SRS160HE/U SRS180HE/U SRS1100HE/U SENSITRON ___ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 119, REV. A HERMETIC AXIAL LEAD RECTIFIER DESCRIPTION: A 600 / 800 / 1000 VOLT, 60NS AXIAL LEAD DIODE Features: • • Double plug metalurgically bonded construction Avalanche energy capability All ratings are at TA = 25oC unless otherwise specified. MAXIMUM RATINGS RATING CONDITIONS Peak Inverse Voltage, PIV - MIN TYP UNIT Volts - - SRS160HE/U SRS180HE/U SRS1100HE/U Average DC Output Current (Io) MAX 600 800 1000 @ TA = 55oC - - o @ TA = 100 C .75 Amps .60 Peak Single Cycle Surge Current (Ifsm) tp = 8.3 ms Single Half Cycle Sine Wave, Superimposed On Rated Load - - Thermal Resistance (RθJL) Junction to Lead - - Pkg 105 d = 0.375” 20 Amps(pk) °C/W 38 MELF-1 10 Operating and Storage Temp. (Top & Tstg) - - +175 °C MIN TYP MAX UNIT - - 1.7 Volts - - 5.0 -55 ELECTRICAL CHARACTERISTICS RATING 1 CONDITIONS Maximum Forward Voltage (Vf) 1 IF = .75A Maximum Instantaneous Reverse Current At Rated PIV (Ir) 1 TA = 25° C TA = 100° C Maximum Reverse Recovery Time IF = 0.5A, IR = 1A, IREC = 0.25A @ TA = 25°C - - 50 μAmps μAmps 70 ns 300 μsec pulse, duty cycle < 2% ©1997 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected] • SRS160HE/U SRS180HE/U SRS1100HE/U SENSITRON TECHNICAL DATA DATA SHEET 119, REV. A MECHANICAL DIMENSIONS In Inches / (mm), min./max. ©1997 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected] • SENSITRON SRS160HE/U SRS180HE/U SRS1100HE/U TECHNICAL DATA DATA SHEET 119, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©1997 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected] •