SLDB101S THRU SLDB107S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * * Good for automation insertion Surge overload rating - 30 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.33 gram SLDBS MECHANICAL DATA .009(0.220) .177 (4.5) .169 (4.3) .236 (6.0) .252 (6.4) * Epoxy: Device has UL flammability classification 94V-O .007(0.180) .0039 (0.100) .028 (0.700) .0036 (0.092) .012 (0.300) .028 (0.7) .020 (0.5) .135 (3.45) .127 (3.25) .200 (5.1) .192 (4.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAX .059 (1.5) Ratings at 25 o C ambient temperature unless otherwise specified. .161 (4.1) .153 (3.9) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL SLDB101S SLDB102S SLDB103S SLDB104S SLDB105S SLDB106S SLDB107S RATINGS Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Bridge Input Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Output Current at T A = 40 oC 50 400 600 800 1000 UNITS 100 200 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts Volts IO 1.0 Amps I FSM 30 Amps I 2t 3.7 A2/S Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time R θJA 62.5 RθJL 25 T J, T STG -55 to + 150 Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range 0 C/W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) SYMBOL SLDB101S SLDB102S SLDB103S SLDB104S SLDB105S SLDB106S SLDB107S CHARACTERISTICS Maximum Forward Voltage Drop per Bridge VF Element at 1.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C IR Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Thermal Resistance: Mounted on PCB. 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. 1.1 UNITS Volts 5.0 uAmps 0.5 mAmps 2013-03 REV:B 30 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 5 0 0 2 4 6 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( SLDB101S THRU SLDB107S ) 10 1 0.1 0.01 TJ = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 NUMBER OF CYCLES AT 60Hz 1.5 TA = 125 OC AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1000 100 10 1.0 0.1 0 TA = 25 OC 20 40 60 80 100 0.4 0.8 1.2 1.6 2.0 INSTANTANEOUS FORWARD VOLTAGE, (V) 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .252 Max. (6.40 Max.) .165 (4.2) .150 (3.8) .028Min. (0.70Min.) Dimensions in inches and (millimeters) .028 Min. (0.70 Min.) REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-SLDBS P0 P1 d E F B A P o T W MAX. 3 A R o MAX. 3 W1 D C Fig.: Configuration of SLDBS TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole D1 D2 SYMBOL A B C d SLDBS mm(inch) 6.0 0.1 (0.236 0.004) 8.30 0.1 (0.327 0.004) 2.5 0.1 (0.098 0.004) 1.5 0.1 (0.059 330 2.0 (13.0 0.004) 0.079) Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch D D1 D2 E F P 50 Min. 13 0.5 (0.512 0.020) 1.5 0.1 (0.059 0.004) 7.65 0.05 (0.301 0.002) 8.0 0.1 (0.315 0.004) Sprocket hole pitch Embossment center Totall tape thickness Tape width Reel width P0 P1 T W W1 0.1 (0.157 0.004) 0.1 (0.157 0.004) 0.6 Max. 16.0 0.2 (0.630 0.008) 24.0 2.0 (0.945 0.079) 4.0 4.0 Note: 1.Devices are packed in accordance with EIA standard RS-481-A and specification given above. 2.13 inch ( 5000 ct. ) diameter reels. 1. BOX Packing L W H Code (mm) (mm) (mm) -T 450 140 84 2. REEL D Packing D Code (mm) -T 330 Packing L W H Code (mm) (mm) (mm) -T 355 360 185 3. CARTON Marking Description - + Rectron Logo Part No. A X Voltage-code ~ V Y WW ~ Year – code: (Y:Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-----1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SLDBS PACKING EA PER REEL CODE -T 5,000 COMPONENT TAPE SPACE SPACE(mm) (mm) --- --- REEL DIA CARTON SIZE (mm) EA PER CARTON 330 355*360*185 40,000 (mm) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.