrity.
application
Data Center applications requiring quick infrastructure deployment such as main, horizontal, and zone distribution areas.
construction
physical properties
Cable type:
Indoor Unarmored
Cable
jacket ratings:
Optical Fiber Nonconductive
Plenum (OFNP)
Low Smoke Zero Halogen (LSZH)
Cable outside diameter (OD): 48-fiber: 9.4mm
72-fiber: 9.4mm
96-fiber: 10.0mm
144-fiber: 11.1mm
Fiber types:
Singlemode: OS1/OS2 9/125µm
Multimode: OM3 50/125µm
OM4 50/125µm
Minimum bend radius:
Under load: 20 x cable OD
Static:
10 x cable OD
Cable tensile strength:
1335N
Connector type
options end ‘A’:
LC Simplex or LC Duplex
MPO Female or Male
Cable compressive load:
220N/cm short term
110N/cm long term
Fiber count:
48, 72, 96, and 144
Cable flex:
100 cycles
Polarity:
MPO-MPO:
Method A
Discrete-MPO:
A-B
Discrete-Discrete: A-B
Cable twist:
10 cycles
Connector durability:
MTP – 500 mating cycles
Transition outside
diameter (MPO):
48-fiber:
72-fiber:
96-fiber:
144-fiber:
19mm
19mm
19mm
19mm
Pulling eye diameter:
48-fiber:
72-fiber:
96-fiber:
144-fiber:
41mm
41mm
41mm
41mm
Breakout length:
1m
Jacket color:
OS1/OS2: Yellow
OM3:
Aqua
OM4:
Aqua
Connector type
options end ‘B’:
LC Simplex or LC duplex
MPO Female or Male
optical properties
environmental properties
Maximum cable
attenuation:
Singlemode: 1.0dB/km at 1310/1550nm
Multimode: 3.5dB/km at 850nm
1.5dB/km at 1300nm
Storage and
shipping temperature:
Maximum
connector
insertion loss:
Singlemode LC:
Singlemode MPO:
Multimode LC:
Multimode MPO:
Minimum
connector
return loss:
Singlemode LC/MPO: 55dB
Multimode LC:
26dB
Multimode MPO:
26dB
w w w. pa n d u it.c o m
0.35dB
0.75dB
0.25dB
0.50dB
Installation temperature:
Operating temperature:
-40°C to 70°C
0°C to 70°C
-20°C to 70°C
standards
Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3,
TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1,
and TIA-604-10 (FOCIS-10)
RoHS Compliant
QuickNet ™ Trunk Cable Assemblies
part number
Example: FXWSL5E5EAAM100 = Fiber OM3, 48-fiber, indoor trunk, LSZH, MPO female to MPO female, polarity method A, pulling eye, 100 meter
Character
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Example
F
X
W
S
L
5
E
5
E
A
A
M
1
0
0
1 – Fiber
2–
3–
4–
5–
F = Fiber
Fiber Type
9 = OS1/OS2 9/125µm
X = OM3 50/125µm
Z = OM4 50/125µm
Fiber Count
W= 48-fiber
X = 72-fiber
Y = 96-fiber
A = 144-fiber
Cable Type
S = Indoor Trunk
Jacket Type
L = Low Smoke Zero Halogen
(LSZH)
P = Optical Fiber Nonconductive
Plenum (OFNP)
6 – Connector Type End “A”
1 = LC
5 = MPO female
6 = MPO male
L = LC duplex
7 – Connector Variant
E = 1m breakout
2 = 2mm overjacket (LC only)
8 – Connector Type End “B”
1 = LC
5 = MPO female
6 = MPO male
L = LC duplex
9 – Connector Variant
E = 1m breakout
2 = 2mm overjacket (LC only)
10 – Construction/Performance
A = Polarity Method A, Standard IL
(MPO only)
S = Standard IL – Standard Polarity
(MPO-Discrete),
(Discrete-Discrete)
11 – Other
A = Pulling Eye End “A”
12 – Unit of Length
F = Feet
M = Meters
13, 14, 15 – Cable Assembly Length
F: 16-300 ft.
M: 5-100m
trunk cable assembly detail
Cable Assembly Length
Pulling Eye
Pulling Sock
MPO Connectors
Connector Stagger
Breakout Length: 1m Std.‡
‡Breakout length tolerance is 12.7cm (+5")/-0
*Other options are available as follows:
Fiber Types: OM1 62.5/125, OM2 50/125, OM4+ 50/125 Signature Core™
Cable Type: Indoor/Outdoor Armored Trunk, Indoor/Outdoor Trunk, Indoor Armored Trunk
Jacket Type: Dual LSZH/Riser OFNR, Riser OFNR
Connector Type: ST, SC, MTRJ Female, MTRJ Male, SC Duplex
Performance/Construction: Polarity A-Optimized IL, Polarity B-Standard IL Polarity B-Optimized IL
Other: Pulling eye End B, Pulling eye End A and B, No Pulling eye
Please contact Panduit customer service for information on additional part number options
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
©2013 Panduit Corp.
ALL RIGHTS RESERVED.
FBSP50--WW-ENG
11/2013