SHCPA60FR SHCNA60FR SHCDA60FR SENSITRON _ SEMICONDUCTOR TCHNICAL DATA DATA SHEET 879, REV. C CENTER TAP/DOUBLER ASSEMBLY (COMMON CATHODE, COMMON ANODE, DOUBLER) DESCRIPTION: A 600 VOLT, 36 AMP, 190 NS ULTRAFAST CENTER TAP RECTIFIER. MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED RATING SYMBOL MAX. UNITS PIV 600 Volts IO 36 18 Amps IO 23.5 11.7 Amps PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG) IFSM 240 Amps MAXIMUM THERMAL RESISTANCE (PER LEG) RJC 0.9 C/W MAXIMUM OPERATING AND STORAGE TEMPERATURE TJ, stg -55 to + 150 C SYMBOL MAX. UNITS Vf 1.15 Volts Ir 10 A MAXIMUM REVERSE CURRENT Ir @ PIV (TC = 100 C) (PER LEG) Ir 250 A MAXIMUM REVERSE RECOVERY TIME trr 190 nsec PEAK INVERSE VOLTAGE (PER LEG) O MAXIMUM DC OUTPUT CURRENT (TC = 55 C) (PER LEG) (DOUBLER) O MAXIMUM DC OUTPUT CURRENT (TC = 100 C) (PER LEG) (DOUBLER) ELECTRICAL CHARACTRISTICS CHARACTRISTIC MAXIMUM FORWARD VOLTAGE DROP (PULSED) (PER LEG) (If = 9.0 AMPS) O MAXIMUM REVERSE CURRENT Ir @ PIV (TC = 25 C) (PER LEG) O (If = 0.5A, Ir = 1.0A, trr = 0.25A) Add suffix “L” to the part number for leaded version. ©2014 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 249798 www.sensitron.com [email protected] SHCPA60FR SHCNA60FR SHCDA60FR SENSITRON DATA SHEET 879, REV. C MECHANICAL DIMENSIONS: In inches / mm 1.00 Max. (25.40) .390 (9.906) .620 (15.75) .12 (3.05) .195 (4.95) .320 (8.13 .380 9.65) 2.25 (57.15) .370 (9.40 .430 10.92) 2 Places 1.870 (47.50) .065 (1.65) .125 (3.18) .382 (9.70) .170(4.32) Dia. Thru - 2Places .090(2.29) 3 Places SHCPA SHCNA – + AC SHCDA AC AC AC AC + – Fig. 417 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2014 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 249798 www.sensitron.com [email protected]