SEN-5870 SENSITRON SEMICONDUCTOR Part Number: SEN-5870, Rev. - HERMETIC ULTRAFAST RECTIFIER COMMON CATHODE DESCRIPTION: 200 VOLT, 16 AMP, 35 NANOSECOND HERMETIC RECTIFIER IN A TO-257 PACKAGE. MAX RATINGS/ELECTRICAL CHARACTRISTIC ALL RATINGS ARE AT TA = 25 C) UNLESS OTHERWISE SPECIFIED RATING SYMBOL MAX. UNITS PIV 200 Volts Vf 1.0 Volts Vf 0.925 Volts IO 16 Amps IFSM 150 Amps trr 35 nsec MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG) @ TA = 25°C Irr 25 µA MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG) @ TA = 125°C Irr 1.0 mA MAXIMUM THERMAL RESISTANCE (PER LEG) RθJC 1.5 °C/W MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE Top/stg -55 to +150 °C PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM FORWARD VOLTAGE DROP @ TA = 25°C (PER LEG) (If = 8 Amps) MAXIMUM FORWARD VOLTAGE DROP @ TA = 125°C (PER LEG) (If = 8 Amps) MAXIMUM DC OUTPUT CURRENT (TC = 100 OC) PEAK SINGLE CYCLE SURGE CURRENT MAXIMUM REVERSE RECOVERY TIME tp = 8.3 msec (If = 0.5A, Ir = 1.0A, Irr = 0.25A) • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • SEN-5870 SENSITRON SEMICONDUCTOR Part Number: SEN-5870, Rev. - MECHANICAL DIMENSIONS: In Inches / mm .150 (3.81 Dia. .140 3.56) .665 (16.89 .645 16.38) .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) .200 (5.08 .190 4.82) .420 (10.67 .410 10.41) 1 2 .035 (0.89 .025 0.63) 3 Places .045 (1.14 .035 0.89) .430 (10.92 .410 10.41) 3 .100(2.54) BSC 2 Places .120(3.05) BSC TO-257 PINOUT TABLE DEVICE TYPE DUAL RECTIFIER/COMMON CATHODE (P) PIN 1 ANODE 1 PIN 2 COMMON CATHODE PIN 3 ANODE 2 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •