FM4001F THRU FM4007F SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any SMAF MECHANICAL DATA MAX 1.05 0.15 ( 0.006 ) 0.11 ( 0.004 ) * Epoxy : Device has UL flammability classification 94V-0 2.8 ( 0.110 ) 2.4 ( 0.094 ) 5.4 ( 0 .2 1 3 4. 8 ( 0.1 8 9 ( ( ( ( 4 (0.1 5 7 3.4 (0.1 3 4 5°± 2° 1.25 (0.049 ( Dimensions in millimeters and (inches) 1.65 (0.065 o Ratings at 25 C ambient temperature unless otherwise specified. resistive or inductive load. ( 1.3 ( 0.051) .) 0.7(0.028 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0 MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) FM4007F UNITS SYMBOL FM4001F FM4002F FM4003F FM4004F FM4005F FM4006F Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Ambient Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 1.0 Amps I FSM 30 Amps 3.7 A 2 /Sec 2 I t Current Squarad Time Volts Typical Thermal Resistance (Note 1) RθJA Typical Thermal Resistance (Note 1) RθJL Typical Junction Capacitance (Note 2) CJ 15 Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Storage Temperature Range 80 27 30 0 C/W 0 C/W pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC FM4001F VF Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 C o IR NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "Fully ROHS compliant","100% Sn plating (Pb-free)". FM4002F FM4003F FM4004F FM4005F FM4006F FM4007F UNITS 1.0 Volts 1.0 uA 50 uA 2015-10 REV:O 2.0 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.5 0 0 25 50 75 100 125 150 175 1000 INSTANTANEOUS FORWARD CURRENT, (? A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( FM4001F THRU FM4007F ) 100 TA = 100 OC 10 TA = 25 OC 1.0 0.1 0.01 0 20 O AMBIENT TEMPERATURE, ( C) 10 1.0 0.1 TJ = 25 OC Pulse width=300? S 1% Duty Cycle 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 60 4.0 4.5 40 100 120 140 TJ = 25 OC 20 10 8 6 4 2 1 5.0 0.4 0.1 1.0 4 10 40 80 REVERSE VOLTAGE, (V) FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 TYPICAL JUNCTION CAPACITANCE 30 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 0 1 80 FIG.2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE, (V) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) CJ, JUNCTION CAPACITANCE, (pF) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 20 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Marking Description A X V Y W W Cathode Band Year – code (Y:Last digit of year & A:2010,B:2011......) Part No. Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V Week – code (WW:01~52) REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-FLAT MELF ( SMAF ) D1 D2 W1 D Fig.: Configuration of FLAT MELF TAPING (SMAF) ITEM Carrier width Carrier length Carrier depth Sprocket hole SYMBOL A B C D0 Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch D D1 D2 E F P Sprocket hole pitch Embossment center Totall tape thickness Tape width Reel width P0 P1 T W W1 2.9 SMAF mm(inch) 0.10 (0.114 0.004) 5.35 0.10 (0.211 0.004) 1.15 0.10 (0.045 0.004) 1.55 0.05 (0.061 0.002) 178 2.0 (7.0 0.079) 50 Min. 13 0.5 (0.512 0.020) 1.75 0.1 (0.069 0.004) 5.50 0.05 (0.217 0.002) 4.0 0.1 (0.157 0.004) 4.0 0.1 (0.157 0.004) 2.0 0.05 (0.079 0.002) 0.23 0.02 (0.009 0.001) 0.3 12.0 0.1 (0.472 16.8 2.0 (0.661 Note: 1.Devices are packed in accordance with EIA standard RS-481-D and specification given above. 2.Available on 7 inch ( 1500 ct. ) or 13 inch ( 5000 ct. ) diameter reels. 0.012 0.004 ) 0.079) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX SMAF -T 3,000 12,000 --- --- 178 390*205*310 96,000 --- SMAF -W 10,000 20,000 --- --- 330 360*355*360 160,000 --- DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.