Specs

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50S-1954
1P2T SELF TERMINATING SOLID STATE RF SWITCH
Frequency Range
0.5-2000 MHz
Configuration
1P2T Self Terminating
Impedance
50 Ohms nominal
VSWR
1.4:1 maximum
Insertion Loss
1.8 dB maximum
1.1 dB typical @ 0.5 MHz
1.4 dB typical @ 2000 MHz
Isolation
60 dB minimum
80 dB typical @ 500 MHz
70 dB typical @ 2000 MHz
Switching Speed
25 microseconds maximum
(50% TTL to 10% or 90% RF)
RF Input Power
+26 dBm average (Hot Switchable)
Control Logic (1 Line)
TTL "Low" (0-0.8 Vdc) for COM to J1 and
J2 Terminated
TTL "High" (2.0-5.0 Vdc)for COM to J2
and J1 terminated
DC Supply
+5 Vdc @ 10 mA nominal
DC Connector
4 Pin (MOLEX #22-11-2042)
Mating Connector: (MOLEX #22-01-3047)
RF Connector
SMA female
Operating Temperature Range
-40ºC to +85ºC
Storage Temperature Range
-55ºC to +90ºC
Physical Size
See outline drawing 092-6533
ECR/ECN #
DATE
11/09/2011
Page 1 of 1
REV
APPR / DATE
ECR/ECN #
TRS 11/09/2011
JFW FORM E-7-F REV F
DATE
REV
APPR / DATE