EVB-USB2240-IND
User’s Manual, Rev C
2014 Microchip Technology Inc.
DS50002298B
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer,
LANCheck, MediaLB, MOST, MOST logo, MPLAB,
OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC,
SST, SST Logo, SuperFlash and UNI/O are registered
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
The Embedded Control Solutions Company and mTouch are
registered trademarks of Microchip Technology Incorporated
in the U.S.A.
Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo,
CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit
Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet,
KleerNet logo, MiWi, MPASM, MPF, MPLAB Certified logo,
MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code
Generation, PICDEM, PICDEM.net, PICkit, PICtail,
RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total
Endurance, TSHARC, USBCheck, VariSense, ViewSpan,
WiperLock, Wireless DNA, and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
GestIC is a registered trademarks of Microchip Technology
Germany II GmbH & Co. KG, a subsidiary of Microchip
Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2014, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
ISBN: 978-1-63276-459-1
QUALITYMANAGEMENTSYSTEM
CERTIFIEDBYDNV
== ISO/TS16949==
DS50002298B-page 2
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
2014 Microchip Technology Inc.
EVB-USB2240-IND Evaluation Board User’s Guide
Object of Declaration: EVB-USB2240-IND
2014 Microchip Technology Inc.
DS50002298B-page 3
EVB-USB2240-IND Evaluation Board User’s Guide
NOTES:
2014 Microchip Technology Inc.
DS50002298B-page 4
EVB-USB2240-IND
EVALUATION BOARD
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 7
Introduction............................................................................................................ 7
Document Layout .................................................................................................. 7
Conventions Used in this Guide ............................................................................ 8
The Microchip Web Site ........................................................................................ 9
Development Systems Customer Change Notification Service ............................ 9
Customer Support ................................................................................................. 9
Document Revision History ................................................................................. 10
Chapter 1. Overview
1.1 Introduction ................................................................................................... 11
1.2 Features ....................................................................................................... 11
1.3 General Description ...................................................................................... 11
Chapter 2. Getting Started
2.1 Hardware ...................................................................................................... 15
2.1.1 Configuration ................................................................................. 15
2.1.2 Powered State LED ....................................................................... 15
2.1.3 Activity LED ................................................................................... 15
2.1.4 Media Interface .............................................................................. 15
2.1.5 Connector Description ................................................................... 16
2.1.6 Power source - Self/Bus Powered ................................................. 16
2.1.7 Configuration source - USB Upstream .......................................... 16
2.1.8 Layout Considerations ................................................................... 16
Chapter 3. Appendix A. EVB-USB2240-IND Evaluation Board
A.1 Introduction .................................................................................................. 19
Appendix B. EVB-USB2240-IND Evaluation Board Schematics
B.1 Introduction .................................................................................................. 21
Appendix C. Bill of Materials (BOM)
C.1 Introduction .................................................................................................. 23
Worldwide Sales and Service .................................................................................... 27
2014 Microchip Technology Inc.
DS50002298B-page 5
EVB-USB2240-IND Evaluation Board User’s Guide
NOTES:
DS50002298B-page 6
2014 Microchip Technology Inc.
EVB-USB2240-IND
EVALUATION BOARD
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
EVB-USB2240-IND. Items discussed in this chapter include:
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
The Microchip Web Site
Development Systems Customer Change Notification Service
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes how to use the EVB-USB2240-IND Evaluation Board as a
development tool for the USB2240 Ultra Fast USB 2.0 Flash Media Controller. The
manual layout is as follows:
• Chapter 1. “Overview” – Shows a brief description of the EVB-USB2240-IND
Evaluation Board.
• Chapter 2. “Getting Started” – Includes instructions on how to get started with
the EVB-USB2240-IND Evaluation Board.
• Appendix A. “EVB-USB2240-IND Evaluation Board” – This appendix shows
the EVB-USB2240-IND Evaluation Board.
• Appendix B. “EVB-USB2240-IND Evaluation Board Schematics” – This
appendix shows the EVB-USB2240-IND Evaluation Board schematics.
• Appendix C. “Bill of Materials (BOM)” – This appendix includes the
EVB-USB2240-IND Evaluation Board Bill of Materials (BOM).
2014 Microchip Technology Inc.
DS50002298B-page 7
EVB-USB2240-IND Evaluation Board User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description
Arial font:
Italic characters
Represents
Referenced books
Emphasized text
A window
A dialog
A menu selection
A field name in a window or
dialog
A menu path
MPLAB® IDE User’s Guide
...is the only compiler...
the Output window
the Settings dialog
select Enable Programmer
“Save project before build”
A dialog button
A tab
A number in verilog format,
where N is the total number of
digits, R is the radix and n is a
digit.
A key on the keyboard
Click OK
Click the Power tab
4‘b0010, 2‘hF1
Italic Courier New
Sample source code
Filenames
File paths
Keywords
Command-line options
Bit values
Constants
A variable argument
Square brackets [ ]
Optional arguments
Curly brackets and pipe
character: { | }
Ellipses...
Choice of mutually exclusive
arguments; an OR selection
Replaces repeated text
#define START
autoexec.bat
c:\mcc18\h
_asm, _endasm, static
-Opa+, -Opa0, 1
0xFF, ‘A’
file.o, where file can be
any valid filename
mcc18 [options] file
[options]
errorlevel {0|1}
Initial caps
Quotes
Underlined, italic text with
right angle bracket
Bold characters
N‘Rnnnn
Text in angle brackets < >
Courier New font:
Plain Courier New
Represents code supplied by
user
DS50002298B-page 8
Examples
File>Save
Press <Enter>, <F1>
var_name [,
var_name...]
void main (void)
{ ...
}
2014 Microchip Technology Inc.
Preface
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite Internet browser, the web site contains the following
information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchip’s customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool of
interest.
To register, access the Microchip web site at www.microchip.com, click on Customer
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
• Compilers – The latest information on Microchip C compilers, assemblers, linkers
and other language tools. These include all MPLAB C compilers; all MPLAB
assemblers (including MPASM assembler); all MPLAB linkers (including MPLINK
object linker); and all MPLAB librarians (including MPLIB object librarian).
• Emulators – The latest information on Microchip in-circuit emulators.This
includes the MPLAB REAL ICE and MPLAB ICE 2000 in-circuit emulators.
• In-Circuit Debuggers – The latest information on the Microchip in-circuit
debuggers. This includes MPLAB ICD 3 in-circuit debuggers and PICkit 3 debug
express.
• MPLAB IDE – The latest information on Microchip MPLAB IDE, the Windows
Integrated Development Environment for development systems tools. This list is
focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and
MPLAB SIM simulator, as well as general editing and debugging features.
• Programmers – The latest information on Microchip programmers. These include
production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB
ICD 3 in-circuit debugger and MPLAB PM3 device programmers. Also included
are nonproduction development programmers such as PICSTART Plus and
PIC-kit 2 and 3.
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
2014 Microchip Technology Inc.
DS50002298B-page 9
EVB-USB2240-IND Evaluation Board User’s Guide
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at:
http://www.microchip.com/support
DOCUMENT REVISION HISTORY
Revision A (July 2014)
• Initial Release of this Document.
Revision B (September 2014)
• Update to Section 1.2 “Features”
DS50002298B-page 10
2014 Microchip Technology Inc.
EVB-USB2240-IND
EVALUATION BOARD
USER’S GUIDE
Chapter 1. Overview
1.1
INTRODUCTION
The EVB-USB2240-IND is an Ultra Fast USB 2.0 Multi-Slot Flash Media Controller with
Secure Digital (SD), MultiMediaCardTM (MMC), Memory Stick® (MS), and xD-Picture
CardTM (xD) connectors. The EVB-USB2240-IND demonstrates a standalone application for developers of the following applications: Flash Media Card Reader/Writer, printers, desktop and mobile PCs, consumer A/V, and flat panel displays, among others.
1.2
FEATURES
The EVB-USB2240-IND provides the following features:
• 36-Pin QFN (RoHS compliant) package.
• Supports these Media Types on Media I/F:
- Secure Digital (SD2.0, HS-SD, HC-SD)
- MultiMediaCardTM 4.2
- xD-Picture CardTM (population deprecated on modern assemblies)
- Memory Stick® 1.43
- High Speed Memory StickTM
- Memory Stick Pro-HGTM
- Memory Stick Duo Memory Stick ProTM
• Internal FET power switch for all media types; no external power FETs needed.
• Optionally supports external configuration.
- External I2C EEPROM for configuration options (optional).
• Low cost 4-Layer space saving design.
• Self-powered or bus-powered operation.
• Operates from a single voltage (+5.0 VDC, regulated) external power supply or
from VBUS.
• Single onboard +3.3 VDC regulator.
• Optional +3.3 VDC media power LED indicator.
• Activity LED indicator.
• Single crystal clock source.
1.3
GENERAL DESCRIPTION
The EVB-USB2240-IND is an evaluation and demonstration platform featuring the
USB2240 Ultra Fast USB 2.0 Flash Media Controller on a 4-layer RoHS compliant
printed circuit board.
The EVB-USB2240-IND is designed to demonstrate the unique features of this device
using a low-cost PCB implementation. It is designed to support internal default configuration settings and an external I2C EEPROM (optional) for customized configured
functionality. When an I2C EEPROM device is populated on the evaluation board it provides customizing via USB by using the Microchip-provided USBDM utility, as required.
2014 Microchip Technology Inc.
DS50002298B-page 11
EVB-USB2240-IND Evaluation Board User’s Guide
The EVB-USB2240-IND is compatible with the following:
•
•
•
•
•
•
Microsoft® Vista
Windows® XP
Windows® ME
Windows® 2k SP4
Apple® OS X
Linux® Mass Storage Class Drivers.
Schematics, Layout, and Bill of Materials are included minimizing new product development time.
FIGURE 1-1:
DS50002298B-page 12
TOP LEVEL SILK SCREEN AND COPPER LAYER
2014 Microchip Technology Inc.
FIGURE 1-2:
2014 Microchip Technology Inc.
BOTTOM LEVEL SOLDIER SIDE AND COPPER LAYER
DS50002298B-page 13
EVB-USB2240-IND Evaluation Board User’s Guide
NOTES:
DS50002298B-page 14
2014 Microchip Technology Inc.
EVB-USB2240-IND
EVALUATION BOARD
USER’S GUIDE
Chapter 2. Getting Started
2.1
HARDWARE CONFIGURATION
The EVB-USB2240-IND has one onboard regulator, which generates +3.3 VDC from
an external +5 VDC regulated power supply. The USB2240 generates its own +1.8
VDC for internal use using on-chip +1.8 VDC regulators. The internal 1.8 Volt regulator
to the oscillator and PLL is turned off during suspend to minimize suspend current. The
USB2240 consumes power from the 3.3 Volt supply.
2.1.1
Configuration
Default: The EVB-USB2240-IND has been set up to support internal default configuration as determined by the empty state (no valid signature ID) of the EEPROM immediately after reset. When no valid EEPROM image is detected, the Vendor ID, Product
ID, Language ID, and Device ID, and a few other choices are set using ROM code
defaults.
EEPROM Option: The EVB-USB2240-IND can load configuration from an external
two-wire, I2C EEPROM U2. The EEPROM must be installed in socket U2. The
EEPROM may be pre-programmed before installation, or it can be programmed with
the USB host using the provided Microchip USBDM application.
This option allows access to all of the configuration registers and ID strings for the
USB2240 device for detailed functional analysis and exercise as desired. The
EVB-USB2240-IND is compatible with I2C EEPROMs from several manufacturers.
The memory capacity must be at least 512 bytes.
2.1.2
Powered State LED
An optional LED, LED1, indicates when +3.3 VDC power is present on the media sockets.
2.1.3
Activity LED
LED3 indicates when the USB2240 is active, as defined by firmware.
2.1.4
Media Interface
The USB2240 supports a wide array of devices. Media Interface accommodates all of
the media types supported through the use of three media socket connectors. Adapters
may be needed for some form factors.
• J1 supports SD media up to the specification limit of 4 bits wide. It also supports
MMC media up to the specification 4.2 of 8 bits wide.
• J2 supports xD-Picture Card media.
• J3 supports MS, MS Pro, MS Duo, and MS Pro-HG media at up to the specification limit of 8 bits wide.
Since these connectors are all on the same media bus, only one device is allowed to
be inserted into any of these media socket connectors at one time for the Media Interface.
2014 Microchip Technology Inc.
DS50002298B-page 15
EVB-USB2240-IND Evaluation Board User’s Guide
2.1.5
Connector Description
The EVB-USB2240-IND has a standard USB style connector of type B for the upstream
port. It also has a standard set of media storage style connectors, which supports popular flash media formats from the xD, MS, SD, and MMC families. Power is supplied
via a 2.0 mm power jack. Table 2.1 lists all of the connectors. For more details on the
pinout of the connectors please schematics in Figure B-1.
TABLE 2-1:
CONNECTOR DESCRIPTION
CONNECTOR
TYPE
DESCRIPTION
J1
SD/MMC4.0
SD/MMC I/F
J2
xD
xD I/F
J3
MS/MS Duo/MS Pro-HG
MS I/F
2.1.6
J5
Header
GPIO Test - DNP
J6
Power Jack 2.0 mm
+5 VDC Power Supply - DNP
J7
USB 2.0 Style B
Upstream Port
J1
SD/MMC4.0
SD/MMC I/F
Power source - Self/Bus Powered
The EVB-USB2240-IND supports both self and bus powered operation. By default the
EVB-USB2240-IND is populated for bus powered operation. Refer to the table Table
2.2 below for resistor population options to change the power source.
TABLE 2-2:
POPULATION OPTIONS FOR SELF OR BUS POWERED
OPERATION
POWER SOURCE
R14
R16
Bus Powered (Default)
Populate
DNP
Self Powered
DNP
Populate
Note:
2.1.7
DNP = Do not populate.
Configuration source - USB Upstream
The Microchip configuration tool named USBDM, see USB2240 Software Release
Notes for details (https://www2.smsc.com/mkt/CW_SFT_PUB.nsf/Agreements/OBJ+Card+Reader), can configure the EEPROM when it is populated. USBDM
can modify Vendor ID, Product ID, Language ID, Device ID, and configuration settings,
see Figure 2.1.
2.1.8
Layout Considerations
The EVB-USB2240-IND is designed on four PCB layers: two signal layers and two supply layers. The PCB layer stack is shown in Table 2.3. All signals are routed on top and
bottom layers. The internal layers are ground and power. Note that the media I/F signals flow easily to their destination connectors simplifying routing of critical signals.
DS50002298B-page 16
2014 Microchip Technology Inc.
TABLE 2-3:
PCB LAYER STACK
Layer 1
Component Side
1.3 - 2.3 oz. Cu finished wt.
Layer 2
Ground Plane
1 oz. nominal Cu wt.
Core
~25 mil FR-4
Layer 3
Power Plane
1 oz. nominal Cu wt.
Layer 4
Solder Side
1.3 - 2.3 oz Cu finished wt.
4.0 - 4.5 mil FR-4
40 mil (+/- 6 mil)
4.0 - 4.5 mil FR-4
The component side top layer is shown in Figure 1-1 with silk screen information to
identify component locations. Solder side and bottom layer is shown in Figure 1-2.
2014 Microchip Technology Inc.
DS50002298B-page 17
EVB-USB2240-IND Evaluation Board User’s Guide
NOTES:
DS50002298B-page 18
2014 Microchip Technology Inc.
EVB-USB2240-IND
EVALUATION BOARD
USER’S GUIDE
Appendix A. EVB-USB2240-IND Evaluation Board
A.1
INTRODUCTION
This appendix shows the EVB-USB2240-IND Evaluation Board.
FIGURE A-1:
EVB-USB2240-IND EVALUATION BOARD
2014 Microchip Technology Inc.
DS50002298B-page 19
NOTES:
DS50002298B-page 20
2014 Microchip Technology Inc.
EVB-USB2240-IND
EVALUATION BOARD
USER’S GUIDE
Appendix B. EVB-USB2240-IND Evaluation Board
Schematics
B.1
INTRODUCTION
This appendix shows the EVB-USB2240-IND Evaluation Board Schematics.
2014 Microchip Technology Inc.
DS50002298B-page 21
EVB-USB2240-IND EVALUATION BOARD SCHEMATIC 1
FB1
2A/0.05DCR
USB_B-REC
RA-THRU
J7
VCC
D+
DGND
SH1
SH2
1
3
2
VBUS
USBDP
USBDM
4
5
6
FB2
U1
5V_USB
2A/0.05DCR
EMI
R19
330
C20
0.1uF
USBDP
2
USBDM
3
USB2240
USBDP
QFN36B
RBIAS
USB
35
RBIAS
1
LED1
R10
1%
EVB-USB2240-IND Evaluation Board User’s Guide
DS50002298B-page 22
FIGURE B-1:
12.0K
USBDM
3V3
tp8
DNP
R11
100K
C15
<TDO>(LED1)GPIO1
18
RT19
33
(RXD)GPIO2
<TCK>(XD_ID) GPIO4
27
GPIO2_R
29
GPIO4
RT1
TEST
(TXD)GPIO7
33
1K
R3
10K
XTAL1
(CRD_PWR2)GPIO10
31
GPIO7_R
21
CRD_PWR2
24
MS-8-bit
Optional EEPROM
R18
10K
DNP
U2 24C04-DFN8
GPIO2
33
tp9
DNP
R21
28
R20
Bright_GRN
0.1uF
XTAL1
"Activity"
LED3
LED1_R
RESET
C12
R13
100K
1.0uF
GPIO
Miscellaneous
nRESET
(xD_nCD/xD_nID)
10K
1
2
3
7
3V3
RT2
33 GPIO7
MS_INS_R
RT20
Zero MS_INS
19
GPIO14_R
RT21
Zero GPIO14
26
SD_nCD_R
RT22
Zero SD_nCD
(SCL)
(SDA)
6
5
A0
A1
A2
WP
VCC
SCL
SDA
GND
flag
3V3
8
C17
0.1uF
4
9
"Card Power"
LED1
<TDI>(MS_INS) GPIO12
R15
1Meg
Y1
24.000MHz
<TMS>(SM_nCD) GPIO14
(SM_nCD)
<TRST>(SD_nCD) GPIO15
1K
Optional
CRD_PWR2
C19
18pF
R4
Bright_GRN
Optional
C14
18pF
C8
4.7uF
C24
+ C9
47uF
DNP
R7
2.2K
0.001uF
32
XTAL2
Card I/F
Power
VDD18PLL
Populate ONLY for
special high-current
media devices.
XTAL2
34
VDD18PLL
C11
J2
tp1
DNP
XD
18
1.0uF
13
VDD18
SD_D6/MS_D7/SM_D0
SD_D7/MS_D6/SM_D1
SD_D0/MS_D4/SM_D2
SD_D1/MS_D5/SM_D3
GPIO6(SD_WP)/MS_CLK/SM_D4
SD_D2/SM_D5
SD_D3/MS_D3/SM_D6
<Atest>SD_D4/MS_D2/SM_D7
VDD18/VDDCR
C3
1.0uF
3V3
6
22
14
C27
C4
C6
C5
4.7uF
0.1uF
0.1uF
0.1uF
VDD33
VDD33
VDD33/VDDCRREF
36
SD_D5/MS_D1/SM_ALE
SD_CMD/MS_D0/SM_CLE
SM_RE
SM_WE
SD_CLK/MS_BS/SM_WP
SM_CE
8
7
5
4
30
25
23
20
SD_D6/MS_D7/SM_D0_R
SD_D7/MS_D6/SM_D1_R
SD_D0/MS_D4/SM_D2_R
SD_D1/MS_D5/SM_D3_R
GPIO6<SD_WP>/MS_CLK/SM_D4_R
SD_D2/SM_D5_R
SD_D3/MS_D3/SM_D6_R
<Atest>SD_D4/MS_D2/SM_D7_R
RT3
RT4
RT5
RT6
R12
RT7
RT8
RT9
33
33
33
33
33
33
33
33
SD_D6/MS_D7/SM_D0
SD_D7/MS_D6/SM_D1
SD_D0/MS_D4/SM_D2
SD_D1/MS_D5/SM_D3
GPIO6<SD_WP>/MS_CLK/SM_D4
SD_D2/SM_D5
SD_D3/MS_D3/SM_D6
<Atest>SD_D4/MS_D2/SM_D7
10
11
16
12
9
15
SD_D5/MS_D1/SM_ALE_R
SD_CMD/MS_D0/SM_CLE_R
SM_nRE_R
SM_nWE_R
SD_CLK/MS_BS/SM_nWP_R
SM_nCE_R
RT10
RT11
RT12
RT13
R5
RT17
33
33
33
33
33
33
SD_D5/MS_D1/SM_ALE
SD_CMD/MS_D0/SM_CLE
SM_nRE
SM_nWE
SD_CLK/MS_BS/SM_nWP
SM_nCE
17
SM_nBR_R
RT18
33
SM_nBR
10
11
12
13
14
15
16
17
(SM_D0)
(SM_D1)
(SM_D2)
(SM_D3)
(SM_D4)
(SM_D5)
(SM_D6)
(SM_D7)
6
5
3
7
8
4
(SM_ALE)
(SM_CLE)
SM_nRE
SM_nWE
(SM_nWP)
SM_nCE
VDDA33/VDDPLLREF
9
VCC
CD0early
CD1
D0
D1
B/R
D2
D3 GND/CDlate
D4
D5
D6
nc1
D7
nc2
ALE
CLE
RE
WE
WP
CE
19
20
XD_CRDPWR
2
SM_nBR
1
GPIO14 (SM_nCD)
23
24
21
22
SHLD1
SHLD2
GND
C13
0.1uF
SM_B/R
37
VSS(FLAG)
BusPwr
5V_USB R14
ZERO
tp12
DNP
5V
U3
MIC37100-3.3WS_SOT223-3
1
3
VIN 3.3V_OUT
tp13
DNP
1.0uF
J1
3V3
GND
(SD_CMD)
2
(SD_DAT0)
(SD_DAT1)
(SD_DAT2)
(SD_DAT3)
7
8
9
1
5
(SD_CLK)
10
11
12
13
(SD_DAT4)
(SD_DAT5)
(SD_DAT6)
(SD_DAT7)
C21
C16
GPIO6<SD_WP>/MS_CLK/SM_D4
(SD_WP)
Series termination only
required if impedance
mis-matches from drivers
to line cause SI or EMI
issues.
10uF
2
20
21
Normal Mount
SD/MMC4.0
(Proconn)
CMD
VCC
4
CRD_PWR2
C7
0.1uF
D0
D1
D2
D3
3
6
GND1
GND2
CLK
D4
D5
D6
D7
14
15
DET
SD_WP
nc1
nc2
SD_nCD
(SD_WP)
16
17
18
19
SwGND1
SwGND2
SwGND3
SwGND4
J3
MS Normal Mount
Classic, Duo, ProHG
6
MS_INS
(MS_D0)
(MS_D1)
(MS_D2)
(MS_D3)
4
3
5
7
(MS_D4)
(MS_D5)
(MS_D6)
(MS_D7)
12
11
13
14
(MS_SCLK)
(MS_BS)
1
5V_EXT
3
R16
SelfPwr
ZERO
5V
2
Self-Power Option -- DNP
(De-pop R14 for Self-Power)
1.0uF
SelfPwr
Optional Signal EMI Capacitors -- DNP
Internal Regulator
Optional Capacitors -- DNP
VDD18PLL
C18
SelfPwr
C42
4.7pF
C2
0.1uF
0.1uF
9
VCC
17
18
nc1
nc2
D4
D5
D6
D7
C1
0.1uF
GND
GND
SCLK
BS
CRD_PWR2
1
10
TP17
p5x6mm
15
16
SHLD1
SHLD2
Optional EMI Via Bypass Capacitors -- DNP
3V3
SD_CLK/MS_BS/SM_nWP
VDD18
C10
D0/SDIO
D1
D2
D3
C28
C29
C30
C31
C32
C33
C34
C35
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
GPIO6<SD_WP>/MS_CLK/SM_D4
1
USBDP
L1
EMI
4
USBDM
C43
4.7pF
2
3
USBDP
USBDM
RT14
RT15
Zero USBDP
GPIO2
GPIO7
Zero USBDM
3
3V3
3V3
4
2
4
3
2
1
tp10
tp11
J5
SD_CMD/MS_D0/SM_CLE
tp14
EMI
0.1uF
EMI
C45
4.7pF
tp15
Upstream USB ESD/EMI
Treatments -- DNP
LED1_R
C46
BR1
BGX50A
LED2
ORANGE
C44
4.7pF
tp16
"Backlight"
3V3
Optional EMI Field Capacitors -- DNP
3V3
Test Points -- DNP
DLP11SN900SL2
3V3
1
2014 Microchip Technology Inc.
J6
8
2
INS
BL_K
R17
Do Not Populate.
Development configuration ONLY
470
CRD_PWR2
C25
C26
0.001uF
0.001uF
C36
C37
C38
0.1uF
0.1uF
0.1uF
C39
0.001uF
C40
0.001uF
C41
0.001uF
C22
0.001uF
C23
0.001uF
EVB-USB2240-IND
EVALUATION BOARD
USER’S GUIDE
Appendix C. Bill of Materials (BOM)
C.1
INTRODUCTION
This appendix includes the EVB-USB2240-IND Evaluation Board Bill of Materials (BOM).
2014 Microchip Technology Inc.
DS50002298B-page 23
Item Qty
EVB-USB2240-IND EVALUATION BOARD BILL OF MATERIALS
Qty
Populated
Reference Designator(s)
Description
Capacitor, 0.1uF, 6.3V, 10%, X5R, 0402
Manufacturer
Murata
Manufacturer Part Number
2014 Microchip Technology Inc.
1
9
9
C1,C4,C5,C6,C7,C12,C13,C17,
C20
2
2
2
C14,C19
Capacitor, 18pF, 50V, 5%, NPO, 0402
Murata
GRM1555C1H180JZ01D
3
1
1
C21
Capacitor, 10uF, 6.3VDC, 20%, X5R, 0603
Murata
GRM188R60J106ME47D
4
4
4
C3,C11,C15,C16
Capacitor, 1.0uF, 16VDC, 10%, X5R, 0603
Murata
GRM188R61C105KA93D
5
2
2
C8,C27
Capacitor, 4.7uF, 6.3VDC, 20%, X5R, 0603
Murata
GRM188R60J475KE19D
6
1
1
FB1
Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603
Murata
BLM18EG221SN1D
7
1
1
J1
Connector, SD/MMC4.0, Normal Mount, SMT
Proconn
SDC013-A0-5002
8
1
1
J2
Connector Housing Assembly, XD, SMT
Proconn
XDC020-A0-0000
9
1
1
J3
Connector, Mem. Stick, Classic-Duo-Pro-HG, Top
Mount, SMT
Proconn
MSCN14-X0-2200
10
1
1
J7
Receptacle, USB, Style B, Right Angle, Through-hole FCI
11
1
1
LED1
LED, Bright Green, 0603
Rohm
SML-412MWT86
12
1
1
LED3
LED, Bright Green, 0603
Rohm
SML-412MWT86
13
1
1
R10
Resistor, 12.0K, 1%, 1/16W, 0603
Panasonic
ERJ-3EKF1202V
14
2
2
R11,R13
Resistor, 100K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ104V
15
1
1
R14
Resistor, ZERO, 0.1W, 0603
Panasonic
ERJ-3GEY0R00V
16
1
1
R15
Resistor, 1Meg, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ105V
17
1
1
R19
Resistor, 330, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ331V
18
3
3
R3,R18,R21
Resistor, 10K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ103V
19
1
1
R4
Resistor, 2.2K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ222V
20
2
2
R7,R20
Resistor, 2.2K, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ222V
21
18
18
RT1,RT2,RT3,RT4,RT5,R5,RT6, Resistor, 33ohm, 5%, 1/20W, 0201
RT7,RT8,RT9,RT10,RT11,RT12,
R12,RT13,RT17,RT18, RT19
Rohm
MCR006YZPJ330
Rohm
Notes
GRM155R71A104KA01D
Critical Device
61729-x0xxBLF
22
3
3
RT20,RT21,RT22
Resistor, Zero, 5%, 1/20W, 0201
23
1
1
TP17
Pin, Ferrule, Uninsulated, for 0.5mm wire, 6mm long Phoenix Contact
3200218
MCR006YZPJ000
25
1
1
U1
IC, USB2240, USB 2.0 Bus Powered Flash Media
Controller, QFN-36B
SMSC
USB2240-AEZG
25
1
1
U3
IC, MIC37100-3.3WS, LDO Regulator, 3.3V, 1A,
SOT223-3
Micrel
MIC37100-3.3WS
26
1
1
Y1
Crystal, 24.000MHz, 50ppm, 18pF, HC-49SMT
Citizen America
HCM49-24.000MABJ-UT
Critical Device
EVB-USB2240-IND Evaluation Board User’s Guide
DS50002298B-page 24
TABLE C-1:
2014 Microchip Technology Inc.
TABLE C-1:
Item Qty
EVB-USB2240-IND EVALUATION BOARD BILL OF MATERIALS (CONTINUED)
Qty
Populated
Reference Designator(s)
Description
Manufacturer
Manufacturer Part Number
Notes
DS50002298B-page 25
27
1
0
BR1
Diode, Bridge, Switching, 50V, 140mA, KCAC,
SOT-143
Infineon Tech
BGX50A
Do Not Populate
28
1
0
C18
Capacitor, 1.0uF, 16VDC, 10%, X5R, 0603
Murata
GRM188R61C105KA93D
Do Not Populate
29
2
0
C2,C10
Capacitor, 0.1uF, 6.3V, 10%, X5R, 0402
Murata
GRM155R71A104KA01D
Do Not Populate
30
8
0
C22,C23,C24,C25,C26,C39,
C40,C41
Capacitor, 1000pF, 50V, 10%, X7R, 0402
Murata
GRM155R71H102KA01D
Do Not Populate
31
12
0
C28,C29,C30,C31,C32,C33,
C34,C35,C36,C37,C38,C46
Capacitor, 0.1uF, 6.3V, 10%, X5R, 0402
Murata
GRM155R71A104KA01D
Do Not Populate
32
4
0
C42,C43,C44,C45
Capacitor, 4.7pF, 50V, +/-0.25pF, NPO, 0402
Murata
GRM1555C1H4R7CZ01D
Do Not Populate
33
1
0
C9
Capacitor, 47uF, 16VDC, 20%, Aluminum, SMT,
5mm x 6mm
Panasonic
EEV-FK1C470UR
Do Not Populate
34
1
0
FB2
Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603
Murata
BLM18EG221SN1D
Do Not Populate
35
1
0
J5
Header, 1 x 4, 0.1 Inch, Vertical
AMP
9-146285-0
Do Not Populate
36
1
0
J6
Connector, Power Jack, 2.0mm, 12V, 4A, Right
Angle
Cui Stack
PJ-002AH
Do Not Populate
37
1
0
L1
Inductor, Common Mode Choke, DLP11SN900SL2,
0504
Murata
DLP11SN900SL2
Do Not Populate
38
1
0
LED2
LED, Orange, 5mm, TH, Right Angle
Dialight
550-2505
Do Not Populate
39
1
0
R16
Resistor, ZERO, 0.1W, 0603
Panasonic
ERJ-3GEY0R00V
Do Not Populate
40
1
0
R17
Resistor, 470, 5%, 1/16W, 0603
Panasonic
ERJ-3GEYJ471V
Do Not Populate
41
2
0
RT14,RT15
Resistor, Zero, 5%, 1/20W, 0201
Rohm
MCR006YZPJ000
Do Not Populate
42
10
0
tp1,tp8,tp9,tp10,tp11,tp12,
tp13,tp14,tp15,tp16
Header, 1 x 1, 0.1 Inch, Vertical
AMP
9-146285-0
Do Not Populate
43
1
0
U2
IC, 24C04, 2 Wire Serial EPROM, 4Kb, 2.5V, DFN-8
Microchip Technology
24LC04BT-I/MC
Do Not Populate
EVB-USB2240-IND Evaluation Board User’s Guide
NOTES:
2014 Microchip Technology Inc.
DS50002298B-page 26
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2943-5100
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-673-0699
Fax: 905-673-6509
DS50002298B-page 27
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
China - Hangzhou
Tel: 86-571-8792-8115
Fax: 86-571-8792-8116
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Germany - Pforzheim
Tel: 49-7231-424750
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Venice
Tel: 39-049-7625286
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Poland - Warsaw
Tel: 48-22-3325737
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
03/25/14
2014 Microchip Technology Inc.