Product datasheet DIM PICO | Stand-alone daylight sensors with 1…10 V dimming interface Areas of application _ Individual luminaires __ Product benefits _ Energy savings up to 30 % (compared to CCG + T8 lamp, without sensors) _ Compensates for 50 % of the incoming daylight _ Direct connection to the 1…10 V interface _ Simple setting of the set point via aperture Product features _ 1…10 V light sensor _ Simple clip-on installation for T8 and T5 lamps _ Cable length: 700 mm May 25, 2016, 17:31:26 © 2016, OSRAM GmbH. All rights reserved. Page 1 of 3 Product datasheet Technical data Dimensions & weight Length 21.0 mm Width 21.0 mm Height 31.0 mm Product weight 22.00 g Colors & materials __ Product color White Temperatures & operating conditions Ambient temperature range +5…+55 °C Capabilities Dimmable No Dimming interface 1…10 V Maximum installation height 4m Detection angle 50 ° 1) Number of control outputs 1 Type of installation Luminaire integration/Clip on lamp 1) Approximately Certificates & standards Type of protection IP20 Protection class III Equipment / Accessories _ Suitable for up to 10 electronic control gears May 25, 2016, 17:31:26 © 2016, OSRAM GmbH. All rights reserved. Page 2 of 3 Product datasheet Download Data File Brochures Energy saving Declarations of conformity Declaration of conformity DIM MICO DIM PICO Installation guide Technical instructions Logistical Data Product code Product description 4050300554457 Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight Shipping carton box 20 272 mm x 155 mm x 163 mm 6.87 dm³ 926.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Disclaimer __ Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. May 25, 2016, 17:31:26 © 2016, OSRAM GmbH. All rights reserved. Page 3 of 3