SHD315497 SHD315497B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4237, REV. A HERMETIC POWER ULTRAFAST RECTIFIER DESCRIPTION: A 1000 VOLT, 30 AMP, 90 NANOSECOND HERMETIC POWER ULTRAFAST RECTIFIER IN A SHD-2 / 2B PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TA = 25 °C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 1000 Volts MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) IO 30 Amps MAXIMUM REVERSE RECOVERY TIME trr 90 ns RθJC 0.45 °C/W Top/Tstg -55 to +175 °C TC = 25 °C (If = 30 Amps) Vf 1.85 Volts MAXIMUM FORWARD VOLTAGE DROP, Pulsed TC = 125 °C (If = 30 Amps) Vf 1.65 Volts PEAK INVERSE VOLTAGE (If = 0.5A, Ir = 1.0A, Irr = 0.25A) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTRISTICS CHARACTRISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed MAXIMUM REVERSE CURRENT TC = 25 °C Irr @ 1000 PIV Irr 50 µA MAXIMUM REVERSE CURRENT TC = 125 °C Irr @ 1000 PIV Irr 2 mA • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - [email protected] • SHD315497 SHD315497B SENSITRON DATA SHEET 4237, REV. A MECHANICAL DIMENSIONS: In Inches / mm .315±.010 (8.00±.254) .315±.010 (8.00±.254) SHD-2 .075 (1.91) Max Moly Lid Alumina Ring Moly Base .465±.020 (11.8±.508) .315±.010 (8.00±.254) .150±.010 (3.81±.254) .315±.010 (8.00±.254) .015±.005 (.381±.127) SHD-2B Copper Anode .090 (2.29) Max .020±.005 R (.508±.127 ) Alumina Ring Moly Base (Cathode) .015±.002 (.381±.051) .060±.010 (1.52±.254) DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - [email protected] •