RN1810 PICtail™/PICtail Plus
Daughter Board
User’s Guide
2016 Microchip Technology Inc.
DS50002471A
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.
Trademarks
The Microchip name and logo, the Microchip logo, AnyRate,
dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq,
KeeLoq logo, Kleer, LANCheck, LINK MD, MediaLB, MOST,
MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo,
RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O
are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
ClockWorks, The Embedded Control Solutions Company,
ETHERSYNCH, Hyper Speed Control, HyperLight Load,
IntelliMOS, mTouch, Precision Edge, and QUIET-WIRE are
registered trademarks of Microchip Technology Incorporated
in the U.S.A.
Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut,
BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM,
dsPICDEM.net, Dynamic Average Matching, DAM, ECAN,
EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip
Connectivity, JitterBlocker, KleerNet, KleerNet logo, MiWi,
motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB,
MPLINK, MultiTRAK, NetDetach, Omniscient Code
Generation, PICDEM, PICDEM.net, PICkit, PICtail,
PureSilicon, RightTouch logo, REAL ICE, Ripple Blocker,
Serial Quad I/O, SQI, SuperSwitcher, SuperSwitcher II, Total
Endurance, TSHARC, USBCheck, VariSense, ViewSpan,
WiperLock, Wireless DNA, and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
QUALITYMANAGEMENTSYSTEM
CERTIFIEDBYDNV
== ISO/TS16949==
DS50002471A-page 2
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
GestIC is a registered trademarks of Microchip Technology
Germany II GmbH & Co. KG, a subsidiary of Microchip
Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2016, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
ISBN: 978-1-5224-0380-7
2016 Microchip Technology Inc.
Object of Declaration: RN1810 PICtail™/PICtail Plus Daughter Board
2016 Microchip Technology Inc.
DS50002471A-page 3
RN1810 PICtail™/PICtail Plus Daughter Board
NOTES:
DS50002471A-page 4
2016 Microchip Technology Inc.
RN1810 PICtail™/PICtail PLUS
DAUGHTER BOARD USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 7
Chapter 1. Overview
1.1 Introduction ................................................................................................... 11
1.2 Features ....................................................................................................... 11
1.3 Board Configuration ..................................................................................... 11
Chapter 2. Getting Started
2.1 Overview ...................................................................................................... 13
2.2 Other Information ......................................................................................... 13
Appendix A. Board Schematic
A.1 RN1810 PICtail™/PICtail Plus Daughter Board Schematic ......................... 15
Worldwide Sales and Service .................................................................................... 17
2016 Microchip Technology Inc.
DS50002471A-page 5
RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide
NOTE:
DS50002471A-page 6
2016 Microchip Technology Inc.
RN1810 PICtail™/PICtail PLUS
DAUGHTER BOARD USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
RN1810 PICtail™/PICtail Plus Daughter Board. Items discussed in this chapter
include:
•
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
Recommended Reading
The Microchip Website
Development Systems Customer Change Notification Service
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes how the RN1810 PICtail/PICtail Plus Daughter Board allows
the designer to evaluate and demonstrate the capabilities of the RN1810 module. The
document is organized as follows:
• Chapter 1. “Overview” – This chapter contains the RN1810 PICtail/PICtail Plus
Daughter Board description.
• Chapter 2. “Getting Started” - This chapter provides a quick overview of the
RN1810 PICtail/PICtail Plus Daughter Board.
• Appendix A. “Board Schematic” – This appendix provides the RN1810
PICtail/PICtail Plus Daughter Board schematic.
2016 Microchip Technology Inc.
DS50002471A-page 7
RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description
Arial font:
Italic characters
Initial caps
Quotes
Underlined, italic text with
right angle bracket
Bold characters
N‘Rnnnn
Text in angle brackets < >
Courier New font:
Plain Courier New
Represents
Referenced books
Emphasized text
A window
A dialog
A menu selection
A field name in a window or
dialog
A menu path
MPLAB® IDE User’s Guide
...is the only compiler...
the Output window
the Settings dialog
select Enable Programmer
“Save project before build”
A dialog button
A tab
A number in verilog format,
where N is the total number of
digits, R is the radix and n is a
digit.
A key on the keyboard
Click OK
Click the Power tab
4‘b0010, 2‘hF1
Italic Courier New
Sample source code
Filenames
File paths
Keywords
Command-line options
Bit values
Constants
A variable argument
Square brackets [ ]
Optional arguments
Curly brackets and pipe
character: { | }
Ellipses...
Choice of mutually exclusive
arguments; an OR selection
Replaces repeated text
Represents code supplied by
user
DS50002471A-page 8
Examples
File>Save
Press <Enter>, <F1>
#define START
autoexec.bat
c:\mcc18\h
_asm, _endasm, static
-Opa+, -Opa0, 1
0xFF, ‘A’
file.o, where file can be
any valid filename
mcc18 [options] file
[options]
errorlevel {0|1}
var_name [,
var_name...]
void main (void)
{ ...
}
2016 Microchip Technology Inc.
Preface
RECOMMENDED READING
This user's guide describes how to use RN1810 PICtail/PICtail Plus Daughter Board.
Other useful documents are listed below. The following Microchip document(s) are
recommended as supplemental reference resources.
RN1810/RN1810E 2.4 GHz IEEE 802.11b/g/n Wireless Module Data Sheet
(DS50002460A)
This document provides the technical specifications for the RN1810/RN1810E
modules and is available for download from the Microchip website
(www.microchip.com)
RN1810 WiFly Command Reference User’s Guide (DS50002467A)
This document provides information for configuring the RN1810 module including a
command reference, advanced features, and application examples.
THE MICROCHIP WEBSITE
Microchip provides online support via our website at www.microchip.com. This website
is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the website contains the following information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events; and listings of Microchip sales
offices, distributors and factory representatives
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchip’s customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool of
interest.
To register, access the Microchip website at www.microchip.com, click on Customer
The Development Systems product group categories are:
• Compilers – The latest information on Microchip C compilers and other language
tools
• Emulators – The latest information on the Microchip MPLAB® REAL ICE™
in-circuit emulator
• In-Circuit Debuggers – The latest information on the Microchip in-circuit
debugger, MPLAB ICD 3
• MPLAB X IDE – The latest information on Microchip MPLAB X IDE, the
Windows® Integrated Development Environment for development systems tools
• Programmers – The latest information on Microchip programmers including the
PICkit™ 3 development programmer
2016 Microchip Technology Inc.
DS50002471A-page 9
RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the website at:
http://www.microchip.com/support.
DOCUMENT REVISION HISTORY
Revision A (March 2016)
This is the initial release of this document.
DS50002471A-page 10
2016 Microchip Technology Inc.
RN1810 PICtail™/PICtail PLUS
DAUGHTER BOARD USER’S GUIDE
Chapter 1. Overview
1.1
INTRODUCTION
The RN1810 PICtail™/PICtail Plus Daughter Board is a demonstration board that
showcases the Microchip RN1810 Certified WiFly module, a low-cost IEEE
802.11b/g/n Wi-Fi® Transceiver module. The high-speed UART interface and the I/O
pins are available on the RN1810 module to configure, control, and transfer data.
The RN1810 PICtail Plus Daughter Board has PICtail Plus and PICtail connectors to
interface with a PIC® Microcontroller (MCU) on the development boards that support
PICtail Plus or PICtail interface with the required pin mapping. The PICtail board also
has an MCP2200 USB bridge to enable easy serial connection to a PC over USB.
This document must be used in conjunction with the “RN1810 WiFly Command
Reference User’s Guide” (DS50002467A).
1.2
FEATURES
•
•
•
•
1.3
Microchip RN1810 IEEE 802.11b/g/n Compliant Transceiver
PICtail Plus Daughter Board or PICtail Daughter Board Connection Interfaces
MCP2200 USB Bridge and connector for stand-alone UART terminal operation
Status LEDs, Reset button, and Function button
BOARD CONFIGURATION
Jumper positions on the RN1810 PICtail™/PICtail Plus Daughter Board are as follows:
• Jumper JP5 must be shorted
• Jumpers JP2 and JP3 must be open
• Jumper JP1 must be configured as follows:
- must be shorted when the PICtail is operating stand-alone (only powered via
USB cable)
- must be open when the PICtail is connected to the Microchip development
board
Table 1-1 provides the list of LEDs on the daughter board with its corresponding color
description and pin connection.
TABLE 1-1:
RN1810 LED DESCRIPTION
LED
Color
Description
PWR
Green
Turned on when the RN1810 is powered
TX
Green
Connected to UART0_TX
RX
Green
Connected to UART0_RX
D1
Yellow
Connected to IP_STATUS I/O
D2
Blue
Connected to TCP_STATUS I/O
D3
Green
Connected to CMD_STATUS I/O
D4
Red
Connected to MISC_STATUS I/O
2016 Microchip Technology Inc.
DS50002471A-page 11
RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide
Table 1-2 provides a brief description of the buttons on the board.
TABLE 1-2:
RN1810 BUTTONS
Button(1)
Description
Reset
Performs a Module Reset.
Function
Connected to FUNC_CONFIG pin which is low by
default. Pressing the button sets the FUNC_CONFIG
pin high.
Note 1:
Refer to the “RN1810 WiFly Command Reference User’s Guide”
(DS50002467A) for a detailed description of the I/O pins connected to the
module’s LEDs and buttons.
Figure 1-1 shows the RN1810 PICtail™/PICtail Plus Daughter Board with the Reset
button on the top left side and the Function button below it. On the right-hand side,
lined up vertically, are the four LEDs.
FIGURE 1-1:
RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD
Reset
button
Jumpers
(JP1 & JP5)
Function
button
Jumpers
LEDs
(D1-D4)
(JP3 & JP2)
DS50002471A-page 12
2016 Microchip Technology Inc.
RN1810 PICtail™/PICtail PLUS
DAUGHTER BOARD USER’S GUIDE
Chapter 2. Getting Started
2.1
OVERVIEW
The RN1810 module on the RN1810 PICtail/PICtail Plus Daughter Board exposes a
high speed UART interface which can be used to issue ASCII commands to configure
and control the RN1810 module. For more information on the RN1810 commands, configuration and examples, refer to the “RN1810 WiFly Command Reference User’s
Guide” (DS50002467A).
While in PICtail mode, the board can be plugged into any standard Microchip development board that supports the PICtail Plus or PICtail connection interface.
Note:
Ensure that the PICtail connector pin-out on the host MCU development
platform supports the pin-out on the PICtail interface on the RN1810
PICtail/PICtail Plus Daughter Board.
The firmware running on the Microchip 8/16/32-bit PIC MCU can be used to interface
over UART and I/O ports with the RN1810 on the PICtail board. Refer to the
Section 2.2 “Other Information” for information about downloading PIC workspaces
for PICtail mode.
When the RN1810 PICtail/PICtail Plus Daughter Board is first connected to a PC via
the USB cable, the PC automatically downloads the MCP2200 USB driver. Alternatively, the MCP2200 driver can be downloaded and installed directly from the Microchip
web page at http://www.microchip.com/wwwproducts/en/en546923.
While in MCP2200 UART Bridge mode, the board can be connected via a Micro-USB
cable to a PC that supports serial COM ports where the board immediately enumerates
a serial COM port. A terminal emulator application on the PC can be used to open the
COM port and issue commands when the RN1810 is in Command mode, or to transfer
data when the RN1810 is in Data mode. Typing $$$ while in Data mode transitions the
module to Command mode. There is a 250 ms guard band duration to enter Command
mode. The Command mode is entered only if each dollar sign character ($)is entered
within 250 ms interval, and no other characters are received by the module 250 ms
before the first and after the last $.
Application examples can be found in Chapter 4, Application Examples of the “RN1810
WiFly Command Reference User’s Guide” (DS50002467A).
2.2
OTHER INFORMATION
To obtain the most recent and complete RN1810 Data Sheet, User's Guide and code
examples, visit the Microchip website: www.microchip.com/RN1810.
2016 Microchip Technology Inc.
DS50002471A-page 13
RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide
NOTES:
DS50002471A-page 14
2016 Microchip Technology Inc.
RN1810 PICtail™/PICtail PLUS
DAUGHTER BOARD USER’S GUIDE
Appendix A. Board Schematic
A.1
RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD SCHEMATIC
Figure A-1 shows the RN1810 PICtail/PICtail Plus Daughter Board schematics.
2016 Microchip Technology Inc.
DS50002471A-page 15
RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD SCHEMATIC
1
RB2/SS1/AN2
RF2/U1RX_E
2
3
RF6/SCK1
RF3/U1TX_E
4
RF7/SDI1_E
RG2/SCL1
6
7
RF8/SDO1_E
RG3/SDA1
8
9
GND
STATUS_RDY
RB3/AN3
RB4/AN4
14
GND
16
RD14/U1CTS_E
RE8/INT1
18
CMD_CTRL
20
UART0_CTS
3.3V
22
3.3V
23
5V
5V
24
25
9V
9V
26
RG0
RF0
28
RG1
RF1
30
STATUS_RDY 6
UART0_TX
D1
R21
YELLOW
220R
5%
0402
GND
VDD_3V3
IP_STATUS
IP_STATUS 8
UART0_CTS
UART0_RTS
JP2
WAKEUP
PICTAIL PLUS 30 PIN
R22
BLUE
330R
5%
0402
SLEEP
FUNC_CONFIG
RESET
RESET
R9
VDD_3V3
0402
CMD_CTRL
100k
UART0_RX/MODE0
5%
TCP_CTRL
CMD_CTRL
J3
IP_STATUS
TCP_STATUS
UART0_RTS
MISC_STATUS
VDD_3V3
R17
UART0_RTS
R18
3k
0402
1%
GND
3k
0402
1%
R25
SW2
1k
0402
1%
TACT SPST
2
D+
D-
18
15
C13
GND Island
R12
VDD_3V3
1M
0402
5%
RST
R15
RX
220R
0402
5%
1
0402
R24
RED
220R
5%
0402
VDD_3V3
GREEN
R14
4.7k
0402
5%
GND
Tab
4.7uF
6.3V
0402
Vout
GND
C10
1 2
TC1262-3.3VDBTR
Vin
4
1
C12
0.47uF
6.3V
0402
U1_VOUT
3
C16
0.1uF
16V
0402
GND
C11
4.7uF
6.3V
0402
R13
220R
0402
5%
PWR
GREEN
GND
REG_3V3
NC
2
TEST
17
TEST
18
GND
37
GND
36
GND
34
GND
27
GND
24
G1
GND
16
G2
GND
3
G4
GND
1
G3
GND
GND
37
2
TEST
GND
36
3
GND
VDD
35
4
VDD
GND
34
5
CMD_STATUS
NC
33
6
STATUS_RDY
NC
32
7
UART0_TX
NC
31
8
IP_STATUS
NC
30
NC
29
RN1810 MODULE REFERENCE
9
UART0_CTS
10
UART0_RTS
11
NC
12
TCP_STATUS
13
SLEEP
14
FUNC_CONFIG
12Mhz
C18
GND
18pF
50V
0402
GND
GND
C6
C7
Shunt 2.54mm 1x2
0.1uF
2.2uF
10V
0.1uF
10V
0402
NC
28
GND
27
MISC_STATUS
26
WAKEUP
25
GND
24
Do Not Populate
J2
USB_DN
ART2
HDR-2.54 Male 1x4
GND
3
X1
C17
18pF
50V
0402
VDD_3V3
C5
+5V
TEST
1
M2
JP1
U1
USB2.0 MICRO-AB FEMALE
0.1uF
16V
0402
NC
15
VDD_3V3
+5V
2
P1
0.1uF
16V
0402
GND
0
2016 Microchip Technology Inc.
SGND3
C15
NC
33
MODE1
GP7/TxLED
GREEN
1
D-
NC
TCP_CTRL
VUSB
220R
0402
5%
GND
GND
MISC_STATUS
32
10V 0402
USB_DP
UART0_RX/MODE0
6
GP3
3
TX
GND
D+
WAKEUP
23
7
TX
GP6/RxLED
R16
20
D-
RTS
GP0/SSPND
OSC2
4
OSC1
GP5
VDD
GP1/USB-CFG
19
0.1uF
16V
0402
5
4
3
2
1
MODE1
25
CMD_CTRL
MCP22_RTS
MCP22_TXD
8
MCP22_CTS
MCP22_RXD
12
14
C14
9
10
5
VSS
GP4
13
GND
GND
ID
D+
DVBUS
TCP_CTRL
23
R27
D4
GND
U2
MCP2200 QFN-20
GP2
D+
10000pF
16V
0402
1000pF
25V
0402
UART0_RX/MODE0
22
22
3k
0402
1%
11
17
C3
RX
RESET
16
100k
0402
5%
CTS
R4
C9
CMD_CTRL
21
31
0402
C4
GND
20
NC
VDD_3V3
RESET
RESET
NC
C19
VDD
0402
M1
GND
HDR-2.54 Male 1x2
GND
FUNC_CONFIG
19
30
DNP
VDD
4
GND
JP3
Do Not Populate
TACT SPST
14
DNP
VDD_3V3
VDD
SLEEP
R26
FUNC_CONFIG
35
TCP_STATUS
13
R20
3k
0402
1%
RESET
NC
VDD
GND
R19
1 2
UART0_RTS
1 2
HDR-2.54 Male 1x2
JP5-1
2.2uF
UART0_CTS
29
0.1uF
16V
0402
UART0_CTS
UART0_RX/MODE0
IP_STATUS
11
28
0402
VDD_3V3
UART0_TX
JP5
0.1uF
GND
15
10V
10
MISC_STATUS26
VDD_3V3
VDD
STATUS_RDY
RESET
TCP_CTRL
10k
0402
5%
CMD_STATUS
STATUS_RDY
WAKEUP
CMD_STATUS
C2
2.2uF
VDD
RN1810
21
FUNC_CONFIG
2
4
6
8
10
12
14
16
18
20
22
24
26
28
UART0_RX/MODE0
SLEEP
RA5
RA4
RA3
RC5
RC4
RC3
RA0
RA1
RA2
RC0
RC1
RC2
V_VAR
GND
UART0_CTS
UART0_RX/MODE0
RE2
RE3
RA7/OSC1
RA6/OSC2
RC7
RC6
RB7
RB6
RB5
RB4
RB3
RB2
RB1
RB0
UART0_TX
1
3
5
7
9
11
13
15
17
19
21
23
25
27
UART0_TX
UART0_RTS
RESET
GND
R10
VDD_3V3
WAKEUP
9
TCP_STATUS 12
D2
GND
RESET
7
10V 0402
C1
0402
CMD_STATUS 5
TEST
29
GND
20
27
GND
10V
TEST
21
220R
0402
5%
CMD_STATUS
RD15/U1RTS_E
RE9/INT2
19
VDD_3V3
GND
12
GND
TCP_STATUS 17
UART0_RTS
10
RB1/AN1
R23
GREEN
19
15
GND
RB0/AN0
D3
GND
GND
MISC_STATUS 13
UART0_TX
UART0_RX/MODE0
18
11
5%
220R
VDD
IP_STATUS
R1
0R
0402
17
TCP_CTRL
0402
R2
16
5
1 2
SLEEP
FUNC_CONFIG
1 2 3 4
J1
GND
RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide
DS50002471A-page 16
FIGURE A-1:
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
Germany - Dusseldorf
Tel: 49-2129-3766400
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Hong Kong
Tel: 852-2943-5100
Fax: 852-2401-3431
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
Austin, TX
Tel: 512-257-3370
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-673-0699
Fax: 905-673-6509
China - Dongguan
Tel: 86-769-8702-9880
China - Hangzhou
Tel: 86-571-8792-8115
Fax: 86-571-8792-8116
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Kaohsiung
Tel: 886-7-213-7828
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Germany - Karlsruhe
Tel: 49-721-625370
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Venice
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Poland - Warsaw
Tel: 48-22-3325737
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
07/14/15
DS50002471A-page 17
2016 Microchip Technology Inc.