PIC10F univ_adapter BOM

Microchip Technology Incorporated
M
Distribution Location: T10
2355 W. Chandler Blvd.
Chandler, AZ 85224-6199
Engineering Change Order
ECO Number:
2946
Date:
5/19/2004
Originator:
Sharon O'Campo
Phone:
7343
Supplier Notification:
No
Affected Documents
Product
AC163020
Document Number: Description:
Old Rev:
New Rev:
14-00658
PRODUCT TREE, PIC10F2XX PROGRAMMER ADAPTER
A
12-00658
FINAL ASSY, PIC10F2XX PROGRAMMER ADAPTER
A
05-01793
PCB ARTWORK, PIC10F2XX PROGRAMMER ADAPTER
1
04-01793
PCB FABRICATION, PIC10F2XX PROGRAMMER ADAPTER
1
03-01793
SCHEMATIC, PIC10F2XX PROGRAMMER ADAPTER
1
02-01793-D
PCB ASSEMBLY DWG, PIC10F UNIVERSAL PROGRAMMER
1
02-01793
PCB ASSEMBLY, PIC10F2XX PROGRAMMER ADAPTER
1
Reason for Change:
Release for quote
Description of Change:
Material Disposition:
HW Engineering SW Engineering
Marketing
Documentation
RMA/TEST
5/19/2004
Revs were updated
Description of change was implemented
Packlist is correct
All necessary drawings are in PDF file
Page 1 of 1
Quality
Production
BaaN
Originator
5/19/2004
Microchip Technology Incorporated
2355 W. Chandler Blvd.
Chandler, AZ 85224-6199
M
ASSEMBLY NUMBER:
ASSEMBLY NAME:
Part Number
14-00658
REV: A
LAST ECO: 2946
PRODUCT TREE, PIC10F2XX PROGRAMMER ADAPTER
Rev
Type
12-00658
02-01793
02-01793-D
03-01793
A
1
1
1
BQ
B
D
D
04-01793
05-01793
08-00126
08-00237
1
1
3
1
D
DISK
LBL
LBL
Q.C. Inspection
Part No:
MPCode
Description
FINAL ASSY, PIC10F2XX PROGRAMMER ADAPTER
PCB ASSEMBLY, PIC10F2XX PROGRAMMER ADAPTER
PCB ASSEMBLY DWG, PIC10F UNIVERSAL PROGRAMMER
SCHEMATIC, PIC10F2XX PROGRAMMER ADAPTER
PCB FABRICATION, PIC10F2XX PROGRAMMER ADAPTER
PCB ARTWORK, PIC10F2XX PROGRAMMER ADAPTER
LABEL, NEED HELP WITH ASSY/SERIAL
LABEL, PRODUCT, FINAL ASSY W/SERIAL NO.
* Revision of the Test Procedures are controlled in the Specification Index
Page 1 of 1
AC163020
Date:
Product Tree
M
ASSEMBLY NUMBER:
ASSEMBLY NAME:
Qty
1
02-01793
2
1
-COMMENT-
CR: Cross
CS: Consign
PL: Pack List
12-00658
REV: A
FINAL ASSY, PIC10F2XX PROGRAMMER ADAPTER
Part Number
1
KEY
Microchip Technology Incorporated
2355 W. Chandler Blvd.
Chandler, AZ 85224-6199
Rev
Description
D: Drawing
B: BOM
LBL: Label
Q: Quality Check
Bill of Materials
Manufacturer
C C P
Vendor / Part No R S L
N N Y
Type
1
PCB ASSEMBLY, PIC10F2XX PROGRAMMER ADAPTER
B
N N N PART
N N Y PART
3
1
DS51282
*
DS (Instruction Sheet)
PRODUCT CASE, SMALL TOOLS BOX - 7.75x5.25x1.5
4
1
DS30030
*
DOC, WARRANTY/REGISTRATION CARD
N N Y
DOC
5
1
DS30210
*
DOC, "IMPORTANT INFORMATION" MICROCHIP INFORMATION
N N Y
DOC
6
1
08-00237
1
LABEL, PRODUCT, FINAL ASSY W/SERIAL NO.
N N N
LBL
* In Rev Field: Part Rev is controlled in the Specification Index
Page 1 of 2
M
ASSEMBLY NUMBER:
ASSEMBLY NAME:
Qty
KEY
Microchip Technology Incorporated
2355 W. Chandler Blvd.
Chandler, AZ 85224-6199
CR: Cross
CS: Consign
PL: Pack List
02-01793
REV: 1
PCB ASSEMBLY, PIC10F2XX PROGRAMMER ADAPTER
Part Number
Rev
D: Drawing
B: BOM
LBL: Label
Q: Quality Check
Bill of Materials
Description
Manufacturer
C C P
Vendor / Part No R S L
N N N
Type
1
1
02-01793-D
1
PCB ASSEMBLY DWG, PIC10F UNIVERSAL PROGRAMMER
2
1
03-01793
1
SCHEMATIC, PIC10F2XX PROGRAMMER ADAPTER
N N N
D
3
1
04-01793
1
N N N
D
4
1
CON0051
5
2
SKT0010
PCB FABRICATION, PIC10F2XX PROGRAMMER ADAPTER
PCB1
CONN, MOD JACK 6-6 SIDE ENTRY
ICD
AMP/TYCO
520470-3
DIGI-KEY
SOCKET, 16P DIP 0.300W COLLET MS TIN/TIN
DIP8 ADAPTER (installed bottom side)
MILL-MAX
110-99-316-41-001
DIGIKEY
MILL-MAX
110-93-316-41-001
AMP
2-641610-1
DIGIKEY
MILL-MAX
110-91-316-41-001
SOCKET, 6L SOT23 CLAMSHELL W/ POSTS
SOT23
WELLS-CTI
499-P44-10
CONN, HDR, 1x6 POS, 0.100", BREAKAWAY, RA, (0.230/0.090)
BFMP
AMP
103765-6
SAMTEC
TSW-106-08-G-S-RA
CONN, HDR, 1x14 POS, 0.100", BREAKAWAY, RA, (0.230/0.090)
PICKIT
AMP
1-103765-4
SAMTEC
TSW-114-08-G-S-RA
6
1
SKT0100
7
1
CON0107
8
1
CON0094
9
2
CON0020
10
4
SJ-5518
11
1
08-00126
CONN, HDR, 1x4 0.100 (0.210") 0.018 ROUND
ADAPTER (wrapped in plastic baggie)
SAMTEC
BBS-104-G-A
MISC, RUBBER FEET, 0.50 SQ 0.23 HIGH BLACK
3
LABEL, NEED HELP WITH ASSY/SERIAL
* In Rev Field: Part Rev is controlled in the Specification Index
N N N PART
A9049-ND
N N N PART
ED3116-ND
A24809-ND
N N N PART
N N N PART
N N N PART
N N N PART
3M
DIGIKEY
SJ5518-0-ND
N N N PART
N N N
Page 2 of 2
D
LBL
M
Microchip Technology Incorporated
2355 W. Chandler Blvd.
Chandler, AZ 85224-6199
ASSEMBLY NUMBER:
14-00658
ASSEMBLY NAME:
PRODUCT TREE, PIC10F2XX PROGRAMMER ADAPTER
12-00658
REV:
A
Product No:
FINAL ASSY, PIC10F2XX PROGRAMMER ADAPTER
Qty
DS30210
DS30030
1
-COMMENT-
1
02-01793
Pack List
Rev:
Part Number
1
1
AC163020
Description
DOC, "IMPORTANT INFORMATION" MICROCHIP INFORMATION
DOC, WARRANTY/REGISTRATION CARD
PCB ASSEMBLY, PIC10F2XX PROGRAMMER ADAPTER
Page 1 of 1
A
CAMtasticDXP (TM): 05-01793r1.asy
CAMtasticDXP (TM): 05-01793r1.fab
Label Definition
M
Need Help Label with Serial Number
08-00126 Rev 3
Need Help?
www.microchip.com
1-800-755-2345 or 480-792-7302
Assy# 10-00157-R2 Serial# JIT971217076
Label Information
Label Size: 0.5” x 2.0”
Text Size
Need Help? (8pt, Bold)
Assembly Number, Serial Number, Revision: (7pt)
Development Systems Info Line (7pt)
1-800-755-2345 or 480-792-7302 (7pt)
Graphics
Microchip Logo provided as a true type font. (~24pt)
Label Data
Need Help? (10pt, Bold, Centered)
www.microchip.com (8pt, centered)
1-800-755-2345 or 480-792-7302 (8pt, Centered)
Assy# (9pt, Left)
Serial# (9pt, Right)
Part Number
Part Number of the assembly that calls out the label
Revision
R1 - Revision of the assembly that calls out the label
Serial Number:
JIT- Manufacturer ID
95 - Year (95....)
28 - Work week product shipped (01-52)
1 - Lot number (1-9)
0001 - Sequence Piece Number (0001 - 9999) Starts over with each new lot number.
Location
The 08-00126 label is to be located on the assembly that calls out the label.
Product Label, Small, W/barcode
08-00237 Rev 1
Label Information
Label Size: 1" x 3"
(Deviations need to be approved by Microchip)
Brady: THT-18-423-3
Text (Times New Roman)
Product Description: ~10 Point
Part Number Data, Serial Number Data: 10 Point
Part Number & Description are provided in the header area of the 14-xxxxx final assembly BOM
for the product that this label will be attached to.
Barcode Information
Barcode is Code 39 format (3 of 9)
Barcode Height is 0.150”
Ratio is 2.5:1 (Deviations need to be approved by Microchip)
Density is 5.29 cpi (Deviations need to be approved by Microchip)
Text is Times New Roman (Deviations need to be approved by Microchip)
Serial Number:
JIT- Manufacturer ID
95 - Year (95....)
28 - Work week product shipped (01-52)
1 - Lot number (1-9)
0001 - Sequence Piece Number (0001 - 9999) Starts over with each new lot number.
Graphics
None
Location
This label is attached to the outside of the cardboard product case. This label should not be
attached to the top or bottom of the product case.
Vendor to insure that the serial number corresponds to the serial number assigned to the main
electro-mechanical assembly contained in this product case. Except this label drops off the last
two characters representing the rev level of the main assembly.