JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1876 1P2T SELF TERMINATING SOLID STATE RF SWITCH Frequency Range 20-6000 MHz Configuration 1P2T Self Terminating Impedance 50 Ohms nominal VSWR 1.25:1 typical 20-2000MHz 1.50:1 typical 2000-6000MHz 1.80:1 maximum 20-6000MHz Insertion Loss 1.25 dB typical 20-2000 MHz 1.75 dB typical 2000-6000 MHz 2.50 dB maximum 20-6000 MHz Isolation 75 70 65 55 Switching Speed 10 microseconds maximum 5 microseconds typical (OFF-ON) 2 microseconds typical (ON-OFF) (50% TTL to 10% or 90% RF) RF Input Power +26 dBm average (Hot Switchable) Control Logic (1 Lines) TTL "Low" (0-0.8 Vdc) for COM to J1 and J2 Terminated TTL "High" (2.0-5.0 Vdc)for COM to J2 and J1 terminated DC Supply +5 Vdc @ 10 mA nominal DC Connector 4 Pin (MOLEX #22-11-2042) Mating Connector: (MOLEX #22-01-3047) RF Connector SMA female Operating Temperature Range -40ºC to +85ºC Storage Temperature Range -55ºC to +90ºC Physical Size See outline drawing 092-6533 ECR/ECN # 19647 Page 1 of 1 DATE 10/20/2010 01/28/2011 REV A APPR / DATE dB dB dB dB typical typical typical minimum ECR/ECN # BAC 10/20/2010 BAC 01/28/2011 JFW FORM E-7-F REV F DATE 20-2000 MHz 2000-4000 MHz 4000-6000 MHz 20-6000 MHz REV APPR / DATE